-- Additional cores. ARM9E(J)-S, ARM7TDMI-S, TI925, ...
-- Testing.
-- Additional jtag interfaces. Currently, only Wiggler style interfaces and
- USBJTAG-1 are supported.
-- Testing.
-- Handle endianess. The configuration variable is there, but that's about it.
- Currently, only little-endian targets and little-endian hosts are supported.
+/** @page thelist Pending and Open Tasks
+
+This page lists pending and open tasks being considered or worked upon
+by the OpenOCD community.
+
+
+Items with a current patch available should include a link to its
+posting on the openocd-developer mailing list archives.
+
+Some items may be in progress, usually indicated by the individual whose
+initials in parentheses following it. A key for decoding these initials
+appears after The List.
+
+Most items are open for the taking, but please post to the mailing list
+before spending much time working on anything lists here. The community
+may have evolved an idea since it was added here.
+
+Feel free to send patches to add or clarify items on this list, too.
+
+@verbatim
+==================================================================
+ The List
+------------------------------------------------------------------
+@endverbatim
+
+- JTAG/TAP changes:
+ - update all drivers to use tap_get_tms_path_len API.
+ - use tap_set_state everywhere to allow logging TAP state transitions
+ - rename other tap_states to use standard JTAG names (suggested by ML)
+ - retire jtag_add_end_state() and replace w/global variable. This also
+ removes TAP_INVALID as an argument to jtag_add_xxxx(). The global variable
+ as argument to jtag_add_xxxx() should eventually be phased out, but
+ the global variable is useful in an interim phase where one needs to
+ be bug by bug compatible before each change can be tested. Suggested
+ by ØH. Michael Bruck also interested in this.
+
+- JTAG Interfaces:
+ - autodetect devices present on the scan chain
+ - implement 'discover_taps' command
+ - FT2232 driver: (DH)
+ - integrate FTD2XX High-Speed Device support
+ - PATCH: https://lists.berlios.de/pipermail/openocd-development/2009-April/005479.html
+ - massive set of changes (DH):
+ - fixes non-recoverability of cable connect/reconnect
+ - https://lists.berlios.de/pipermail/openocd-development/2009-May/006011.html
+ - further cleanup (DH):
+ - PATCH: https://lists.berlios.de/pipermail/openocd-development/2009-May/006112.html
+ - fix outstanding bugs
+ - J-Link driver: (ZW)
+ - fix outstanding bugs
+ - test with known targets (i.e. working with other interfaces)
+ - test compatibility between v6.0 (yellow) and older units (e.g. v5.2)
+ - TCP driver:
+ - add TCP/IP client and server for remote JTAG interface control
+ - Do others need some help? Probably....
+
+- Other Interfaces
+ - SVF/XSVF:
+ - pending tasks??
+ - SPI/UART emulation:
+ - (ab)use bit-banging JTAG interfaces to emulate SPI/UART
+ - allow SPI to program flash, MCUs, etc.
+ - SWD
+
+- Target Support:
+ - general layer cleanup:
+ - https://lists.berlios.de/pipermail/openocd-development/2009-May/006590.html
+ - ARM11 improvements (MB?)
+ - fix single stepping (reported by ØH)
+ - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
+ - Cortex A8 support (ML)
+ - add target implementation (ML)
+ - what else remains to be done?
+ - MC1322x support (JW/DE?)
+ - integrate and test support from JW (and DE?)
+ - get working with a known good interface (i.e. not today's jlink)
+ - AT91SAM92xx:
+ - improvements for unknown-board-atmel-at91sam9260.cfg (RD)
+ - STR9x: (ZW)
+ - improvements to str912.cfg to be more general purpose
+ - AVR: (SQ)
+ - independently verify implementation
+ - incrementally improve working prototype in trunk. (SQ)
+ - work out how to debug this target
+ - AVR debugging protocol.
+ - FPGA:
+ - improve things (??)
+ - Coldfire (suggested by NC)
+ - can we draw from the BDM project? @par
+ http://bdm.sourceforge.net/
+
+ - other targets? (suggestions always welcome)
+
+- CFI:
+ - finish implementing bus width/chip width handling (suggested by NC)
+ - factor vendor-specific code into separate source files
+ - add new callback interface for vendor-specific code
+ - investigate/implement "thin wrapper" to use eCos CFI drivers (ØH)
+
+- TCL
+ - Isolate all TCL command support:
+ - Allow pure C CLI implementations using --disable-builtin-tcl.
+ Ref? How could this be made to work given targets extensive need
+ for events, etc.? What about the target library?
+ - Allow full TCL support? add --with-tcl=/path/to/installed/tcl
+ - Move TCL support in foo.* to foo_tcl.* (other ideas?)
+
+- Debugger Support
+ - Keil AGDI interface to OpenOCD (submitted by Dario Vecchio)
+
+- Architectural Upgrades
+ - Allow N:M:P mapping of servers, targets, and interfaces
+ - loadable module support for interface/target/flash drivers
+ - libopenocd support: @par
+ https://lists.berlios.de/pipermail/openocd-development/2009-May/006405.html
+
+- Test Suite:
+ - implement server unit tests
+ - implement JTAG core unit tests
+ - implement JTAG interface unit tests
+ - implement flash unit tests
+ - implement target unit tests
+
+- Test Feedback Tools: @par
+ https://lists.berlios.de/pipermail/openocd-development/2009-May/006358.html
+
+ - extend target test script to produce helpful pass/fail output
+ - provide results submission script
+
+
+- Generic Hardware Tester:
+ - implement VHDL to use for FPGA-based JTAG TAP testing device
+ - develop test suite that utilizes this testing device
+
+- Build Systems (Autotools, CMake, etc.)
+ - investigate fixes to permit the use of -Wshadow
+ - change bootstrap to call 'configure --enable-maintainer-mode <opts>'?
+
+- Miscellaneous:
+ - make JTAG and USB debug output a run-time configuration option
+ - review and clean up interface/target/flash APIs
+ - factor code to eliminate duplicated functionality
+ - overhaul use of types to improve 32/64-bit portability
+
+- Berlios Admin:
+ - use patch tracker? @par
+ https://developer.berlios.de/patch/?group_id=4148
+ - use bug tracking? we need something!
+
+*/
+/** @file
+This file contains the @ref thelist page.
+*/