flash/nor: remove empty command definitions

[fw/openocd] / TODO

diff --git a/TODO b/TODO
index aa2277c1a0b1b7a8c6fc365066451c8c796cff00..ebb6c9980832dd1d76a00d38c6d2e3b18e194dbd 100644 (file)
--- a/TODO
+++ b/TODO
@@ -37,11 +37,33 @@ This section provides possible things to improve with OpenOCD's TCL support.
     - See src/jtag/core.c and src/jtag/tcl.c for an example.
     - allow some of these TCL command modules to be dynamically loadable?
 
-@section thelistjtag JTAG
-
-This section list issues that need to be resolved in the JTAG layer.
-
-@subsection thelistjtagcore JTAG Core
+@section thelistadapter Adapter
+
+This section list issues that need to be resolved in the Adapter layer.
+
+@subsection thelistadapterrework Code restructuring
+
+This section lists pending reworks to complete the restructure from the
+old JTAG centric implementation to a generic Adapter layer.
+This restructuring is very invasive and will prevent the merge of several
+changes pending in gerrit.
+
+- rename folder src/jtag/ to src/adapter/
+- rename var "jtag" to "adapter" in src/jtag/core.c
+- split content of src/adapter/ in the different protocols jtag.[ch],
+  swd.[ch], ...
+- wrap the calls to adapter->transport_ops->api() with transport_api()
+  and reduce the visibility of global var "adapter"
+- complete the migration of JTAG-only drivers to adapter->reset()
+- try to remove JTAG_SLEEP also from JTAG mode?
+- tap_set_state(TAP_RESET) is already done in src/jtag/core.c. No need
+  to replicate it in the drivers, apart in case the driver sets TRST
+  independently
+- add .hla_ops to "adapter"
+- HLA is a API level (.hla_ops). Transport should simply be {jtag,swd},
+  not {hla_jtag,hla_swd}.
+
+@subsection thelistadapterjtagcore JTAG Core
 
 The following tasks have been suggested for cleaning up the JTAG layer:
 
@@ -63,9 +85,9 @@ The following tasks have been suggested for adding new core JTAG support:
   - (ab)use bit-banging JTAG interfaces to emulate SPI/UART
   - allow SPI to program flash, MCUs, etc.
 
-@subsection thelistjtaginterfaces JTAG Interfaces
+@subsection thelistadapterinterfaces Interface drivers
 
-There are some known bugs to fix in JTAG adapter drivers:
+There are some known bugs to fix in Interface drivers:
 
 - For JTAG_STATEMOVE to TAP_RESET, all drivers must ignore the current
   recorded state.  The tap_get_state() call won't necessarily return
@@ -93,9 +115,6 @@ interface support:
   -# rewrite implementation to use non-blocking I/O
 - J-Link driver:
   - fix to work with long scan chains, such as R.Doss's svf test.
-- FT2232 (libftdi):
-  - make performance comparable to alternatives (on Win32, D2XX is faster)
-  - make usability comparable to alternatives
 - Autodetect USB based adapters; this should be easy on Linux.  If there's
   more than one, list the options; otherwise, just select that one.
 
@@ -110,10 +129,6 @@ of a minidriver is required to capture all the jtag_add_xxx()
 fn's at a high enough level and repackage these cmd's as
 TCP/IP packets handled by the server.
 
-@section thelistswd Serial Wire Debug
-
-- implement Serial Wire Debug interface
-
 @section thelistbs Boundary Scan Support
 
 - add STAPL support?
@@ -170,9 +185,9 @@ https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
   garabage.
   - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
 - Thumb2 single stepping: ARM1156T2 needs simulator support
-- Cortex A8 support (ML)
+- Cortex-A8 support (ML)
   - add target implementation (ML)
-- Cortex M3 support
+- Cortex-M3 support
   - when stepping, only write dirtied registers (be faster)
   - when connecting to halted core, fetch registers (startup is quirky)
 - Generic ARM run_algorithm() interface
@@ -214,7 +229,6 @@ https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
 
 - finish documentation for the following flash drivers:
   - avr
-  - ecosflash
   - pic32mx
   - ocl
   - str9xpec
@@ -369,7 +383,6 @@ to complete:
   - committing to git
 - Review Users' Guide for documentation errors or omissions
   - "capture" and "ocd_find" commands
-  - "ocd_" prefix on various stuff
 - Update Developer's Manual (doxygen output)
   - Add documentation describing the architecture of each module
   - Provide more Technical Primers to bootstrap contributor knowledge
@@ -378,4 +391,3 @@ to complete:
 /** @file
 This file contains the @ref thelist page.
 */
-