@deffn {Config Command} {ftdi_location} <bus>-<port>[.<port>]...
@emph{DEPRECATED -- avoid using this.
-Use the @xref{adapter_usb_location, adapter usb location} command instead.}
+Use the command @ref{adapter_usb_location,,adapter usb location} instead.}
Specifies the physical USB port of the adapter to use. The path
roots at @var{bus} and walks down the physical ports, with each
@subsection Cortex-M specific commands
@cindex Cortex-M
-@deffn Command {cortex_m maskisr} (@option{auto}|@option{on}|@option{off})
+@deffn Command {cortex_m maskisr} (@option{auto}|@option{on}|@option{off}|@option{steponly})
Control masking (disabling) interrupts during target step/resume.
The @option{auto} option handles interrupts during stepping in a way that they
are enabled again. If the interrupt handlers don't complete within 500ms,
the step command leaves with the core running.
+The @option{steponly} option disables interrupts during single-stepping but
+enables them during normal execution. This can be used as a partial workaround
+for 702596 erratum in Cortex-M7 r0p1. See "Cortex-M7 (AT610) and Cortex-M7 with
+FPU (AT611) Software Developer Errata Notice" from ARM for further details.
+
Note that a free hardware (FPB) breakpoint is required for the @option{auto}
option. If no breakpoint is available at the time of the step, then the step
is taken with interrupts enabled, i.e. the same way the @option{off} option