ft2232: Support for Digilent HS1 USB adapter

[fw/openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 323136f373813f7bf447fa79fca893ae7a3fdf88..55fbf4ff386897af3580165900e6818660f0953b 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -374,6 +374,8 @@ Stellaris eval boards, they can be used to debug other target boards.
 @* Link @url{http://www.hitex.com/index.php?id=cortino}
 @item @b{dlp-usb1232h}
 @* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
+@item @b{digilent-hs1}
+@* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1}
 @end itemize
 
 @section USB-JTAG / Altera USB-Blaster compatibles
@@ -4654,13 +4656,6 @@ The AVR 8-bit microcontrollers from Atmel integrate flash memory.
 @comment - defines mass_erase ... pointless given flash_erase_address
 @end deffn
 
-@deffn {Flash Driver} ecosflash
-@emph{No idea what this is...}
-The @var{ecosflash} driver defines one mandatory parameter,
-the name of a modules of target code which is downloaded
-and executed.
-@end deffn
-
 @deffn {Flash Driver} lpc2000
 Most members of the LPC1700 and LPC2000 microcontroller families from NXP
 include internal flash and use Cortex-M3 (LPC1700) or ARM7TDMI (LPC2000) cores.
@@ -4912,6 +4907,12 @@ the chip identification register, and autoconfigures itself.
 flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
 @end example
 
+If you have a target with dual flash banks then define the second bank
+as per the following example.
+@example
+flash bank $_FLASHNAME stm32f1x 0x08080000 0 0 0 $_TARGETNAME
+@end example
+
 Some stm32f1x-specific commands
 @footnote{Currently there is a @command{stm32f1x mass_erase} command.
 That seems pointless since the same effect can be had using the