@section Stand alone Systems
-@b{ZY1000} See: @url{http://www.zylin.com/zy1000.html} Technically, not a
+@b{ZY1000} See: @url{http://www.ultsol.com/index.php/component/content/article/8/33-zylin-zy1000-jtag-probe} Technically, not a
dongle, but a standalone box. The ZY1000 has the advantage that it does
not require any drivers installed on the developer PC. It also has
a built in web interface. It supports RTCK/RCLK or adaptive clocking
@itemize @bullet
@item @b{usbjtag}
-@* Link @url{http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html}
+@* Link @url{http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html}
@item @b{jtagkey}
@* See: @url{http://www.amontec.com/jtagkey.shtml}
@item @b{jtagkey2}
Stellaris eval boards, they can be used to debug other target boards.
@item @b{olimex-jtag}
@* See: @url{http://www.olimex.com}
-@item @b{flyswatter}
+@item @b{Flyswatter/Flyswatter2}
@* See: @url{http://www.tincantools.com}
@item @b{turtelizer2}
@* See:
@item @b{stm32stick}
@* Link @url{http://www.hitex.com/stm32-stick}
@item @b{axm0432_jtag}
-@* Axiom AXM-0432 Link @url{http://www.axman.com}
+@* Axiom AXM-0432 Link @url{http://www.axman.com} - NOTE: This JTAG does not appear
+to be available anymore as of April 2012.
@item @b{cortino}
@* Link @url{http://www.hitex.com/index.php?id=cortino}
@item @b{dlp-usb1232h}
@* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
+@item @b{digilent-hs1}
+@* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1}
@end itemize
@section USB-JTAG / Altera USB-Blaster compatibles
@itemize
@item @b{USB-JTAG} Kolja Waschk's USB Blaster-compatible adapter
-@* Link: @url{http://www.ixo.de/info/usb_jtag/}
+@* Link: @url{http://ixo-jtag.sourceforge.net/}
@item @b{Altera USB-Blaster}
@* Link: @url{http://www.altera.com/literature/ug/ug_usb_blstr.pdf}
@end itemize
@item @b{SEGGER JLINK}
@* Link: @url{http://www.segger.com/jlink.html}
@item @b{IAR J-Link}
-@* Link: @url{http://www.iar.com/website1/1.0.1.0/369/1/index.php}
+@* Link: @url{http://www.iar.com/en/products/hardware-debug-probes/iar-j-link/}
@end itemize
@section USB RLINK based
@itemize @bullet
@item @b{Raisonance RLink}
-@* Link: @url{http://www.raisonance.com/products/RLink.php}
+@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html}
@item @b{STM32 Primer}
@* Link: @url{http://www.stm32circle.com/resources/stm32primer.php}
@item @b{STM32 Primer2}
@section USB ST-LINK based
ST Micro has an adapter called @b{ST-LINK}.
-They only works with ST Micro chips, notably STM32 and STM8.
+They only work with ST Micro chips, notably STM32 and STM8.
@itemize @bullet
@item @b{ST-LINK}
For info the original ST-LINK enumerates using the mass storage usb class, however
it's implementation is completely broken. The result is this causes issues under linux.
-The simplest solution is to get linux to ignore the ST-LINK using one of the following method's:
+The simplest solution is to get linux to ignore the ST-LINK using one of the following methods:
@itemize @bullet
@item modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:i
@item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf
@item @b{flashlink}
@* From ST Microsystems;
-@uref{http://www.st.com/stonline/@/products/literature/um/7889.pdf,
-FlashLINK JTAG programing cable for PSD and uPSD}
+@* Link: @url{http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/DM00039500.pdf}
@end itemize
For an example of this scheme see LPC2000 target config files.
-The @code{init_boards} procedure is a similar concept concerning board config files (@xref{The init_board procedure}).
+The @code{init_boards} procedure is a similar concept concerning board config files (@xref{The init_board procedure}.)
@subsection ARM Core Specific Hacks
option. When vendors put out multiple versions of a chip, or use the same
JTAG-level ID for several largely-compatible chips, it may be more practical
to ignore the version field than to update config files to handle all of
-the various chip IDs.
+the various chip IDs. The version field is defined as bit 28-31 of the IDCODE.
@item @code{-ircapture} @var{NUMBER}
@*The bit pattern loaded by the TAP into the JTAG shift register
on entry to the @sc{ircapture} state, such as 0x01.
@comment - defines mass_erase ... pointless given flash_erase_address
@end deffn
-@deffn {Flash Driver} ecosflash
-@emph{No idea what this is...}
-The @var{ecosflash} driver defines one mandatory parameter,
-the name of a modules of target code which is downloaded
-and executed.
-@end deffn
-
@deffn {Flash Driver} lpc2000
Most members of the LPC1700 and LPC2000 microcontroller families from NXP
include internal flash and use Cortex-M3 (LPC1700) or ARM7TDMI (LPC2000) cores.
flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
@end example
+If you have a target with dual flash banks then define the second bank
+as per the following example.
+@example
+flash bank $_FLASHNAME stm32f1x 0x08080000 0 0 0 $_TARGETNAME
+@end example
+
Some stm32f1x-specific commands
@footnote{Currently there is a @command{stm32f1x mass_erase} command.
That seems pointless since the same effect can be had using the
projects / fw / openocd / blobdiff