OpenOCD internally. @xref{Debug Adapter Hardware}.
@b{GDB Debug:} It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T,
-ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x) and
-Cortex-M3 (Stellaris LM3, ST STM32 and Energy Micro EFM32) based cores to be
-debugged via the GDB protocol.
+ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M3
+(Stellaris LM3, ST STM32 and Energy Micro EFM32) and Intel Quark (x10xx)
+based cores to be debugged via the GDB protocol.
@b{Flash Programming:} Flash writing is supported for external
CFI-compatible NOR flashes (Intel and AMD/Spansion command set) and several
to fill in the gaps. All of the source files are provided in-tree,
listed in the Doxyfile configuration at the top of the source tree.
+@section Gerrit Review System
+
+All changes in the OpenOCD Git repository go through the web-based Gerrit
+Code Review System:
+
+@uref{http://openocd.zylin.com/}
+
+After a one-time registration and repository setup, anyone can push commits
+from their local Git repository directly into Gerrit.
+All users and developers are encouraged to review, test, discuss and vote
+for changes in Gerrit. The feedback provides the basis for a maintainer to
+eventually submit the change to the main Git repository.
+
+The @file{HACKING} file, also available as the Patch Guide in the Doxygen
+Developer Manual, contains basic information about how to connect a
+repository to Gerrit, prepare and push patches. Patch authors are expected to
+maintain their changes while they're in Gerrit, respond to feedback and if
+necessary rework and push improved versions of the change.
+
@section OpenOCD Developer Mailing List
The OpenOCD Developer Mailing List provides the primary means of
@uref{https://lists.sourceforge.net/mailman/listinfo/openocd-devel}
-Discuss and submit patches to this list.
-The @file{HACKING} file contains basic information about how
-to prepare patches.
-
@section OpenOCD Bug Database
During the 0.4.x release cycle the OpenOCD project team began
@end deffn
@deffn {Interface Driver} {cmsis-dap}
-CMSIS-DAP compliant based adapter.
+ARM CMSIS-DAP compliant based adapter.
@deffn {Config Command} {cmsis_dap_vid_pid} [vid pid]+
The vendor ID and product ID of the CMSIS-DAP device. If not specified
-known default values are used.
+the driver will attempt to auto detect the CMSIS-DAP device.
Currently, up to eight [@var{vid}, @var{pid}] pairs may be given, e.g.
@example
cmsis_dap_vid_pid 0xc251 0xf001 0x0d28 0x0204
by using @command{targets} command with the name of the
target which should become current.
-@deffn Command reg [(number|name) [value]]
+@deffn Command reg [(number|name) [(value|'force')]]
Access a single register by @var{number} or by its @var{name}.
The target must generally be halted before access to CPU core
registers is allowed. Depending on the hardware, some other
are flagged as such.
@emph{With number/name}: display that register's value.
+Use @var{force} argument to read directly from the target,
+bypassing any internal cache.
@emph{With both number/name and value}: set register's value.
Writes may be held in a writeback cache internal to OpenOCD,
@xref{targetevents,,Target Events}.
@end deffn
+@section Intel Architecture
+
+Intel Quark X10xx is the first product in the Quark family of SoCs. It is an IA-32
+(Pentium x86 ISA) compatible SoC. The core CPU in the X10xx is codenamed Lakemont.
+Lakemont version 1 (LMT1) is used in X10xx. The CPU TAP (Lakemont TAP) is used for
+software debug and the CLTAP is used for SoC level operations.
+Useful docs are here: https://communities.intel.com/community/makers/documentation
+@itemize
+@item Intel Quark SoC X1000 OpenOCD/GDB/Eclipse App Note (web search for doc num 330015)
+@item Intel Quark SoC X1000 Debug Operations User Guide (web search for doc num 329866)
+@item Intel Quark SoC X1000 Datasheet (web search for doc num 329676)
+@end itemize
+
+@subsection x86 32-bit specific commands
+The three main address spaces for x86 are memory, I/O and configuration space.
+These commands allow a user to read and write to the 64Kbyte I/O address space.
+
+@deffn Command {x86_32 idw} address
+Display the contents of a 32-bit I/O port from address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 idh} address
+Display the contents of a 16-bit I/O port from address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 idb} address
+Display the contents of a 8-bit I/O port from address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 iww} address
+Write the contents of a 32-bit I/O port to address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 iwh} address
+Write the contents of a 16-bit I/O port to address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 iwb} address
+Write the contents of a 8-bit I/O port to address range 0x0000 - 0xffff.
+@end deffn
+
@section OpenRISC Architecture
The OpenRISC CPU is a soft core. It is used in a programmable SoC which can be
projects / fw / openocd / blobdiff