Update list of known working targets

[fw/stlink] / README

diff --git a/README b/README
index 470c52a5977741d648e0660201dd417efe74116b..73686a83d3a216ea198c717a5514e3e21d9a0c5b 100644 (file)
--- a/README
+++ b/README
@@ -102,6 +102,7 @@ If you would link your executable to 0x08000000 and then do
 (gdb) load firmware.elf
 then it would be written to the memory.
 
+
 FAQ
 ===
 
@@ -119,3 +120,24 @@ Q: At some point I use GDB command `next', and it hangs.
 A: Sometimes when you will try to use GDB `next' command to skip a loop,
 it will use a rather inefficient single-stepping way of doing that.
 Set up a breakpoint manually in that case and do `continue'.
+
+Currently known working combinations of programmer and target
+=============================================================
+
+STLink v1 (as found on the 32VL Discovery board)
+
+Known Working Targets:
+* STM32F100xx (Medium Density VL)
+* STM32F103 (according to jpa- on ##stm32
+
+No information:
+* everything else!
+
+STLink v2 (as found on the 32L and F4 Discovery boards)
+Known Working Targets:
+* STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
+* STM32L1xx (STM32L Discovery board)
+* STM32F407xx (STM32F4 Discovery board)
+
+Please report any and all known working combinations so I can update this!
+