- target_resume is now synchronous with 5sec timeout

[fw/openocd] / configure.in

diff --git a/configure.in b/configure.in
index 92107fa78ef6a65c445c10ca834c1185b015cf3a..343b52c624790ad9859b316ac95ba3805ea35706 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -1,13 +1,18 @@
 AC_PREREQ(2.59)
 AC_INIT(configure.in)
 
-AC_SEARCH_LIBS([ioperm], [ioperm])
-
 AC_CANONICAL_HOST
 
+AC_SEARCH_LIBS([ioperm], [ioperm])
+AC_SEARCH_LIBS([dlopen], [dl])
+
 AC_CHECK_HEADERS(jtag_minidriver.h)
 AC_CHECK_HEADERS(sys/param.h)
+AC_CHECK_HEADERS(sys/time.h)
 AC_CHECK_HEADERS(elf.h)
+AC_CHECK_HEADERS(strings.h)
+
+AC_HEADER_TIME
 
 AC_C_BIGENDIAN
 
@@ -26,6 +31,10 @@ AC_ARG_ENABLE(parport,
   AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]), 
   [build_parport=$enableval], [build_parport=no])
 
+AC_ARG_ENABLE(dummy,
+  AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]), 
+  [build_dummy=$enableval], [build_dummy=no])
+  
 case "${host_cpu}" in 
   i?86|x86*)
     AC_ARG_ENABLE(parport_ppdev,
@@ -55,9 +64,9 @@ case "${host_cpu}" in
       AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]), 
       [build_ep93xx=$enableval], [build_ep93xx=no])
 
-AC_ARG_ENABLE(ecosboard,
-  AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCosBoard based JTAG debugger]), 
-  [build_ecosboard=$enableval], [build_ecosboard=no])
+       AC_ARG_ENABLE(ecosboard,
+         AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCosBoard based JTAG debugger]), 
+         [build_ecosboard=$enableval], [build_ecosboard=no])
 
     AC_ARG_ENABLE(at91rm9200,
       AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
@@ -67,6 +76,7 @@ AC_ARG_ENABLE(ecosboard,
   *) 
     build_ep93xx=no
     build_at91rm9200=no
+       build_ecosboard=no
     ;;
 esac
 
@@ -90,6 +100,10 @@ AC_ARG_ENABLE(oocd_trace,
   AS_HELP_STRING([--enable-oocd_trace], [Enable building support for the OpenOCD+trace ETM capture device]),
   [build_oocd_trace=$enableval], [build_oocd_trace=no])
 
+AC_ARG_ENABLE(jlink,
+  AS_HELP_STRING([--enable-jlink], [Enable building support for the Segger J-Link JTAG Programmer]),
+  [build_jlink=$enableval], [build_jlink=no])
+
 AC_ARG_WITH(ftd2xx,
         [AS_HELP_STRING(--with-ftd2xx,
            [Where libftd2xx can be found <default=search>])],
@@ -139,6 +153,14 @@ else
   AC_DEFINE(BUILD_PARPORT, 0, [0 if you don't want parport.])
 fi
 
+if test $build_dummy = yes; then
+  build_bitbang=yes
+  AC_DEFINE(BUILD_DUMMY, 1, [1 if you want dummy driver.])
+else
+  AC_DEFINE(BUILD_DUMMY, 0, [0 if you don't want dummy driver.])
+fi
+
+
 if test $build_ep93xx = yes; then
   build_bitbang=yes
   AC_DEFINE(BUILD_EP93XX, 1, [1 if you want ep93xx.])
@@ -234,10 +256,17 @@ else
   AC_DEFINE(BUILD_OOCD_TRACE, 0, [0 if you don't want the OpenOCD+trace ETM capture driver.])
 fi
 
+if test $build_jlink = yes; then
+  AC_DEFINE(BUILD_JLINK, 1, [1 if you want the J-Link JTAG driver.])
+else
+  AC_DEFINE(BUILD_JLINK, 0, [0 if you don't want the J-Link JTAG driver.])
+fi
+
 AM_CONFIG_HEADER(config.h)
 AM_INIT_AUTOMAKE(openocd, 1.0)
 
 AM_CONDITIONAL(PARPORT, test $build_parport = yes)
+AM_CONDITIONAL(DUMMY, test $build_dummy = yes)
 AM_CONDITIONAL(GIVEIO, test $parport_use_giveio = yes)
 AM_CONDITIONAL(EP93XX, test $build_ep93xx = yes)
 AM_CONDITIONAL(ECOSBOARD, test $build_ecosboard = yes)
@@ -251,6 +280,7 @@ AM_CONDITIONAL(PRESTO_LIBFTDI, test $build_presto_libftdi = yes)
 AM_CONDITIONAL(PRESTO_FTD2XX, test $build_presto_ftd2xx = yes)
 AM_CONDITIONAL(USBPROG, test $build_usbprog = yes)
 AM_CONDITIONAL(OOCD_TRACE, test $build_oocd_trace = yes)
+AM_CONDITIONAL(JLINK, test $build_jlink = yes)
 AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
 AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
 AM_CONDITIONAL(IS_WIN32, test $is_win32 = yes)