what you give them. Help stamp out software-hoarding!
-------------------------------------------------------------------------*/
-unsigned char _gptrget ()
+/* not all devices use P2 to page pdata memory, therefore __XPAGE was
+ introduced. On some targets __XPAGE itself is a paged SFR so it is
+ not safe for all platforms to set this. Furthermore some targets
+ can be configured to behave differently for movx @dptr vs. movx @Ri
+ (don't drive high byte of address bus for movx @Ri only) */
+#define USE_PDATA_PAGING_REGISTER 0
+
+__sbit __at (0xF7) B_7;
+__sbit __at (0xF6) B_6;
+__sbit __at (0xF5) B_5;
+
+/* the return value is expected to be in acc, and not in the standard
+ * location dpl. Therefore we choose return type void here: */
+#if defined DSDCC_MODEL_HUGE
+void
+_gptrget (char *gptr) _naked
+{
+/* This is the banked version with pointers up to 23 bits.
+ B cannot be trashed */
+
+ gptr; /* hush the compiler */
+
+ _asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ jb _B_7,codeptr$ ; >0x80 code ; 3
+ jnb _B_6,xdataptr$ ; <0x40 far ; 3
+
+ mov dph,r0 ; save r0 independant of regbank ; 2
+ mov r0,dpl ; use only low order address ; 2
+
+ jb _B_5,pdataptr$ ; >0x60 pdata ; 3
+ ;
+ ; Pointer to data space
+ ;
+ mov a,@r0 ; 1
+ mov r0,dph ; restore r0 ; 2
+ mov dph,#0 ; restore dph ; 2
+ ret ; 1
+ ;
+ ; pointer to external stack or pdata
+ ;
+ pdataptr$:
+ movx a,@r0 ; 1
+ mov r0,dph ; restore r0 ; 2
+ mov dph,#0 ; restore dph ; 2
+ ret ; 1
+ ;
+ ; pointer to code area
+ ;
+ codeptr$:
+ ; implementation for SiLabs C8051F12x
+ mov a,b ; 2
+ anl a,0x03 ; 2
+ swap a ; 1
+ anl _PSBANK,#0x0F ; 3
+ orl _PSBANK,a ; 2
+
+ clr a ; 1
+ movc a,@a+dptr ; 1
+ ret ; 1
+ ;
+ ; pointer to xternal data
+ ;
+ xdataptr$:
+ ; implementation for xram a16-a21 tied to P3
+ mov _P3,b ; 3
+
+ movx a,@dptr ; 1
+ ret ; 1
+ ;===
+ ;43 bytes
+ _endasm ;
+}
+
+#elif defined DSDCC_MODEL_MEDIUM
+
+void
+_gptrget (char *gptr) _naked
+{
+/* This is the non-banked version with pointers up to 15 bits.
+ Assumes B is free to be used */
+
+ gptr; /* hush the compiler */
+
+ _asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ mov b,dph ; 3
+ jb _B_7,codeptr$ ; >0x80 code ; 3
+ jnb _B_6,xdataptr$ ; <0x40 far ; 3
+
+ mov b,r0 ; save r0 independant of regbank ; 2
+ mov r0,dpl ; use only low order address ; 2
+
+ jb _B_5,pdataptr$ ; >0x60 pdata ; 3
+ ;
+ ; Pointer to data space
+ ;
+ mov a,@r0 ; 1
+ mov r0,b ; restore r0 ; 2
+ ret ; 1
+ ;
+ ; pointer to xternal stack or pdata
+ ;
+ pdataptr$:
+ movx a,@r0 ; 1
+ mov r0,b ; restore r0 ; 2
+ ret ; 1
+ ;
+ ; pointer to code area, max 15 bits
+ ;
+ codeptr$:
+ ; 0x8000 <= dptr <= 0xFFFF
+ ; no need to AND dph and restore from B if hardware wraps code memory
+ anl dph,#0x7F ; 3
+ clr a ; 1
+ movc a,@a+dptr ; 1
+ mov dph,b ; 3
+ ret ; 1
+ ;
+ ; pointer to xternal data, max 14 bits
+ ;
+ xdataptr$:
+ ; 0 <= dptr <= 0x3FFF
+ movx a,@dptr ; 1
+ ret ; 1
+ ;===
+ ;35 bytes
+ _endasm ;
+}
+
+#elif 1
+
+void
+_gptrget (char *gptr) _naked
+{
+/* This is the new version with pointers up to 16 bits.
+ B cannot be trashed */
+
+ gptr; /* hush the compiler */
+
+ _asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ jb _B_7,codeptr$ ; >0x80 code ; 3
+ jnb _B_6,xdataptr$ ; <0x40 far ; 3
+
+ mov dph,r0 ; save r0 independant of regbank ; 2
+ mov r0,dpl ; use only low order address ; 2
+
+ jb _B_5,pdataptr$ ; >0x60 pdata ; 3
+ ;
+ ; Pointer to data space
+ ;
+ mov a,@r0 ; 1
+ mov r0,dph ; restore r0 ; 2
+ mov dph,#0 ; restore dph ; 2
+ ret ; 1
+ ;
+ ; pointer to xternal stack or pdata
+ ;
+ pdataptr$:
+ movx a,@r0 ; 1
+ mov r0,dph ; restore r0 ; 2
+ mov dph,#0 ; restore dph ; 2
+ ret ; 1
+ ;
+ ; pointer to code area, max 16 bits
+ ;
+ codeptr$:
+ clr a ; 1
+ movc a,@a+dptr ; 1
+ ret ; 1
+ ;
+ ; pointer to xternal data, max 16 bits
+ ;
+ xdataptr$:
+ movx a,@dptr ; 1
+ ret ; 1
+ ;===
+ ;30 bytes
+ _endasm ;
+}
+
+#else
+
+void
+_gptrget (char *gptr) _naked
+{
+/* This is the old version with pointers up to 16 bits. */
+
+ gptr; /* hush the compiler */
+
+ _asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ mov a,b ; 2
+ jz 00001$ ; 0 near ; 2
+ dec a ; 1
+ jz 00002$ ; 1 far ; 2
+ dec a ; 1
+ jz 00003$ ; 2 code ; 2
+ dec a ; 1
+ jz 00004$ ; 3 pdata ; 2
+ dec a ; 4 skip generic pointer ; 1
+ dec a ; 1
+ jz 00001$ ; 5 idata ; 2
+ ;
+ ; any other value for type
+ ; return xFF
+ mov a,#0xff ; 2
+ ret ; 1
+ ;
+ ; Pointer to data space
+ ;
+ 00001$:
+ push ar0 ; 2
+ ;
+ mov r0,dpl ; use only low order address ; 2
+ mov a,@r0 ; 1
+ ;
+ pop ar0 ; 2
+ ;
+ ret ; 1
+ ;
+ ; pointer to xternal data
+ ;
+ 00002$:
+ movx a,@dptr ; 1
+ ret ; 1
+;
+; pointer to code area
+;
+ 00003$:
+ ; clr a is already 0
+ movc a,@a+dptr ; 1
+ ret ; 1
+;
+; pointer to xternal stack or pdata
+;
+ 00004$:
+#if USE_PDATA_PAGING_REGISTER
+ mov dph,__XPAGE ; __XPAGE (usually p2) holds high byte for pdata access
+ movx a,@dptr
+#else
+ push ar0 ; 2
+ mov r0,dpl ; 2
+ movx a,@r0 ; 1
+ pop ar0 ; 2
+#endif
+ ret ; 1
+ ;===
+ ;40 bytes
+ _endasm ;
+}
+#endif
+
+#ifdef SDCC_ds390
+/* the return value is expected to be in acc/_ap, and not in the standard
+ * location dpl/dph. Therefore we choose return type void here: */
+
+#if 1
+
+void
+_gptrgetWord (unsigned *gptr)
{
+/* This is the new version */
+ gptr; /* hush the compiler */
+
+ _asm
+ ;
+ ; depending on the pointer type acc. to SDCCsymt.h
+ ;
+ jb _B_7,00003$ ; >0x80 code
+ jnb _B_6,00002$ ; <0x40 far
+
+ mov dph,r0 ; save r0 independant of regbank
+ mov r0,dpl ; use only low order address
+
+ jb _B_5,00004$ ; >0x60 pdata
+ ;
+ ; Pointer to data space
+ ;
+ mov _ap,@r0
+ inc r0
+ mov a,@r0
+ inc dpl
+ sjmp 00005$
+ ;
+ ; pointer to xternal data
+ ;
+ 00002$:
+ movx a,@dptr
+ mov _ap,a
+ inc dptr
+ movx a,@dptr
+ sjmp 00006$
+;
+; pointer to code area
+;
+ 00003$:
+ clr a
+ movc a,@a+dptr
+ mov _ap,a
+ clr a
+ inc dptr
+ movc a,@a+dptr
+ sjmp 00006$
+;
+; pointer to xternal stack
+;
+ 00004$:
+ movx a,@r0
+ mov _ap,a
+ inc r0
+ movx a,@r0
+ inc dpl
+;
+; restore and return
+;
+ 00005$:
+ mov r0,dph ; restore r0
+ mov dph,#0 ; restore dph
+ 00006$:
+ _endasm ;
+
+}
+
+#else
+
+void
+_gptrgetWord (unsigned *gptr)
+{
+ gptr; /* hush the compiler */
+
_asm
- ; save values passed
- xch a,r0
- push acc
;
; depending on the pointer type acc. to SDCCsymt.h
;
mov a,b
- jz 00001$ ; 0 near
- dec a
- jz 00002$ ; 1 far
+ jz 00001$ ; 0 near
+ dec a
+ jz 00002$ ; 1 far
+ dec a
+ jz 00003$ ; 2 code
dec a
- jz 00003$ ; 2 code
- dec a
- jz 00004$
- dec a ; 4 skip generic pointer
- dec a
- jz 00001$ ; 5 idata
+ jz 00004$ ; 3 pdata
+ dec a ; 4 skip generic pointer
+ dec a
+ jz 00001$ ; 5 idata
;
; any other value for type
; return xFF
- mov a,#0xff
- sjmp 00005$
+ mov a,#0xff
+ sjmp 00006$
;
; Pointer to data space
;
00001$:
- mov r0,dpl ; use only low order address
- mov a,@r0
+ push ar0
+ mov r0,dpl ; use only low order address
+ mov _ap,@r0
+ inc r0
+ mov a,@r0
+ inc dpl
sjmp 00005$
;
; pointer to xternal data
;
00002$:
movx a,@dptr
- sjmp 00005$
+ mov _ap,a
+ inc dptr
+ movx a,@dptr
+ sjmp 00006$
;
; pointer to code area
;
00003$:
- ; clr a is already 0
+ ; clr a is already 0
movc a,@a+dptr
- sjmp 00005$
+ mov _ap,a
+ clr a
+ inc dptr
+ movc a,@a+dptr
+ sjmp 00006$
;
; pointer to xternal stack
;
00004$:
- mov r0,dpl
+ push ar0
+ mov r0,dpl
movx a,@r0
+ mov _ap,a
+ inc r0
+ movx a,@r0
+ inc dpl
;
; restore and return
;
- 00005$:
- mov r0,a
- pop acc
- xch a,r0
- _endasm ;
+00005$:
+ pop ar0
+00006$:
+ _endasm ;
}
+#endif
+
+#endif