board: Add Sony Ericsson J100I Phone

[fw/openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 45454faf703c4ae78a94035a639a37765971cce9..91c50f1a49b1024434f4d951075744cc0d37a274 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -4227,12 +4227,10 @@ The following target events are defined:
 @* The target has resumed (i.e.: gdb said run)
 @item @b{early-halted}
 @* Occurs early in the halt process
-@ignore
-@item @b{examine-end}
-@* Currently not used (goal: when JTAG examine completes)
 @item @b{examine-start}
-@* Currently not used (goal: when JTAG examine starts)
-@end ignore
+@* Before target examine is called.
+@item @b{examine-end}
+@* After target examine is called with no errors.
 @item @b{gdb-attach}
 @* When GDB connects. This is before any communication with the target, so this
 can be used to set up the target so it is possible to probe flash. Probing flash
@@ -4255,12 +4253,6 @@ depending on whether the breakpoint is in RAM or read only memory.
 @* Before the target steps, gdb is trying to start/resume the target
 @item @b{halted}
 @* The target has halted
-@ignore
-@item @b{old-gdb_program_config}
-@* DO NOT USE THIS: Used internally
-@item @b{old-pre_resume}
-@* DO NOT USE THIS: Used internally
-@end ignore
 @item @b{reset-assert-pre}
 @* Issued as part of @command{reset} processing
 after @command{reset_init} was triggered
@@ -4320,13 +4312,10 @@ when reset disables PLLs needed to use a fast clock.
 @* Before any target is resumed
 @item @b{resume-end}
 @* After all targets have resumed
-@item @b{resume-ok}
-@* Success
 @item @b{resumed}
 @* Target has resumed
 @end itemize
 
-
 @node Flash Commands
 @chapter Flash Commands