[[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
[[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
[[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
- [[xds110], [TI XDS110 Debug Probe], [XDS110]]])
-
-m4_define([USB_ADAPTERS],
- [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
+ [[xds110], [TI XDS110 Debug Probe], [XDS110]],
+ [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
[[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
[[aice], [Andes JTAG Programmer], [AICE]]])
AC_ARG_ADAPTERS([
USB1_ADAPTERS,
- USB_ADAPTERS,
USB0_ADAPTERS,
HIDAPI_ADAPTERS,
HIDAPI_USB1_ADAPTERS,
AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
[build_ioutil=$enableval], [build_ioutil=no])
+AS_CASE(["${host_cpu}"],
+ [arm*|aarch64], [
+ AC_ARG_ENABLE([bcm2835gpio],
+ AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+ [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+ AC_ARG_ENABLE([imx_gpio],
+ AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+ [build_imx_gpio=$enableval], [build_imx_gpio=no])
+ ],
+ [
+ build_bcm2835gpio=no
+ build_imx_gpio=no
+])
+
AS_CASE(["${host_cpu}"],
[arm*], [
AC_ARG_ENABLE([ep93xx],
AC_ARG_ENABLE([at91rm9200],
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
-
- AC_ARG_ENABLE([bcm2835gpio],
- AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
- [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
- AC_ARG_ENABLE([imx_gpio],
- AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
- [build_imx_gpio=$enableval], [build_imx_gpio=no])
],
[
build_ep93xx=no
build_at91rm9200=no
- build_bcm2835gpio=no
- build_imx_gpio=no
])
AC_ARG_ENABLE([gw16012],
])
PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
echo
echo OpenOCD configuration summary
echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
+m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS,
HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
[s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))