doc: remove non-existing command riscv set_scratch_ram

[fw/openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 85dc432da0e987e7b6997fa49a9a058d347b5823..40a3f2791bcec6efd4c91c692cc8f19560b84b3e 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -10199,11 +10199,6 @@ Set the maximum time to wait for a hart to come out of reset after reset is
 deasserted.
 @end deffn
 
-@deffn {Command} {riscv set_scratch_ram} none|[address]
-Set the address of 16 bytes of scratch RAM the debugger can use, or 'none'.
-This is used to access 64-bit floating point registers on 32-bit targets.
-@end deffn
-
 @deffn {Command} {riscv set_prefer_sba} on|off
 When on, prefer to use System Bus Access to access memory.  When off (default),
 prefer to use the Program Buffer to access memory.