AM_CONFIG_HEADER([config.h])
AH_BOTTOM([
#include <helper/system.h>
+#include <helper/types.h>
#include <helper/replacements.h>
])
AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
[build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
-AC_ARG_ENABLE([ecosboard],
- AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
- [build_ecosboard=$enableval], [build_ecosboard=no])
-
AC_ARG_ENABLE([zy1000_master],
AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
[build_zy1000_master=$enableval], [build_zy1000_master=no])
AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
[build_osbdm=$enableval], [build_osbdm=no])
+AC_ARG_ENABLE([opendous],
+ AS_HELP_STRING([--enable-opendous], [Enable building support for the estick/opendous JTAG Programmer]),
+ [build_opendous=$enableval], [build_opendous=no])
+
AC_ARG_ENABLE([minidriver_dummy],
AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
[build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.])
fi
-if test $build_ecosboard = yes; then
- AC_DEFINE([BUILD_ECOSBOARD], [1], [1 if you want eCosBoard.])
-else
- AC_DEFINE([BUILD_ECOSBOARD], [0], [0 if you don't want eCosBoard.])
-fi
-
if test $build_zy1000 = yes; then
AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.])
else
fi
if test $build_stlink = yes; then
- AC_DEFINE(BUILD_STLINK, 1, [1 if you want the ST-Link JTAG driver.])
+ AC_DEFINE([BUILD_STLINK], [1], [1 if you want the ST-Link JTAG driver.])
else
- AC_DEFINE(BUILD_STLINK, 0, [0 if you don't want the ST-Link JTAG driver.])
+ AC_DEFINE([BUILD_STLINK], [0], [0 if you don't want the ST-Link JTAG driver.])
fi
if test $build_osbdm = yes; then
- AC_DEFINE(BUILD_OSBDM, 1, [1 if you want the OSBDM driver.])
+ AC_DEFINE([BUILD_OSBDM], [1], [1 if you want the OSBDM driver.])
else
- AC_DEFINE(BUILD_OSBDM, 0, [0 if you don't want the OSBDM driver.])
+ AC_DEFINE([BUILD_OSBDM], [0], [0 if you don't want the OSBDM driver.])
+fi
+
+if test $build_opendous = yes; then
+ AC_DEFINE([BUILD_OPENDOUS], [1], [1 if you want the estick/opendous JTAG driver.])
+else
+ AC_DEFINE([BUILD_OPENDOUS], [0], [0 if you don't want the estick/opendous JTAG driver.])
fi
if test "$use_internal_jimtcl" = yes; then
# Check for libusb1 ported drivers.
build_usb_ng=no
-if test $build_jlink = yes -o $build_stlink = yes -o $build_osbdm = yes; then
+if test $build_jlink = yes -o $build_stlink = yes -o $build_osbdm = yes -o \
+ $build_opendous = yes
+then
build_usb_ng=yes
fi
AM_CONDITIONAL([DUMMY], [test $build_dummy = yes])
AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes])
AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes])
-AM_CONDITIONAL([ECOSBOARD], [test $build_ecosboard = yes])
AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
AM_CONDITIONAL([STLINK], [test $build_stlink = yes])
AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
+AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
AM_CONDITIONAL([USB], [test $build_usb = yes])
AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes])
AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])