openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
-f target/ti_calypso.cfg
- openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+ openocd -f interface/stlink.cfg -c "transport select hla_swd" \
-f target/stm32l0.cfg
After OpenOCD startup, connect GDB with
Flash drivers
-------------
-ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, eSi-TSMC,
-FM3, FM4, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI,
-Marvell QSPI, Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP, SiM3x,
-Stellaris, STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of
-AT91SAM9, LPC3180, LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood,
-S3C24xx, S3C6400, XMC1xxx, XMC4xxx.
+ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, eSi-TSMC, FM3,
+FM4, Freedom E SPI, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900,
+LPCSPIFI, Marvell QSPI, Milandr, NIIET, NuMicro, PIC32mx, PSoC4, PSoC5LP,
+SiM3x, Stellaris, STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of
+AT91SAM9, LPC3180, LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx,
+S3C6400, XMC1xxx, XMC4xxx.
==================
To make pkg-config work nicely for cross-compiling, you might need an
additional wrapper script as described at
- http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html
+ https://autotools.io/pkgconfig/cross-compiling.html
This is needed to tell pkg-config where to look for the target
libraries that OpenOCD depends on. Alternatively, you can specify
*_CFLAGS and *_LIBS environment variables directly, see "./configure
--help" for the details.
+For a more or less complete script that does all this for you, see
+
+ contrib/cross-build.sh
+
Parallel Port Dongles
---------------------
If you want to access the parallel port using the PPDEV interface you
-have to specify both --enable-parport AND --enable-parport-ppdev, since the
+have to specify both --enable-parport AND --enable-parport-ppdev, since
the later option is an option to the parport driver.
The same is true for the --enable-parport-giveio option, you have to