AC_PREREQ(2.60)
-AC_INIT([openocd], [0.6.0-rc2-dev],
+AC_INIT([openocd], [0.8.0-dev],
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
AC_CONFIG_SRCDIR([src/openocd.c])
m4_include([config_subdir.m4])dnl
AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip])
-AM_MAINTAINER_MODE
-AM_CONFIG_HEADER([config.h])
+AC_CONFIG_HEADERS([config.h])
AH_BOTTOM([
#include <helper/system.h>
#include <helper/types.h>
# In case (1) and (2) we need to know where the package was unpacked.
AC_ARG_WITH(ftd2xx-win32-zipdir,
- AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked <default=search>]),
+ AS_HELP_STRING([--with-ftd2xx-win32-zipdir],[Where (CYGWIN/MINGW) the zip file from ftdichip.com was unpacked (default=search)]),
[
# option present
if test -d $with_ftd2xx_win32_zipdir
], [true])
AC_ARG_WITH(ftd2xx-linux-tardir,
- AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked <default=search>]),
+ AS_HELP_STRING([--with-ftd2xx-linux-tardir], [Where (Linux/Unix) the tar file from ftdichip.com was unpacked (default=search)]),
[
# Option present
if test $is_win32 = yes ; then
AC_ARG_WITH(ftd2xx-lib,
AS_HELP_STRING([--with-ftd2xx-lib],
- [Use static or shared ftd2xx libs on default static]),
+ [Use static or shared ftd2xx libs (default=static)]),
[
case "$withval" in
static)
AC_ARG_ENABLE([at91rm9200],
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
+
+ AC_ARG_ENABLE([bcm2835gpio],
+ AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+ [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
;;
*)
build_ep93xx=no
build_at91rm9200=no
+ build_bcm2835gpio=no
;;
esac
AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
[build_usbprog=$enableval], [build_usbprog=no])
+AC_ARG_ENABLE([openjtag_ftd2xx],
+ AS_HELP_STRING([--enable-openjtag_ftd2xx], [Enable building support for the OpenJTAG Programmer with ftd2xx driver]),
+ [build_openjtag_ftd2xx=$enableval], [build_openjtag_ftd2xx=no])
+
+AC_ARG_ENABLE([openjtag_ftdi],
+ AS_HELP_STRING([--enable-openjtag_ftdi], [Enable building support for the OpenJTAG Programmer with ftdi driver]),
+ [build_openjtag_ftdi=$enableval], [build_openjtag_ftdi=no])
+
AC_ARG_ENABLE([oocd_trace],
AS_HELP_STRING([--enable-oocd_trace],
[Enable building support for some prototype OpenOCD+trace ETM capture hardware]),
AC_ARG_ENABLE([stlink],
AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]),
- [build_stlink=$enableval], [build_stlink=no])
+ [build_hladapter_stlink=$enableval], [build_hladapter_stlink=no])
+
+AC_ARG_ENABLE([ti-icdi],
+ AS_HELP_STRING([--enable-ti-icdi], [Enable building support for the TI ICDI JTAG Programmer]),
+ [build_hladapter_icdi=$enableval], [build_hladapter_icdi=no])
AC_ARG_ENABLE([osbdm],
AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
AS_HELP_STRING([--enable-opendous], [Enable building support for the estick/opendous JTAG Programmer]),
[build_opendous=$enableval], [build_opendous=no])
+AC_ARG_ENABLE([sysfsgpio],
+ AS_HELP_STRING([--enable-sysfsgpio], [Enable building support for programming driven via sysfs gpios.]),
+ [build_sysfsgpio=$enableval], [build_sysfsgpio=no])
+
AC_ARG_ENABLE([minidriver_dummy],
AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
[build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
[use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
-AC_ARG_ENABLE([libusb0],
- AS_HELP_STRING([--enable-libusb0], [Use libusb-0.1 library for USB JTAG devices]),
- [check_libusb0=$enableval], [check_libusb0=no])
+AC_ARG_ENABLE([aice],
+ AS_HELP_STRING([--enable-aice], [Enable building support for the Andes JTAG Programmer]),
+ [build_aice=$enableval], [build_aice=no])
build_minidriver=no
AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.])
fi
+if test $build_bcm2835gpio = yes; then
+ build_bitbang=yes
+ AC_DEFINE([BUILD_BCM2835GPIO], [1], [1 if you want bcm2835gpio.])
+else
+ AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
+fi
+
if test x$parport_use_ppdev = xyes; then
AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
else
fi
if test $build_usb_blaster_libftdi = yes; then
- build_bitbang=yes
AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.])
else
AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [0], [0 if you don't want libftdi usb_blaster.])
fi
if test $build_usb_blaster_ftd2xx = yes; then
- build_bitbang=yes
AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [1], [1 if you want ftd2xx usb_blaster.])
else
AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [0], [0 if you don't want ftd2xx usb_blaster.])
AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.])
fi
+AC_DEFINE([BUILD_OPENJTAG], [0], [0 if you don't want the OpenJTAG driver.])
+AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [0], [0 if you don't want the OpenJTAG driver with FTD2XX driver.])
+AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [0], [0 if you don't want to build OpenJTAG driver with libftdi.])
+
+if test $build_openjtag_ftd2xx = yes; then
+ AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG driver.])
+ AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [1], [1 if you want the OpenJTAG driver with FTD2XX driver.])
+fi
+if test $build_openjtag_ftdi = yes; then
+ AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG drvier.])
+ AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [1], [1 if you want to build OpenJTAG with FTDI driver.])
+fi
+
if test $build_oocd_trace = yes; then
AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.])
else
AC_DEFINE([BUILD_JLINK], [0], [0 if you don't want the J-Link JTAG driver.])
fi
+if test $build_aice = yes; then
+ AC_DEFINE([BUILD_AICE], [1], [1 if you want the AICE JTAG driver.])
+else
+ AC_DEFINE([BUILD_AICE], [0], [0 if you don't want the AICE JTAG driver.])
+fi
+
if test $build_vsllink = yes; then
AC_DEFINE([BUILD_VSLLINK], [1], [1 if you want the Versaloon-Link JTAG driver.])
else
AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
fi
-if test $build_stlink = yes; then
- AC_DEFINE([BUILD_STLINK], [1], [1 if you want the ST-Link JTAG driver.])
+if test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes; then
+ AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
else
- AC_DEFINE([BUILD_STLINK], [0], [0 if you don't want the ST-Link JTAG driver.])
+ AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the High Level JTAG driver.])
fi
if test $build_osbdm = yes; then
AC_DEFINE([BUILD_REMOTE_BITBANG], [0], [0 if you don't want the Remote Bitbang JTAG driver.])
fi
+if test $build_sysfsgpio = yes; then
+ build_bitbang=yes
+ AC_DEFINE([BUILD_SYSFSGPIO], [1], [1 if you want the SysfsGPIO driver.])
+else
+ AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
+fi
#-- Deal with MingW/Cygwin FTD2XX issues
if test $is_win32 = yes; then
AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
AC_MSG_CHECKING([for ftd2xx.lib exists (win32)])
# if we are given a zipdir...
AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
AC_MSG_CHECKING([for libftd2xx.a (darwin)])
if test ! -f /usr/local/include/ftd2xx.h ; then
AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
# Must be linux
if test $host_os != linux-gnu && test $host_os != linux ; then
AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
fi
fi
LDFLAGS="${LDFLAGS} ${FTD2XX_LDFLAGS}"
- LIBS="${LIBS} ${FTD2XX_LIB}"
+ LIBS="${FTD2XX_LIB} ${LIBS}"
AC_MSG_RESULT([${FTD2XX_LDFLAGS} ${FTD2XX_LIB}])
else
AC_CHECK_HEADER([ftd2xx.h],[],[
fi
fi # linux
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
# Before we go any further - make sure we can *BUILD* and *RUN*
# a simple app with the "ftd2xx.lib" file - in what ever form we where given
CFLAGS=$CFLAGS_SAVE
fi
-if test $build_ft2232_libftdi = yes ; then
+if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
+ $build_openjtag_ftdi = yes; then
# We assume: the package is preinstalled in the proper place
# these present as 2 libraries..
LIBS="$LIBS -lftdi -lusb"
], [
AC_MSG_ERROR([Cannot build & run test program using libftdi])
], [
- AC_MSG_RESULT([Skipping as we are cross-compiling])
+ AC_MSG_RESULT([Skipping as we are cross-compiling, trying build only])
+ AC_SEARCH_LIBS([ftdi_new], [], [], [AC_MSG_ERROR([Cannot link with libftdi])])
])
AC_MSG_CHECKING([for libftdi highspeed device support])
CFLAGS=$CFLAGS_SAVE
fi
-# check for usb.h when a driver will require it
-build_usb=no
+# check if some driver requires libusb-0.1
+need_usb0=no
if test $build_vsllink = yes -o $build_usbprog = yes -o \
- $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes
-then
- build_usb=yes
+ $build_rlink = yes -o $build_armjtagew = yes; then
+ need_usb0=yes
fi
-# Check for libusb1 ported drivers.
-build_usb_ng=no
-if test $build_jlink = yes -o $build_stlink = yes -o $build_osbdm = yes -o \
- $build_opendous = yes -o $build_ftdi = yes
-then
- build_usb_ng=yes
+# check if some driver can work with either libusb version
+need_usb=no
+if test $build_jlink = yes -o $build_osbdm = yes -o $build_opendous = yes -o \
+ $build_aice = yes; then
+ need_usb=yes
+fi
+
+# check if some driver requires libusb-1.x
+need_usb_ng=no
+if test $build_ftdi = yes -o $build_hladapter_icdi = yes -o \
+ $build_hladapter_stlink = yes -o $build_ulink = yes; then
+ need_usb_ng=yes
fi
# check for libusb library if necessary
-use_libusb0=no
use_libusb1=no
-if test $build_usb = yes -o $build_usb_ng = yes; then
- if test $check_libusb0 = no -a $build_usb_ng = yes; then
- AC_CHECK_HEADER([libusb-1.0/libusb.h],
- [AC_DEFINE(HAVE_LIBUSB1, 1, [Define if you have libusb-1.0]) check_libusb0=no use_libusb1=yes ],
- [ check_libusb0=yes use_libusb1=no ])
- fi
+if test $need_usb = yes -o $need_usb_ng = yes; then
+ AC_CHECK_HEADER([libusb-1.0/libusb.h], [
+ AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
+ use_libusb1=yes
+ AC_SEARCH_LIBS([libusb_error_name], [usb-1.0],
+ [AC_DEFINE([HAVE_LIBUSB_ERROR_NAME], [1], [Define if your libusb has libusb_error_name()])],
+ [AC_MSG_WARN([libusb-1.x older than 1.0.9 detected, consider updating])])
+ ], [
+ if test $need_usb_ng = yes; then
+ AC_MSG_ERROR([libusb-1.x is required for some driver(s) you've selected])
+ else
+ AC_MSG_WARN([Trying legacy libusb-0.1 as a fallback, consider installing libusb-1 instead])
+ need_usb0=yes
+ fi
+ ])
+fi
- if test $check_libusb0 = yes -o $build_usb = yes; then
- AC_CHECK_HEADERS([usb.h], [use_libusb0=yes],
- [AC_MSG_ERROR([libusb or libusb-1.0 are required to build some OpenOCD driver(s)])])
- fi
+use_libusb0=no
+if test $need_usb0 = yes; then
+ AC_CHECK_HEADERS([usb.h], [
+ use_libusb0=yes
+ ], [
+ AC_MSG_ERROR([libusb-0.1 is required to build some OpenOCD driver(s)])
+ ])
fi
AM_CONDITIONAL([RELEASE], [test $build_release = yes])
AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
+AM_CONDITIONAL([BCM2835GPIO], [test $build_bcm2835gpio = yes])
AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
AM_CONDITIONAL([FTDI_DRIVER], [test $build_ftdi = yes])
AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes])
AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes])
AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes])
+AM_CONDITIONAL([OPENJTAG], [test $build_openjtag_ftd2xx = yes -o $build_openjtag_ftdi = yes])
AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes])
AM_CONDITIONAL([JLINK], [test $build_jlink = yes])
+AM_CONDITIONAL([AICE], [test $build_aice = yes])
AM_CONDITIONAL([VSLLINK], [test $build_vsllink = yes])
AM_CONDITIONAL([RLINK], [test $build_rlink = yes])
AM_CONDITIONAL([ULINK], [test $build_ulink = yes])
AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes])
AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
-AM_CONDITIONAL([STLINK], [test $build_stlink = yes])
+AM_CONDITIONAL([HLADAPTER], [test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes])
AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
-AM_CONDITIONAL([USB], [test $build_usb = yes])
-AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes])
+AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])
AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])
AM_CONDITIONAL([USE_LIBUSB1], [test $use_libusb1 = yes])
AM_CONDITIONAL([IS_CYGWIN], [test $is_cygwin = yes])
-AM_CONDITIONAL([IS_MINGW], [test $is_mingw = ye]s)
-AM_CONDITIONAL([IS_WIN32], [test $is_win32 = ye]s)
-AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = ye]s)
+AM_CONDITIONAL([IS_MINGW], [test $is_mingw = yes])
+AM_CONDITIONAL([IS_WIN32], [test $is_win32 = yes])
+AM_CONDITIONAL([IS_DARWIN], [test $is_darwin = yes])
AM_CONDITIONAL([BITQ], [test $build_bitq = yes])
-AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = ye]s)
+AM_CONDITIONAL([MINIDRIVER], [test $build_minidriver = yes])
AM_CONDITIONAL([MINIDRIVER_DUMMY], [test $build_minidriver_dummy = yes])
AM_CONDITIONAL([INTERNAL_JIMTCL], [test $use_internal_jimtcl = yes])
src/helper/Makefile
src/jtag/Makefile
src/jtag/drivers/Makefile
- src/jtag/stlink/Makefile
+ src/jtag/drivers/usb_blaster/Makefile
+ src/jtag/hla/Makefile
+ src/jtag/aice/Makefile
src/transport/Makefile
src/xsvf/Makefile
src/svf/Makefile