sdcc/debugger
--------------
-I (MLH) no nothing about this directory :)
+SDCDB debugger
+======================
+Notes April 23, 2003
+
+Martin Helmling added support for ddd GUI debugger.
+Code added to display assembly, set variables, and other commands
+to interface to ddd.
+
+From Martins email:
+
+in the attachment is my actual patch.
+
+The 'up' and 'down' stack commands are not implemented.
+But the features for 'ddd' to see bopth the c source and the assembler
+works,
+also the display of variables.
+Set variables are only implemented for basic types.
+Register variables can also displayed, but here I think a problem in the
+*.cdb file exists.
+Sometimes the register name not exists:
+
+S:LcacheTxAnalogValue$offset$1$1({1}SC:U),E,0,0
+S:LcacheTxAnalogValue$i$1$1({1}SC:S),R,0,0,[]
+S:LcacheTxAnalogValue$val$1$1({4}ST__00020000:S),E,0,0
+S:LcacheTxAnalogValue$value$1$1({1}SC:U),R,0,0,[]
+S:LcacheTxAnalogValue$sloc0$1$0({4}SL:U),E,0,0
+S:LsetRelays$addr$1$1({1}SC:U),R,0,0,[r2]
+S:LsetRelays$state$1$1({1}SC:U),R,0,0,[r3]
+S:LsetRelays$value$1$1({1}SC:U),R,0,0,[r5]
+S:L_main$i$1$1({1}SC:U),R,0,0,[]
+S:L_main$j$1$1({1}SC:U),R,0,0,[r3]
+S:L_main$ok$1$1({1}SC:U),R,0,0,[r3]
+
+the empty [] I mean !!
+
+Is this a known bug in sdcc ?
+
+Also sometimes not the correct breakpoints for stepping found in sdcdb.
+I try to fix this tomorrow.
+
+
+
+Notes Feb 10, 2002 - Karl Bongers
+
+SDCDB is a debugger for SDCC compiler. It works as a front
+end to the ucSim simulator/disassembler program.
+
+WARNING: SDCDB is EXPERIMENTAL and NOT A FULLY FUNCTIONING TOOL.
+
+SDCDB does hold out promise for a nice debugger tool that
+could integrate well with ucSim and other SDCC tools. It has
+some nice functionality that could augment ucSim nicely.
+It reads in a lot of symbolic information from the .CDB
+debug files as well as the source code and assembly
+listings referred to in these CDB files.
+This can be used to display your program data, list
+c or asm source code and set breakpoints.
+
+Unfortunately, SDCDB is not quite finished and does not
+function well enough yet to recommend for general use.
+
+
+Usage Notes
+======================
+Compile with --debug option:
+sdcc --debug hi.c
+This should generate .cdb symbolic debug files.
+
+Load sdcdb, like this:
+sdcdb hi.ihx
+
+Then you need to do an initial "run" command. It should hopefully
+stop somewhere at the main() entrypoint.
+
+Now you should be able to list code, and set breakpoints. Type
+"c" to continue running to a breakpoint, or type "s" to single
+step or "n" to skip function calls. Tpye "help" for a summary
+of commands.
+
+Use a preceeding bang("!") to do s51 simulator commands. So for
+example:
+!pc
+will send the "pc" command to ucSim and
+give you the program counter and list the current line of assembly.
+!help
+will give you the brief command line help listing of ucSim. But
+this help will scroll of the screen. So to get a list, I redirect
+stdout to a text file to examine like this:
+sdcdb hi.ihx 2>&1 | tee sdcdb.log
+
+Type '.' to toggle to a full time ucSim prompt.
+
+
+SDCDB problem areas.
+======================
+
+Ok, so what are some of its problems? Lets try to itemize
+them so we can fix them:
+
+* It hangs sometimes when trying to do step or next.
+
+ This probably has something to do with the context
+ sdcdb tries to build dynamically. Sdcdb tries to
+ trace program operation by placing hidden breakpoints
+ and stepping threw the simulation between these.
+
+* Does not print variables properly. Seems to use the
+ wrong address for the variable. (fixed)
+
+* ASM listing not implemented.
+ This should be easy enough to add. This feature
+ really needs to be implemented before this is a useful
+ tool. That or addresses of code functions need to be
+ readily available for raw ucSim commands.
+
+* No way to browse symbols, files names.
+ Preferably, it is easy to learn the addresses of variables
+ and functions too.
+ (working on this... see new ls,lm,lf commands)
+
+* Does not allow listing, setting breakpoints or viewing variables
+ before starting the simulation.
+ (I am fixing now, partly fixed)
+
+* p codestr - print on code char * broken, could be CDB info invalid.
+
+
+Changes Made
+======================
+
+Added a -z option. Any options after -z on sdcdb invocation line
+ are passed directly to ucSim.
+
+Fixed print basic variable command(was not parsing or expecting
+ "0x" in data coming from ucSim). Dump bit command changed from
+ "db" to "dump".
+
+Add support for the following alternative ucSim binaries:
+ -mz80 - use "uz80" simulator.
+ -mavr - use "uavr" simulator.
+ -mxa - use "uxa" simulator.
+
+ Note that Z80(and probably avr/xa) does not produce enough
+ CDB debugging information to
+ make SDCDB useful. Hopefully CDB support will be
+ added to these other linkers and code generators.
+
+Added lf,lm,ls commands(list functions, list modules, list symbols).
+ This allows browsing some the CDB information SDCDB pulls in
+ to do the wonderful things it does.
+
+Added '.' prefix/command, used alone switches back and forth
+ from ucSim/SDCDB command mode). Also when at the (ucsim) prompt,
+ if a command is prefixed with '.' it will route the command to
+ the SDCDB command processor. (This could obsolete the '!' prefix).
+
+
+======================
+
+Fix any remaining shortcomings above and make sdcdb integrate better with
+ucSim.
+
+Concerning the hanging on next/step instructions: This is critical
+to fix. I beleive the problem is related to SDCDB's attempt to
+dynamically track context. To do this, it sets many temporary break
+points and uses these to progress step by step through the source code.
+It does not seem reliable. It might be an idea to offer a simplified
+mode of stepping and breakpoints. Need to study this more.
+
+Make SDCDB integrate better with ucSim.
+I think if sdcdb can act more transparently in regard to ucSim
+it would be used more. So stress adding value and enhancing
+ucSim operation, and not block or hide the functionality of ucSim.
+
+* combine print "p" & "pt" together. We have room on the screen,
+might as well print its type, address and value in one command.
+
+* "fr" command prints the current position in the C code.
+Should also print the raw code address for dumping ucSim code.
+
+
+
+Developer Notes:
+======================
+To debug, it might be helpful to turn on verbose debug dumps
+by uncommenting #define SDCDB_DEBUG in sdcdb.h.
+
+Some basic layout:
+sdcdb.c - main shell of the program.
+cmd.c - process user commands typed in.
+simi.c - handle talking to the simulator via a socket connection.
+symtab.c - Misc. functions to translate and process linked list
+ structures(modules, functions, symbols, etc) and CDB file
+ parsing.
+break.c - track and implement break points.
+
+Understanding the structures and access mechanisms of SDCDB
+is a bit of work. The structures include generic linked list
+and function access. These lists are accessed in part by the
+functions from ../../src/SDCCset.c and SDCChash.c. See the
+cmd.c:infoSymbols() routine to gain some insight into these
+main program structures. Or type "info symbols" to dump
+out some of these. The new ls,lm,lf commands are also based
+on showing information about these lists of structures.
+
+Generic functions are used to act on these linked lists of
+structures. For example, in cmd.c, DEFSETFUNC(funcWithName)
+function will find a function structure with a given name.
+So the linked list of function structures(with the head
+"functions") is traversed and when one is found with a matching
+name, a pointer to the function structure is returned.
+
+The src/SDCCset.c,SDCCset.h contain much of the core helper
+routines to allowed to implement these linked list access
+functions.
+
+The dynamic context tracking is difficult to understand.
+It has some concept of stack use, as in
+cmd.c:printSymValue(), where it can print variables relative
+to the stack pointer.
+
projects / fw / sdcc / blobdiff