+++ /dev/null
-#!@SHELL@
-#
-# Author: Robert Dege
-#
-#
-# version 1.2
-# -----------
-# fixed last_cleaned file so that if it doesn't exist, it gets created with current date, not '0,0'
-# fixed a bug that was reporting the wrong slot # to amcheck
-#
-# version 1.1
-# -----------
-# amverify was failing when using -slot current. Fixed exit $code from 1 -> 0.
-# removed useless $current variables from movetape() function.
-#
-#
-#
-# Exit Status:
-# 0 Alles Ok
-# 1 Illegal Request
-# 2 Fatal Error
-#
-
-
-#
-# Set Path so that it includes Amanda binaries, and access to tapechanger & drive programs
-#
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-sbindir=@sbindir@
-libexecdir=@libexecdir@
-
-PATH=$sbindir:$libexecdir:/usr/bin:/bin:/usr/sbin:/sbin:/usr/ucb:/usr/local/bin
-export PATH
-
-
-#
-# Define Suffix for amanda binaries
-#
-USE_VERSION_SUFFIXES="@USE_VERSION_SUFFIXES@"
-if test "$USE_VERSION_SUFFIXES" = "yes"; then
- SUF="-@VERSION@"
-else
- SUF=
-fi
-
-
-#
-# Load configuration data from the config file
-#
-
-ourconf=`amgetconf$SUF changerfile`
-myname=$0
-
-
-if [ ! -f "$ourconf" ]; then
- code=2
- echo "Command Line -> $myname $@\nExit($code): $ourconf not found as listed in amanda.conf"
- exit $code
-fi
-
-
-# grab mcutil info
-tmpval1=`grep ^mcutil $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^mcutil $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): mcutil not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- MCUTIL=$tmpval2
-else
- MCUTIL=$tmpval1
-fi
-
-
-# grab tape info
-tmpval1=`grep ^tape $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^tape $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): tape not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- tape=$tmpval2
-else
- tape=$tmpval1
-fi
-
-
-# grab firstslot info
-tmpval1=`grep ^firstslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^firstslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): firstslot not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- firstslot=$tmpval2
-else
- firstslot=$tmpval1
-fi
-
-
-# grab lastslot info
-tmpval1=`grep ^lastslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^lastslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): lastslot not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- lastslot=$tmpval2
-else
- lastslot=$tmpval1
-fi
-
-
-# grab use_cleaning info
-tmpval1=`grep ^use_cleaning $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^use_cleaning $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): use_cleaning not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- use_cleaning=$tmpval2
-else
- use_cleaning=$tmpval1
-fi
-
-
-# grab cleanslot info
-tmpval1=`grep ^cleanslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleanslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): cleanslot not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleanslot=$tmpval2
-else
- cleanslot=$tmpval1
-fi
-
-
-# grab cleansleep info
-tmpval1=`grep ^cleansleep $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleansleep $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): cleansleep not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleansleep=$tmpval2
-else
- cleansleep=$tmpval1
-fi
-
-
-# grab cleanme info
-tmpval1=`grep ^cleanme $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleanme $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): cleanme not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleanme=$tmpval2
-else
- cleanme=$tmpval1
-fi
-
-
-# grab cleanfile info
-tmpval1=`grep ^cleanfile $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleanfile $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): cleanfile not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleanfile=$tmpval2
-else
- cleanfile=$tmpval1
-fi
-
-
-# grab lastfile info
-tmpval1=`grep ^lastfile $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^lastfile $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): lastfile not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- lastfile=$tmpval2
-else
- lastfile=$tmpval1
-fi
-
-
-# grab currentslot info
-tmpval1=`grep ^currentslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^currentslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): currentslot not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- currentslot=$tmpval2
-else
- currentslot=$tmpval1
-fi
-
-
-# grab logfile info
-tmpval1=`grep ^logfile $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^logfile $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): logfile not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- logfile=$tmpval2
-else
- logfile=$tmpval1
-fi
-
-[ ! -w $logfile ] && logfile=/dev/null
-
-
-# grab slot0source info
-tmpval1=`grep ^slot0source $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^slot0source $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo "Command Line -> $myname $@ \nExit($code): slot0source not specified in $ourconf"
- exit $code
-elif [ -z "$tmpval1" ]; then
- slot0source=$tmpval2
-else
- slot0source=$tmpval1
-fi
-
-
-
-#
-# Verify currentslot contains a value
-#
-if [ ! -f $currentslot ] || [ `cat $currentslot` -lt $firstslot ];then
- readstatus
- echo $used > $currentslot
-fi
-
-current=`cat $currentslot`
-
-
-# Start logging to $logfile
-echo "\n\n==== `date` ====" >> $logfile
-echo "Command Line -> $myname $@" >> $logfile
-
-
-#
-# is Use Cleaning activated?
-#
-if [ $use_cleaning -eq 1 ]; then
- curday=`date +%j`
- curyear=`date +%Y`
-
- [ ! -f $cleanfile ] && echo 0 > $cleanfile
- [ ! -f $lastfile ] && echo $curday,$curyear > $lastfile
-
-
-#
-# Check to see when tape drive was last cleaned
-# output warning message if it's been too long
-# Currently, if it's been more than 45days, then
-# an error message is displayed everytime the
-# script is called, until the clean parameter
-# is run
-#
- cleaned=`cat $cleanfile`
- lastcleaned=`cut -d, -f1 $lastfile`
- yearcleaned=`cut -d, -f2 $lastfile`
-
- if [ `expr $curday - $lastcleaned` -lt 0 ];then
- diffday=`expr $curday - $lastcleaned + 365`
- diffyear=`expr $curyear - $yearcleaned - 1`
- else
- diffday=`expr $curday - $lastcleaned`
- diffyear=`expr $curyear - $yearcleaned`
- fi
-
- if [ $diffday -gt $cleanme ] || [ $diffyear -ge 1 ];then
- if [ $diffyear -ge 1 ];then
- echo "Warning, it's been $diffyear year(s) & $diffday days since you last cleaned the tape drive!"
- else
- echo "Warning, it's been $diffday days since you last cleaned the tape drive!"
- fi
- fi
-
-fi
-
-
-#
-# Read if there is a tape in the tape drive
-# If so, determine what slot is the tape from
-#
-readstatus() {
- echo -n "querying tape drive....." >> $logfile
- used=`expr \`$MCUTIL -e drive | tr = \] | cut -d\] -f2\` - $slot0source`
- echo " Done" >> $logfile
-
- # Give changer a chance to reset itself
- sleep 3
-}
-
-
-#
-# If tape is in the drive, eject it
-#
-eject() {
- echo "tape drive eject was called" >> $logfile
-
- readstatus
-
- if [ $used -ge $firstslot ];then
- $MCUTIL -m drive slot:$used
- code=$?
- else
- code=1
- fi
-
- if [ $code -eq 0 ];then
- answer="Cartridge $used successfully ejected from $tape"
- echo "Exit($code): $answer" >> $logfile
- echo $current $tape #For amtape output
- return $code
- elif [ $code -eq 1 ];then
- answer="No Cartridge in Tape Drive"
- echo "Exit($code): $answer" >> $logfile
- echo $current $answer #For amtape output
- exit $code
- else
- answer="Tape abnormally failed"
- echo "Exit($code): $answer" >> $logfile
- echo $current $answer #For amtape output
- exit $code
- fi
-}
-
-
-#
-# reset tape drive to a current state.
-# This involves ejecting the current tape (if occupied)
-# and inserting the tape in $firstslot
-#
-reset() {
- echo "tape drive reset was called" >> $logfile
-
- readstatus
-
- if [ $used -ge $firstslot ];then
- eject
- fi
-
- res=`$MCUTIL -m slot:$firstslot drive`
- code=$?
-
-
- if [ $code -eq 0 ];then
- echo $firstslot > $currentslot
- answer="$firstslot - Tape drive was successfully reset"
- elif [ $code -eq 1 ];then
- answer="$firstslot - Tape drive reset failed\nCommand -> $res"
- else
- code=2
- answer="$firstlot - Tape abnormally failed -> $res"
- fi
-
- echo "Exit($code): slot $answer" >> $logfile
- echo $firstslot #For amtape output
- exit $code
-}
-
-
-
-
-#
-# Load a specific cartridge into the changer
-#
-loadslot() {
- echo "loadslot was called" >> $logfile
-
- readstatus
-
- whichslot=$1
-
- case $whichslot in
- current)
- if [ $current -ge $firstslot ];then
- load=$current
- else
- load=$used
- fi
-
- movetape
- ;;
- next|advance)
- [ $used -lt $firstslot ] && used=$current
-
- load=`expr $used + 1`
- [ $load -gt $lastslot ] && load=$firstslot
-
- if [ $whichslot = advance ];then
- echo $load > $currentslot
- code=0
- answer="advancing to slot $load"
- echo "Exit($code): $answer" >> $logfile
- echo $load $code
- exit $code
- else
- movetape
- fi
- ;;
- prev)
- [ $used -lt $firstslot ] && used=$current
-
- load=`expr $used - 1`
- [ $load -lt $firstslot ] && load=$lastslot
- movetape
- ;;
- first)
- load=$firstslot
- movetape
- ;;
- last)
- load=$lastslot
- movetape
- ;;
- [$firstslot-$lastslot])
- load=$1
- movetape
- ;;
- clean)
- if [ use_cleaning -eq 1 ];then
- current=$cleanslot
- eject
- $MCUTIL slot:$cleanslot drive
- sleep $cleansleep
- echo "$curday,$curyear" > $lastfile
- echo `expr $cleaned + 1` > $cleanfile
- reset
- else
- code=1
- answer="Cleaning not enabled in config" >> $logfile
- echo "Exit($code): $answer" >> $logfile
- echo $cleanslot $answer
- exit $code
- fi
- ;;
- *)
- code=1
- answer="\"$whichslot\" invalid menu option"
- echo "Exit($code): slot $answer" >> $logfile
- echo "$answer"
- exit $code
- ;;
- esac
-}
-
-
-#
-# sub-function that slot calls to actually eject the tape
-# & load in the correct slot cartridge
-#
-movetape() {
-
- # If the requested slot is already loaded in the tape drive
- if [ $load -eq $used ]; then
- code=0
- answer="$load is already loaded"
- echo "Exit($code): slot $answer" >> $logfile
- echo $load $tape # For amtape output
- exit $code
- elif [ $used -ge $firstslot ];then
- current=$load
- eject
- else
- echo $load $tape # For amtape output
- fi
-
- echo "Loading slot $load into Tape drive" >> $logfile
- $MCUTIL -m slot:$load drive
- code=$?
-
- if [ $code -eq 0 ];then
- echo $load > $currentslot
- answer="Cartridge $load successfully loaded in Tape drive"
- else
- answer="Cartridge $load failed to load in Tape drive"
- fi
- echo "Exit($code): $answer" >> $logfile
- exit $code
-}
-
-
-info() {
- echo "tape drive info was called" >> $logfile
-
- readstatus
-
- if [ $used -lt 0 ];then
- used=0
- fi
-
- code=0
- answer="$used $lastslot 1"
- echo "Exit($code): $answer" >> $logfile
- echo "$answer"
- exit $code
-}
-
-
- case $1 in
- -slot)
- shift
- loadslot $*
- ;;
- -device)
- echo $tape
- ;;
- -info)
- shift
- info
- ;;
- -reset)
- shift
- reset
- ;;
- -eject)
- shift
- eject
- ;;
- --help|-help)
- echo "-slot {current|next|previous|first|last|$firstslot-$lastslot|clean}"
- echo " current - show contents of current slot"
- echo " next - load tape from next slot"
- echo " previous - load tape from previous slot"
- echo " first - load tape from first slot"
- echo " last - load tape from last slot"
- echo " $firstslot - $lastslot - load tape from slot <slot #>"
- echo " clean - Clean the drive"
- echo "-device : Show current tape device"
- echo "-reset : Reset changer to known state"
- echo "-eject : Eject current tape from drive"
- echo "-info : Output {current slot | # of slots | can changer go backwards}"
- echo "-help : Display this help"
- ;;
- *)
- echo "<usage> $myname -{slot|device|reset|eject|help}"
- ;;
- esac
projects / debian / amanda / blobdiff