[ update ] add ST NUCLEO F030R8 as a working target in README

[fw/stlink] / README

diff --git a/README b/README
index 01751a7cf357a0807e1e50975c0e5f56109b3ad8..4adb21fc6da718a267cf537755bdff22e71e9c50 100644 (file)
--- a/README
+++ b/README
@@ -55,14 +55,22 @@ There are a few options:
 
 ./st-util - usage:
 
-  -h, --help        Print this help
-  -vXX, --verbose=XX    specify a specific verbosity level (0..99)
-  -v, --verbose specify generally verbose logging
+  -h, --help           Print this help
+  -vXX, --verbose=XX   Specify a specific verbosity level (0..99)
+  -v, --verbose                Specify generally verbose logging
   -s X, --stlink_version=X
-            Choose what version of stlink to use, (defaults to 2)
-  -1, --stlinkv1    Force stlink version 1
+                       Choose what version of stlink to use, (defaults to 2)
+  -1, --stlinkv1       Force stlink version 1
   -p 4242, --listen_port=1234
-            Set the gdb server listen port. (default port: 4242)
+                       Set the gdb server listen port. (default port: 4242)
+  -m, --multi
+                       Set gdb server to extended mode.
+                       st-util will continue listening for connections after disconnect.
+  -n, --no-reset
+                       Do not reset board on connection.
+
+The STLINKv2 device to use can be specified in the environment
+variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
 
 Then, in your project directory, someting like this...
 (remember, you need to run an _ARM_ gdb, not an x86 gdb)
@@ -105,6 +113,7 @@ For convenience, you may install udev rules file, 49-stlinkv*.rules, located
 in the root of repository. You will need to copy it to /etc/udev/rules.d,
 and then either reboot or execute
 $ udevadm control --reload-rules
+$ udevadm trigger
 
 Udev will now create a /dev/stlinkv2_XX or /dev/stlinkv1_XX file, with the appropriate permissions.
 This is currently all the device is for, (only one stlink of each version is supported at 
@@ -161,6 +170,7 @@ No information:
 
 STLink v2 (as found on the 32L and F4 Discovery boards)
 Known Working Targets:
+* STM32F0Discovery (STM32F0 Discovery board)
 * STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
 * STM32L1xx (STM32L Discovery board)
 * STM32F103VC, STM32F107RC, STM32L151RB, STM32F205RE and STM32F405RE on custom boards
@@ -172,5 +182,9 @@ Known Working Targets:
 * STM32L151CB (custom board)
 * STM32L152RB (STM32L-Discovery board, custom board)
 
-Please report any and all known working combinations so I can update this!
+STLink v2-1 (as found on the Nucleo boards)
+Known Working Targets:
+* STM32F401xx (STM32 Nucleo-F401RE board) 
+* STM32F030R8T6 (STM32 Nucleo-F030R8 board)
 
+Please report any and all known working combinations so I can update this!