Merge branch 'master' into squeeze

[debian/amanda] / changer-src / chg-mtx.sh

diff --git a/changer-src/chg-mtx.sh b/changer-src/chg-mtx.sh
deleted file mode 100644 (file)
index 72ffe89..0000000
--- a/changer-src/chg-mtx.sh
+++ /dev/null
@@ -1,243 +0,0 @@
-#!@SHELL@ 
-#
-# Exit Status:
-# 0 Alles Ok
-# 1 Illegal Request
-# 2 Fatal Error
-#
-
-# source utility functions and values from configure
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-amlibexecdir=@amlibexecdir@
-. ${amlibexecdir}/chg-lib.sh
-
-if [ -d "@AMANDA_DBGDIR@" ]; then
-       logfile=@AMANDA_DBGDIR@/changer.debug
-else
-       logfile=/dev/null
-fi
-
-myname=$0
-
-tape=`amgetconf tapedev`
-if [ -z "$tape" ]; then
-  echo "<none> tapedev not specified in amanda.conf";
-  exit 2;
-fi
-
-TAPE=`amgetconf changerdev`; export TAPE # for mtx command
-if [ -z "$TAPE" ]; then
-  echo "<none> changerdev not specified in amanda.conf";
-  exit 2;
-fi
-
-if [ "$tape" = "/dev/null" -o "$TAPE" = "/dev/null" ]; then
-  echo "<none> Both tapedev and changerdev must be specified in config file";
-  exit 2;
-fi
-
-firstslot=1
-lastslot=5
-# counted from 1 !!!
-cleanslot=6
-
-changerfile=`amgetconf changerfile`
-
-cleanfile=$changerfile-clean
-accessfile=$changerfile-access
-[ ! -f $cleanfile ] && echo 0 > $cleanfile
-[ ! -f $accessfile ] && echo 0 > $accessfile
-cleancount=`cat $cleanfile`
-accesscount=`cat $accessfile`
-#
-
-readstatus() {
-  used=`$MTX -s |
-    sed -n 's/Drive: No tape Loaded/-1/p;s/Drive: tape \(.\) loaded/\1/p'`
-
-  if [ -z "$used" ]; then
-    used="-1";
-  fi
-}
-
-
-eject() {
-  readstatus 
-  if [ $used -gt 0 ];then
-    $MTX -u $used
-    answer="0 $tape"
-    echo `_ 'Exit ->'` $answer >> $logfile
-    echo $answer
-    exit 0
-  else
-    answer=`_ '<none> %s: Drive was not loaded' "$myname"`     
-    echo `_ 'Exit ->'` $answer >> $logfile
-    echo $answer
-    exit 1
-  fi
-}
-
-reset() {
-  readstatus
-  if [ $used -gt 0 ];then
-    $MTX -u $used
-  fi
-  res=`$MTX -l 1`
-  if [ $? -eq 0 ];then
-    answer="1 $tape"
-    echo `_ 'Exit ->'` $answer >> $logfile
-    echo $answer
-    exit 0
-  else
-    answer="1 $res"
-    echo `_ 'Exit ->'` $answer >> $logfile
-    echo $answer
-    exit 1
-  fi
-}
-#
-#
-loadslot() {
-  readstatus
-  echo "     -> loaded $used" >> $logfile
-  whichslot=$1
-  case $whichslot in
-    current)
-            if [ $used -lt 0 ];then
-              $MTX -l 1
-              used=1
-            fi
-            answer="$used $tape"
-            echo `_ 'Exit ->'` $answer >> $logfile
-            echo $answer
-            exit 0
-            ;;
-    next|advance)
-         load=`expr $used + 1`
-         [ $load -gt $lastslot ] && load=$firstslot
-         ;;
-    prev)
-         load=`expr $used - 1`
-         [ $load -lt $firstslot ] && load=$lastslot
-         ;;
-    first)
-         load=$firstslot
-         ;;
-    last)
-         load=$lastslot
-         ;;
-    [$firstslot-$lastslot])
-         load=$1
-         ;;
-    clean)
-         load=$cleanslot
-         ;;
-    *)
-       answer=`_ '<none> %s: illegal request: "%s"' "$myname" "$whichslot"`
-       echo `_ 'Exit ->'` $answer >> $logfile
-       echo $answer
-       exit 1
-       ;;
-    esac
-
-    if [ $load = $used ]; then
-        answer="$used $tape"
-       echo `_ 'Exit ->'` $answer >> $logfile
-       echo $answer
-       exit 0
-    fi
-
-    if [ $load = $cleanslot ]; then
-       expr $cleancount + 1 > $cleanfile
-       echo 0 > $accessfile
-    else
-       expr $accesscount + 1 > $accessfile
-       if [ $accesscount -gt 9 ]; then
-               $myname -slot clean >/dev/null
-       fi
-    fi
-
-    # Slot 6 might contain an ordinary tape rather than a cleaning
-    # tape. A cleaning tape auto-ejects; an ordinary tape does not.
-    # We therefore have to read the status again to check what
-    # actually happened.
-    readstatus
-       
-
-    if [ $used -gt 0 ];then
-      echo "     -> unload $used" >> $logfile
-      res=`$MTX -u $used`
-      status=$?
-      echo "     -> status $status" >> $logfile
-      echo "     -> res    $res" >> $logfile
-      if [ $status -ne 0 ];then
-        answer=`_ '<none> %s: %s' "$myname" "$res"`
-       echo `_ 'Exit ->'` $answer >> $logfile
-       echo $answer
-       exit 2
-      fi
-    fi
-    if [ $whichslot = advance ];then
-      answer="$load /dev/null"
-      echo `_ 'Exit ->'` $answer >> $logfile
-      echo $answer
-      exit 0
-    fi
-    echo `_ '     -> load   %s' "$load"` >> $logfile
-    res=`$MTX -l $load`
-    status=$?
-    echo `_ '     -> status %s' "$status"` >> $logfile
-    echo `_ '     -> result %s' "$res"` >> $logfile
-    if [ $status -eq 0 ];then
-      amdevcheck_status $tape
-      answer="$load $tape"
-      code=0
-    else
-      answer="$load $res"
-      code=2
-    fi
-    echo `_ 'Exit ->'` $answer >> $logfile
-    echo $answer
-    exit $code
-}
-#
-info() {
-  readstatus
-  echo "     -> info   $used" >> $logfile
-  if [ $used -lt 0 ];then
-    used=0
-  fi
-  answer="$used $lastslot 1"
-  echo `_ 'Exit ->'` $answer >> $logfile
-  echo $answer
-  exit 0
-}
-#
-echo Args "->" "$@" >> $logfile
-while [ $# -ge 1 ];do
-  case $1 in
-    -slot)
-          shift
-          loadslot $*
-          ;;
-    -info)
-          shift
-          info
-          ;;
-    -reset)
-           shift
-           reset
-           ;;
-    -eject)
-           shift
-           eject
-           ;;
-    *)
-       answer=`_ '<none> %s: Unknown option %s' "$myname" "$1"`
-       echo `_ 'Exit ->'` $answer >> $logfile
-       echo $answer
-       exit 2
-       ;;
-  esac
-done