+++ /dev/null
-#!@SHELL@
-#
-# Author: Robert Dege
-#
-#
-# version 1.2
-# -----------
-# fixed last_cleaned file so that if it doesn't exist, it gets created with current date, not '0,0'
-# fixed a bug that was reporting the wrong slot # to amcheck
-#
-# version 1.1
-# -----------
-# amverify was failing when using -slot current. Fixed exit $code from 1 -> 0.
-# removed useless $current variables from movetape() function.
-#
-#
-#
-# Exit Status:
-# 0 Alles Ok
-# 1 Illegal Request
-# 2 Fatal Error
-#
-
-
-#
-# Set Path so that it includes Amanda binaries, and access to tapechanger & drive programs
-#
-prefix="@prefix@"
-exec_prefix="@exec_prefix@"
-sbindir="@sbindir@"
-amlibexecdir="@amlibexecdir@"
-. "${amlibexecdir}/amanda-sh-lib.sh"
-
-# add sbin and ucb dirs
-PATH="$PATH:/usr/sbin:/sbin:/usr/ucb"
-export PATH
-
-
-#
-# Load configuration data from the config file
-#
-
-ourconf=`amgetconf changerfile`
-myname=$0
-
-
-if [ ! -f "$ourconf" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): %s not found as listed in amanda.conf' "$code" "$ourconf"` 1>&2
- exit $code
-fi
-
-
-# grab mcutil info
-tmpval1=`grep ^mcutil $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^mcutil $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): mcutil not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- MCUTIL=$tmpval2
-else
- MCUTIL=$tmpval1
-fi
-
-
-# grab tape info
-tmpval1=`grep ^tape $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^tape $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): tape not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- tape=$tmpval2
-else
- tape=$tmpval1
-fi
-
-
-# grab firstslot info
-tmpval1=`grep ^firstslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^firstslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): firstslot not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- firstslot=$tmpval2
-else
- firstslot=$tmpval1
-fi
-
-
-# grab lastslot info
-tmpval1=`grep ^lastslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^lastslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): lastslot not specified in %s' "$code" "$ourconf"` 1>&2
-elif [ -z "$tmpval1" ]; then
- lastslot=$tmpval2
-else
- lastslot=$tmpval1
-fi
-
-
-# grab use_cleaning info
-tmpval1=`grep ^use_cleaning $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^use_cleaning $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): use_cleaning not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- use_cleaning=$tmpval2
-else
- use_cleaning=$tmpval1
-fi
-
-
-# grab cleanslot info
-tmpval1=`grep ^cleanslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleanslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): cleanslot not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleanslot=$tmpval2
-else
- cleanslot=$tmpval1
-fi
-
-
-# grab cleansleep info
-tmpval1=`grep ^cleansleep $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleansleep $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): cleansleep not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleansleep=$tmpval2
-else
- cleansleep=$tmpval1
-fi
-
-
-# grab cleanme info
-tmpval1=`grep ^cleanme $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleanme $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): cleanme not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleanme=$tmpval2
-else
- cleanme=$tmpval1
-fi
-
-
-# grab cleanfile info
-tmpval1=`grep ^cleanfile $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^cleanfile $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): cleanfile not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- cleanfile=$tmpval2
-else
- cleanfile=$tmpval1
-fi
-
-
-# grab lastfile info
-tmpval1=`grep ^lastfile $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^lastfile $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): lastfile not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- lastfile=$tmpval2
-else
- lastfile=$tmpval1
-fi
-
-
-# grab currentslot info
-tmpval1=`grep ^currentslot $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^currentslot $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): currentslot not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- currentslot=$tmpval2
-else
- currentslot=$tmpval1
-fi
-
-
-# grab logfile info
-tmpval1=`grep ^logfile $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^logfile $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): logfile not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- logfile=$tmpval2
-else
- logfile=$tmpval1
-fi
-
-[ ! -w $logfile ] && logfile=/dev/null
-
-
-# grab slot0source info
-tmpval1=`grep ^slot0source $ourconf | awk -F\ '{print $2}'`
-tmpval2=`grep ^slot0source $ourconf | awk -F= '{print $2}'`
-if [ -z "$tmpval1" ] && [ -z "$tmpval2" ]; then
- code=2
- echo `_ 'Command Line ->'` $myname $@
- echo `_ 'Exit(%s): slot0source not specified in %s' "$code" "$ourconf"` 1>&2
- exit $code
-elif [ -z "$tmpval1" ]; then
- slot0source=$tmpval2
-else
- slot0source=$tmpval1
-fi
-
-
-
-#
-# Verify currentslot contains a value
-#
-if [ ! -f $currentslot ] || [ `cat $currentslot` -lt $firstslot ];then
- readstatus
- echo $used > $currentslot
-fi
-
-current=`cat $currentslot`
-
-
-# Start logging to $logfile
-echo "\n\n==== `date` ====" >> $logfile
-echo `_ 'Command Line ->'` $myname $@ >> $logfile
-
-
-#
-# is Use Cleaning activated?
-#
-if [ $use_cleaning -eq 1 ]; then
- curday=`date +%j`
- curyear=`date +%Y`
-
- [ ! -f $cleanfile ] && echo 0 > $cleanfile
- [ ! -f $lastfile ] && echo $curday,$curyear > $lastfile
-
-
-#
-# Check to see when tape drive was last cleaned
-# output warning message if it's been too long
-# Currently, if it's been more than 45days, then
-# an error message is displayed everytime the
-# script is called, until the clean parameter
-# is run
-#
- cleaned=`cat $cleanfile`
- lastcleaned=`cut -d, -f1 $lastfile`
- yearcleaned=`cut -d, -f2 $lastfile`
-
- if [ `expr $curday - $lastcleaned` -lt 0 ];then
- diffday=`expr $curday - $lastcleaned + 365`
- diffyear=`expr $curyear - $yearcleaned - 1`
- else
- diffday=`expr $curday - $lastcleaned`
- diffyear=`expr $curyear - $yearcleaned`
- fi
-
- if [ $diffday -gt $cleanme ] || [ $diffyear -ge 1 ];then
- if [ $diffyear -ge 1 ];then
- echo `_ "Warning, it's been %s year(s) & %s day(s) since you last cleaned the tape drive!" "$diffyear" "$diffday"`
- else
- echo `_ "Warning, it's been %s day(s) since you last cleaned the tape drive!" "$diffday"`
- fi
- fi
-
-fi
-
-
-#
-# Read if there is a tape in the tape drive
-# If so, determine what slot is the tape from
-#
-readstatus() {
- echo `_ "querying tape drive....."` >> $logfile
- used=`expr \`$MCUTIL -e drive | tr = \] | cut -d\] -f2\` - $slot0source`
- echo `_ " Done"` >> $logfile
-
- # Give changer a chance to reset itself
- sleep 3
-}
-
-
-#
-# If tape is in the drive, eject it
-#
-eject() {
- echo `_ "tape drive eject was called"` >> $logfile
-
- readstatus
-
- if [ $used -ge $firstslot ];then
- $MCUTIL -m drive slot:$used
- code=$?
- else
- code=1
- fi
-
- if [ $code -eq 0 ];then
- answer=`_ 'Cartridge %s successfully ejected from %s' "$used" "$tape"`
- echo `_ "Exit(%s): %s" "$code" "$answer"` >> $logfile
- echo $current $answer #For amtape output
- return $code
- elif [ $code -eq 1 ];then
- answer=`_ "No Cartridge in Tape Drive"`
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo $current $answer #For amtape output
- exit $code
- else
- answer=`_ 'Tape abnormally failed'`
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo $current $answer #For amtape output
- exit $code
- fi
-}
-
-
-#
-# reset tape drive to a current state.
-# This involves ejecting the current tape (if occupied)
-# and inserting the tape in $firstslot
-#
-reset() {
- echo `_ 'tape drive reset was called'` >> $logfile
-
- readstatus
-
- if [ $used -ge $firstslot ];then
- eject
- fi
-
- res=`$MCUTIL -m slot:$firstslot drive`
- code=$?
-
-
- if [ $code -eq 0 ];then
- echo $firstslot > $currentslot
- answer=`_ '%s - Tape drive was successfully reset' "$firstslot"`
- elif [ $code -eq 1 ];then
- answer=`_ '%s - Tape drive reset failed\nCommand -> %s' "$firstslot" "$res"`
- else
- code=2
- answer=`_ '%s - Tape abnormally failed -> %s' "$firstslot" "$res"`
- fi
-
- echo `_ 'Exit(%s): slot %s' "$code" "$answer"` >> $logfile
- echo $firstslot #For amtape output
- exit $code
-}
-
-
-
-
-#
-# Load a specific cartridge into the changer
-#
-loadslot() {
- echo `_ "loadslot was called"` >> $logfile
-
- readstatus
-
- whichslot=$1
-
- case $whichslot in
- current)
- if [ $current -ge $firstslot ];then
- load=$current
- else
- load=$used
- fi
-
- movetape
- ;;
- next|advance)
- [ $used -lt $firstslot ] && used=$current
-
- load=`expr $used + 1`
- [ $load -gt $lastslot ] && load=$firstslot
-
- if [ $whichslot = advance ];then
- echo $load > $currentslot
- code=0
- answer=`_ 'advancing to slot %s' "$load"`
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo $load $code
- exit $code
- else
- movetape
- fi
- ;;
- prev)
- [ $used -lt $firstslot ] && used=$current
-
- load=`expr $used - 1`
- [ $load -lt $firstslot ] && load=$lastslot
- movetape
- ;;
- first)
- load=$firstslot
- movetape
- ;;
- last)
- load=$lastslot
- movetape
- ;;
- [$firstslot-$lastslot])
- load=$1
- movetape
- ;;
- clean)
- if [ use_cleaning -eq 1 ];then
- current=$cleanslot
- eject
- $MCUTIL slot:$cleanslot drive
- sleep $cleansleep
- echo "$curday,$curyear" > $lastfile
- echo `expr $cleaned + 1` > $cleanfile
- reset
- else
- code=1
- answer=`_ "Cleaning not enabled in config"`
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo $cleanslot $answer
- exit $code
- fi
- ;;
- *)
- code=1
- answer=`_ '"%s" invalid menu option' "$whichslot"`
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo "$answer"
- exit $code
- ;;
- esac
-}
-
-
-#
-# sub-function that slot calls to actually eject the tape
-# & load in the correct slot cartridge
-#
-movetape() {
-
- # If the requested slot is already loaded in the tape drive
- if [ $load -eq $used ]; then
- code=0
- answer=`_ 'slot %s is already loaded' "$load"`
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo $load $tape # For amtape output
- exit $code
- elif [ $used -ge $firstslot ];then
- current=$load
- eject
- else
- echo $load $tape # For amtape output
- fi
-
- echo `_ 'Loading slot %s into Tape drive' "$load"` >> $logfile
- $MCUTIL -m slot:$load drive
- code=$?
-
- if [ $code -eq 0 ];then
- echo $load > $currentslot
- answer=`_ 'Cartridge %s successfully loaded in Tape drive' "$load"`
- else
- answer=`_ 'Cartridge %s failed to load in Tape drive' "$load"`
- fi
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- exit $code
-}
-
-
-info() {
- echo `_ 'tape drive info was called'` >> $logfile
-
- readstatus
-
- if [ $used -lt 0 ];then
- used=0
- fi
-
- code=0
- answer="$used $lastslot 1"
- echo `_ 'Exit(%s): %s' "$code" "$answer"` >> $logfile
- echo "$answer"
- exit $code
-}
-
-
- case $1 in
- -slot)
- shift
- loadslot $*
- ;;
- -device)
- echo $tape
- ;;
- -info)
- shift
- info
- ;;
- -reset)
- shift
- reset
- ;;
- -eject)
- shift
- eject
- ;;
- --help|-help)
- echo `_ '-slot {current|next|previous|first|last|%s-%s|clean}' "$firstslot" "$lastslot"`
- echo `_ ' current - show contents of current slot'`
- echo `_ ' next - load tape from next slot'`
- echo `_ ' previous - load tape from previous slot'`
- echo `_ ' first - load tape from first slot'`
- echo `_ ' last - load tape from last slot'`
- echo `_ ' %s - %s - load tape from slot <slot #>' "$firstslot" "$lastslot"`
- echo `_ ' clean - Clean the drive'`
- echo `_ '-device : Show current tape device'`
- echo `_ '-reset : Reset changer to known state'`
- echo `_ '-eject : Eject current tape from drive'`
- echo `_ '-info : Output {current slot | # of slots | can changer go backwards}'`
- echo `_ '-help : Display this help'`
- ;;
- *)
- echo `_ "<usage> %s -{slot|device|reset|eject|help}" "$myname"`
- ;;
- esac