flash: nor: ath79: remove base calculation

[fw/openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index aa901e6e49a874378d4ebfcbd76e948fabd67588..21b55dca01fda9609f4de9d9ecea5bbb4a9ab2d4 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -5347,12 +5347,12 @@ since the alternate function must be enabled on the GPIO pin
 CS1/CS2 is routed to on the given SoC.
 
 @example
-flash bank $_FLASHNAME ath79 0 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME ath79 0xbf000000 0 0 0 $_TARGETNAME
 
 # When using multiple chipselects the base should be different for each,
 # otherwise the write_image command is not able to distinguish the
 # banks.
-flash bank flash0 ath79 0x00000000 0 0 0 $_TARGETNAME cs0
+flash bank flash0 ath79 0xbf000000 0 0 0 $_TARGETNAME cs0
 flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1
 flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2
 @end example
@@ -5900,8 +5900,8 @@ Command disables watchdog timer.
 @deffn {Flash Driver} lpc2000
 This is the driver to support internal flash of all members of the
 LPC11(x)00 and LPC1300 microcontroller families and most members of
-the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4000 and LPC54100
-microcontroller families from NXP.
+the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4000, LPC54100,
+LPC8Nxx and NHS31xx microcontroller families from NXP.
 
 @quotation Note
 There are LPC2000 devices which are not supported by the @var{lpc2000}
@@ -5926,7 +5926,7 @@ LPC43x[2357])
 @option{lpc54100} (LPC541xx)
 @option{lpc4000} (LPC40xx)
 or @option{auto} - automatically detects flash variant and size for LPC11(x)00,
-LPC8xx, LPC13xx, LPC17xx and LPC40xx
+LPC8xx, LPC13xx, LPC17xx, LPC40xx, LPC8Nxx and NHS31xx
 @item @var{clock_kHz} ... the frequency, in kiloHertz,
 at which the core is running
 @item @option{calc_checksum} ... optional (but you probably want to provide this!),
@@ -6891,6 +6891,17 @@ the flash clock.
 @end deffn
 @end deffn
 
+@deffn {Flash Driver} w600
+W60x series Wi-Fi SoC from WinnerMicro
+are designed with ARM Cortex-M3 and have 1M Byte QFLASH inside.
+The @var{w600} driver uses the @var{target} parameter to select the
+correct bank config.
+
+@example
+flash bank $_FLASHNAME w600 0x08000000 0 0 0 $_TARGETNAMEs
+@end example
+@end deffn
+
 @deffn {Flash Driver} xmc1xxx
 All members of the XMC1xxx microcontroller family from Infineon.
 This driver does not require the chip and bus width to be specified.