m4_define([USB1_ADAPTERS],
[[[ftdi], [MPSSE mode of FTDI based devices], [FTDI]],
- [[stlink], [ST-Link JTAG Programmer], [HLADAPTER_STLINK]],
+ [[stlink], [ST-Link Programmer], [HLADAPTER_STLINK]],
[[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
[[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
[[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
- [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
-
-m4_define([USB_ADAPTERS],
- [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
+ [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
+ [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
+ [[xds110], [TI XDS110 Debug Probe], [XDS110]],
+ [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
[[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
[[aice], [Andes JTAG Programmer], [AICE]]])
m4_define([LIBJAYLINK_ADAPTERS],
[[[jlink], [SEGGER J-Link Programmer], [JLINK]]])
+m4_define([PCIE_ADAPTERS],
+ [[[xlnx_pcie_xvc], [Xilinx XVC/PCIe], [XLNX_PCIE_XVC]]])
+
AC_ARG_ENABLE([doxygen-html],
AS_HELP_STRING([--disable-doxygen-html],
[gcc_werror=$enableval], [gcc_werror=$gcc_warnings])
# set default verbose options, overridden by following options
-debug_jtag_io=no
debug_usb_io=no
debug_usb_comms=no
AS_HELP_STRING([--enable-verbose],
[Enable verbose JTAG I/O messages (for debugging).]),
[
- debug_jtag_io=$enableval
debug_usb_io=$enableval
debug_usb_comms=$enableval
], [])
-AC_ARG_ENABLE([verbose_jtag_io],
- AS_HELP_STRING([--enable-verbose-jtag-io],
- [Enable verbose JTAG I/O messages (for debugging).]),
- [debug_jtag_io=$enableval], [])
-
AC_ARG_ENABLE([verbose_usb_io],
AS_HELP_STRING([--enable-verbose-usb-io],
[Enable verbose USB I/O messages (for debugging)]),
[Enable verbose USB communication messages (for debugging)]),
[debug_usb_comms=$enableval], [])
-AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
-AC_MSG_RESULT([$debug_jtag_io])
-AS_IF([test "x$debug_jtag_io" = "xyes"], [
- AC_DEFINE([_DEBUG_JTAG_IO_],[1], [Print verbose JTAG I/O messages])
-])
-
AC_MSG_CHECKING([whether to enable verbose USB I/O messages]);
AC_MSG_RESULT([$debug_usb_io])
AS_IF([test "x$debug_usb_io" = "xyes"], [
AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
[build_dummy=$enableval], [build_dummy=no])
+AC_ARG_ENABLE([rshim],
+ AS_HELP_STRING([--enable-rshim], [Enable building the rshim driver]),
+ [build_rshim=$enableval], [build_rshim=no])
+
m4_define([AC_ARG_ADAPTERS], [
m4_foreach([adapter], [$1],
[AC_ARG_ENABLE(ADAPTER_OPT([adapter]),
AC_ARG_ADAPTERS([
USB1_ADAPTERS,
- USB_ADAPTERS,
USB0_ADAPTERS,
HIDAPI_ADAPTERS,
HIDAPI_USB1_ADAPTERS,
AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
[build_ioutil=$enableval], [build_ioutil=no])
+AS_CASE(["${host_cpu}"],
+ [arm*|aarch64], [
+ AC_ARG_ENABLE([bcm2835gpio],
+ AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+ [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+ AC_ARG_ENABLE([imx_gpio],
+ AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+ [build_imx_gpio=$enableval], [build_imx_gpio=no])
+ ],
+ [
+ build_bcm2835gpio=no
+ build_imx_gpio=no
+])
+
AS_CASE(["${host_cpu}"],
[arm*], [
AC_ARG_ENABLE([ep93xx],
AC_ARG_ENABLE([at91rm9200],
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
-
- AC_ARG_ENABLE([bcm2835gpio],
- AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
- [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
- AC_ARG_ENABLE([imx_gpio],
- AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
- [build_imx_gpio=$enableval], [build_imx_gpio=no])
],
[
build_ep93xx=no
build_at91rm9200=no
- build_bcm2835gpio=no
- build_imx_gpio=no
])
AC_ARG_ENABLE([gw16012],
AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
[build_sysfsgpio=$enableval], [build_sysfsgpio=no])
+AC_ARG_ENABLE([xlnx_pcie_xvc],
+ AS_HELP_STRING([--enable-xlnx-pcie-xvc], [Enable building support for Xilinx XVC/PCIe.]),
+ [build_xlnx_pcie_xvc=$enableval], [build_xlnx_pcie_xvc=no])
+
AS_CASE([$host_os],
[linux*], [],
[
AS_IF([test "x$build_sysfsgpio" = "xyes"], [
AC_MSG_ERROR([sysfsgpio is only available on linux])
])
+
+ AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+ AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux])
+ ])
+
+ AS_CASE([$host_os], [freebsd*], [],
+ [
+ AS_IF([test "x$build_rshim" = "xyes"], [
+ AC_MSG_ERROR([build_rshim is only available on linux or freebsd])
+ ])
+ ])
])
AC_ARG_ENABLE([minidriver_dummy],
[Disable building internal libjaylink]),
[use_internal_libjaylink=$enableval], [use_internal_libjaylink=yes])
-AC_ARG_ENABLE([target64],
- AS_HELP_STRING([--disable-target64], [Disable 64-bit target address]),
- [build_target64=$enableval], [build_target64=yes])
-
build_minidriver=no
AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
AS_IF([test "x$build_zy1000" = "xyes"], [
AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
])
+AS_IF([test "x$build_rshim" = "xyes"], [
+ AC_DEFINE([BUILD_RSHIM], [1], [1 if you want to debug BlueField SoC via rshim.])
+], [
+ AC_DEFINE([BUILD_RSHIM], [0], [0 if you don't want to debug BlueField SoC via rshim.])
+])
+
AS_IF([test "x$build_dummy" = "xyes"], [
build_bitbang=yes
AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
AS_IF([test "x$use_internal_jimtcl" = "xyes"], [
AS_IF([test -f "$srcdir/jimtcl/configure.ac"], [
- AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim --with-ext="eventloop array clock regexp stdlib tclcompat" --without-ext="default"])
+ AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
], [
AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
])
AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
])
-AS_IF([test "x$build_target64" = "xyes"], [
- AC_DEFINE([BUILD_TARGET64], [1], [1 if you want 64-bit addresses.])
+AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
+ build_xlnx_pcie_xvc=yes
+ AC_DEFINE([BUILD_XLNX_PCIE_XVC], [1], [1 if you want the Xilinx XVC/PCIe driver.])
], [
- AC_DEFINE([BUILD_TARGET64], [0], [0 if you don't want 64-bit addresses.])
+ AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.])
])
-
PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
use_libusb1=yes
AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
])
-PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.1],
+PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
[use_libjaylink=yes], [use_libjaylink=no])
m4_define([PROCESS_ADAPTERS], [
m4_foreach([adapter], [$1], [
+ AS_IF([test "x$build_zy1000" = "xyes"], [
+ ADAPTER_VAR([adapter])=no
+ ])
AS_IF([test $2], [
AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [
AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
])
PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
-PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_libusb1" = "xyes" -a "x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libusb-1.x or libjaylink-0.1])
+PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2])
AS_IF([test "x$build_openjtag" = "xyes"], [
AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [
AM_CONDITIONAL([REMOTE_BITBANG], [test "x$build_remote_bitbang" = "xyes"])
AM_CONDITIONAL([BUSPIRATE], [test "x$build_buspirate" = "xyes"])
AM_CONDITIONAL([SYSFSGPIO], [test "x$build_sysfsgpio" = "xyes"])
+AM_CONDITIONAL([XLNX_PCIE_XVC], [test "x$build_xlnx_pcie_xvc" = "xyes"])
AM_CONDITIONAL([USE_LIBUSB0], [test "x$use_libusb0" = "xyes"])
AM_CONDITIONAL([USE_LIBUSB1], [test "x$use_libusb1" = "xyes"])
AM_CONDITIONAL([IS_CYGWIN], [test "x$is_cygwin" = "xyes"])
AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
-AM_CONDITIONAL([TARGET64], [test "x$build_target64" = "xyes"])
+AM_CONDITIONAL([RSHIM], [test "x$build_rshim" = "xyes"])
AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
GCC_WARNINGS="${GCC_WARNINGS} -Werror"
])
-# overide default gcc cflags
+# override default gcc cflags
AS_IF([test "x$gcc_warnings" = "xyes"], [
AC_SUBST([GCC_WARNINGS], [$GCC_WARNINGS])
])
echo
echo OpenOCD configuration summary
echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
+m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS,
HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
- LIBJAYLINK_ADAPTERS],
+ LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
[s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
AS_CASE([$ADAPTER_VAR([adapter])],
[auto], [
projects / fw / openocd / blobdiff