ftdi: Report an error if no ftdi_vid_pid is specified

[fw/openocd] / configure.ac

diff --git a/configure.ac b/configure.ac
index e86d33f88a7b02162e4bf906b0ee97ff4eaf0678..a6bda8856cdf3f5b4b6d79b33855358fcab0769d 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -116,10 +116,8 @@ m4_define([USB1_ADAPTERS],
        [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
        [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
        [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
-       [[xds110], [TI XDS110 Debug Probe], [XDS110]]])
-
-m4_define([USB_ADAPTERS],
-       [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
+       [[xds110], [TI XDS110 Debug Probe], [XDS110]],
+       [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
        [[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
        [[aice], [Andes JTAG Programmer], [AICE]]])
 
@@ -224,6 +222,10 @@ AC_ARG_ENABLE([dummy],
   AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
   [build_dummy=$enableval], [build_dummy=no])
 
+AC_ARG_ENABLE([rshim],
+  AS_HELP_STRING([--enable-rshim], [Enable building the rshim driver]),
+  [build_rshim=$enableval], [build_rshim=no])
+
 m4_define([AC_ARG_ADAPTERS], [
   m4_foreach([adapter], [$1],
        [AC_ARG_ENABLE(ADAPTER_OPT([adapter]),
@@ -235,7 +237,6 @@ m4_define([AC_ARG_ADAPTERS], [
 
 AC_ARG_ADAPTERS([
   USB1_ADAPTERS,
-  USB_ADAPTERS,
   USB0_ADAPTERS,
   HIDAPI_ADAPTERS,
   HIDAPI_USB1_ADAPTERS,
@@ -277,6 +278,20 @@ AC_ARG_ENABLE([ioutil],
   AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
   [build_ioutil=$enableval], [build_ioutil=no])
 
+AS_CASE(["${host_cpu}"],
+  [arm*|aarch64], [
+    AC_ARG_ENABLE([bcm2835gpio],
+      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+    AC_ARG_ENABLE([imx_gpio],
+      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+      [build_imx_gpio=$enableval], [build_imx_gpio=no])
+  ],
+  [
+    build_bcm2835gpio=no
+    build_imx_gpio=no
+])
+
 AS_CASE(["${host_cpu}"],
   [arm*], [
     AC_ARG_ENABLE([ep93xx],
@@ -286,19 +301,10 @@ AS_CASE(["${host_cpu}"],
     AC_ARG_ENABLE([at91rm9200],
       AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
       [build_at91rm9200=$enableval], [build_at91rm9200=no])
-
-    AC_ARG_ENABLE([bcm2835gpio],
-      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
-      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
-    AC_ARG_ENABLE([imx_gpio],
-      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
-      [build_imx_gpio=$enableval], [build_imx_gpio=no])
   ],
   [
     build_ep93xx=no
     build_at91rm9200=no
-    build_bcm2835gpio=no
-    build_imx_gpio=no
 ])
 
 AC_ARG_ENABLE([gw16012],
@@ -332,6 +338,13 @@ AS_CASE([$host_os],
     AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
       AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux])
     ])
+
+    AS_CASE([$host_os], [freebsd*], [],
+    [
+      AS_IF([test "x$build_rshim" = "xyes"], [
+        AC_MSG_ERROR([build_rshim is only available on linux or freebsd])
+      ])
+    ])
 ])
 
 AC_ARG_ENABLE([minidriver_dummy],
@@ -347,10 +360,6 @@ AC_ARG_ENABLE([internal-libjaylink],
   [Disable building internal libjaylink]),
   [use_internal_libjaylink=$enableval], [use_internal_libjaylink=yes])
 
-AC_ARG_ENABLE([target64],
-  AS_HELP_STRING([--disable-target64], [Disable 64-bit target address]),
-    [build_target64=$enableval], [build_target64=yes])
-
 build_minidriver=no
 AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
 AS_IF([test "x$build_zy1000" = "xyes"], [
@@ -480,6 +489,12 @@ AS_IF([test "x$build_parport" = "xyes"], [
   AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
 ])
 
+AS_IF([test "x$build_rshim" = "xyes"], [
+  AC_DEFINE([BUILD_RSHIM], [1], [1 if you want to debug BlueField SoC via rshim.])
+], [
+  AC_DEFINE([BUILD_RSHIM], [0], [0 if you don't want to debug BlueField SoC via rshim.])
+])
+
 AS_IF([test "x$build_dummy" = "xyes"], [
   build_bitbang=yes
   AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
@@ -598,13 +613,6 @@ AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
   AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.])
 ])
 
-AS_IF([test "x$build_target64" = "xyes"], [
-  AC_DEFINE([BUILD_TARGET64], [1], [1 if you want 64-bit addresses.])
-], [
-  AC_DEFINE([BUILD_TARGET64], [0], [0 if you don't want 64-bit addresses.])
-])
-
-
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
        use_libusb1=yes
        AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
@@ -660,7 +668,6 @@ m4_define([PROCESS_ADAPTERS], [
 ])
 
 PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
 PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
 PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
@@ -728,7 +735,7 @@ AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"])
 AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
 AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
 AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
-AM_CONDITIONAL([TARGET64], [test "x$build_target64" = "xyes"])
+AM_CONDITIONAL([RSHIM], [test "x$build_rshim" = "xyes"])
 
 AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
@@ -795,7 +802,7 @@ echo
 echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
+m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS,
        HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
        LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
        [s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))