in the root of repository. You will need to copy it to /etc/udev/rules.d,
and then either reboot or execute
$ udevadm control --reload-rules
+$ udevadm trigger
Udev will now create a /dev/stlinkv2_XX or /dev/stlinkv1_XX file, with the appropriate permissions.
This is currently all the device is for, (only one stlink of each version is supported at
it will use a rather inefficient single-stepping way of doing that.
Set up a breakpoint manually in that case and do `continue'.
+Q: Load command does not work in GDB.
+
+A: Some people report XML/EXPAT is not enabled by default when compiling
+GDB. Memory map parsing thus fail. Use --enable-expat.
+
Currently known working combinations of programmer and target
=============================================================
STLink v2 (as found on the 32L and F4 Discovery boards)
Known Working Targets:
+* STM32F030F4P6 (custom board)
+* STM32F0Discovery (STM32F0 Discovery board)
* STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
* STM32L1xx (STM32L Discovery board)
* STM32F103VC, STM32F107RC, STM32L151RB, STM32F205RE and STM32F405RE on custom boards
(https://github.com/UweBonnes/wiki_fuer_alex/layout/usps...)
+* STM32F103VET6 (HY-STM32 board)
* STM32F303xx (STM32F3 Discovery board)
* STM32F407xx (STM32F4 Discovery board)
* STM32F429I-DISCO (STM32F4 Discovery board with LCD)
* STM32L151CB (custom board)
* STM32L152RB (STM32L-Discovery board, custom board)
-Please report any and all known working combinations so I can update this!
+STLink v2-1 (as found on the Nucleo boards)
+Known Working Targets:
+* STM32F401xx (STM32 Nucleo-F401RE board)
+* STM32F030R8T6 (STM32 Nucleo-F030R8 board)
+* STM32F072RBT6 (STM32 Nucleo-F072RB board)
+* STM32F103RB (STM32 Nucleo-F103RB board)
+* STM32F303RET6 (STM32 Nucleo-F303RE board)
+* STM32F334R8 (STM32 Nucleo-F334R8 board)
+* STM32F411RET6 (STM32 Nucleo-F411RE board)
+Please report any and all known working combinations so I can update this!