jtag: drivers: xlnx-pcie-xvc: Add support for Xilinx XVC/PCIe

[fw/openocd] / configure.ac

diff --git a/configure.ac b/configure.ac
index 562ec5a7cc47a1cc4bafcf5f48992bd483368943..e86d33f88a7b02162e4bf906b0ee97ff4eaf0678 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -110,11 +110,13 @@ m4_define([ADAPTER_OPT], [m4_translit(ADAPTER_ARG($1), [_], [-])])
 
 m4_define([USB1_ADAPTERS],
        [[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]],
-       [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]],
+       [[stlink], [ST-Link Programmer], [HLADAPTER_STLINK]],
        [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
        [[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
        [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
-       [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
+       [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
+       [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
+       [[xds110], [TI XDS110 Debug Probe], [XDS110]]])
 
 m4_define([USB_ADAPTERS],
        [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
@@ -140,6 +142,9 @@ m4_define([LIBFTDI_ADAPTERS],
 m4_define([LIBJAYLINK_ADAPTERS],
        [[[jlink], [SEGGER J-Link Programmer], [JLINK]]])
 
+m4_define([PCIE_ADAPTERS],
+       [[[xlnx_pcie_xvc], [Xilinx XVC/PCIe], [XLNX_PCIE_XVC]]])
+
 
 AC_ARG_ENABLE([doxygen-html],
   AS_HELP_STRING([--disable-doxygen-html],
@@ -170,7 +175,6 @@ AC_ARG_ENABLE([werror],
   [gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
 
 # set default verbose options, overridden by following options
-debug_jtag_io=no
 debug_usb_io=no
 debug_usb_comms=no
 
@@ -178,16 +182,10 @@ AC_ARG_ENABLE([verbose],
   AS_HELP_STRING([--enable-verbose],
       [Enable verbose JTAG I/O messages (for debugging).]),
   [
-  debug_jtag_io=$enableval
   debug_usb_io=$enableval
   debug_usb_comms=$enableval
   ], [])
 
-AC_ARG_ENABLE([verbose_jtag_io],
-  AS_HELP_STRING([--enable-verbose-jtag-io],
-      [Enable verbose JTAG I/O messages (for debugging).]),
-  [debug_jtag_io=$enableval], [])
-
 AC_ARG_ENABLE([verbose_usb_io],
   AS_HELP_STRING([--enable-verbose-usb-io],
       [Enable verbose USB I/O messages (for debugging)]),
@@ -198,12 +196,6 @@ AC_ARG_ENABLE([verbose_usb_comms],
       [Enable verbose USB communication messages (for debugging)]),
   [debug_usb_comms=$enableval], [])
 
-AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT([$debug_jtag_io])
-AS_IF([test "x$debug_jtag_io" = "xyes"], [
-  AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
-])
-
 AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
 AC_MSG_RESULT([$debug_usb_io])
 AS_IF([test "x$debug_usb_io" = "xyes"], [
@@ -326,12 +318,20 @@ AC_ARG_ENABLE([sysfsgpio],
   AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
   [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
 
+AC_ARG_ENABLE([xlnx_pcie_xvc],
+  AS_HELP_STRING([--enable-xlnx-pcie-xvc], [Enable building support for Xilinx XVC/PCIe.]),
+  [build_xlnx_pcie_xvc=$enableval], [build_xlnx_pcie_xvc=no])
+
 AS_CASE([$host_os],
   [linux*], [],
   [
     AS_IF([test "x$build_sysfsgpio" = "xyes"], [
       AC_MSG_ERROR([sysfsgpio is only available on linux])
     ])
+
+    AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+      AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux])
+    ])
 ])
 
 AC_ARG_ENABLE([minidriver_dummy],
@@ -591,6 +591,13 @@ AS_IF([test "x$build_sysfsgpio" = "xyes"], [
   AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
 ])
 
+AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+  build_xlnx_pcie_xvc=yes
+  AC_DEFINE([BUILD_XLNX_PCIE_XVC], [1], [1 if you want the Xilinx XVC/PCIe driver.])
+], [
+  AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.])
+])
+
 AS_IF([test "x$build_target64" = "xyes"], [
   AC_DEFINE([BUILD_TARGET64], [1], [1 if you want 64-bit addresses.])
 ], [
@@ -633,6 +640,9 @@ PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
 
 m4_define([PROCESS_ADAPTERS], [
   m4_foreach([adapter], [$1], [
+       AS_IF([test "x$build_zy1000" = "xyes"], [
+               ADAPTER_VAR([adapter])=no
+       ])
        AS_IF([test $2], [
                AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [
                        AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
@@ -655,7 +665,7 @@ PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
 PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
 PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
-PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.1])
+PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2])
 
 AS_IF([test "x$build_openjtag" = "xyes"], [
   AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [
@@ -707,6 +717,7 @@ AM_CONDITIONAL([OOCD_TRACE], [test "x$build_oocd_trace" = "xyes"])
 AM_CONDITIONAL([REMOTE_BITBANG], [test "x$build_remote_bitbang" = "xyes"])
 AM_CONDITIONAL([BUSPIRATE], [test "x$build_buspirate" = "xyes"])
 AM_CONDITIONAL([SYSFSGPIO], [test "x$build_sysfsgpio" = "xyes"])
+AM_CONDITIONAL([XLNX_PCIE_XVC], [test "x$build_xlnx_pcie_xvc" = "xyes"])
 AM_CONDITIONAL([USE_LIBUSB0], [test "x$use_libusb0" = "xyes"])
 AM_CONDITIONAL([USE_LIBUSB1], [test "x$use_libusb1" = "xyes"])
 AM_CONDITIONAL([IS_CYGWIN], [test "x$is_cygwin" = "xyes"])
@@ -770,7 +781,7 @@ AS_IF([test "x${gcc_werror}" = "xyes"], [
   GCC_WARNINGS="${GCC_WARNINGS} -Werror"
 ])
 
-# overide default gcc cflags
+# override default gcc cflags
 AS_IF([test "x$gcc_warnings" = "xyes"], [
   AC_SUBST([GCC_WARNINGS], [$GCC_WARNINGS])
 ])
@@ -786,7 +797,7 @@ echo OpenOCD configuration summary
 echo --------------------------------------------------
 m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
        HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
-       LIBJAYLINK_ADAPTERS],
+       LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
        [s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
        AS_CASE([$ADAPTER_VAR([adapter])],
                [auto], [