viewed on-line at the following URLs:
OpenOCD User's Guide:
- http://openocd.berlios.de/doc/html/index.html
+ http://openocd.sourceforge.net/doc/html/index.html
OpenOCD Developer's Manual:
- http://openocd.berlios.de/doc/doxygen/index.html
+ http://openocd.sourceforge.net/doc/doxygen/html/index.html
These reflect the latest development versions, so the following section
introduces how to build the complete documentation from the package.
For more information, refer to these documents or contact the developers
by subscribing to the OpenOCD developer mailing list:
- openocd-development@lists.berlios.de
+ openocd-devel@lists.sourceforge.net
Building the OpenOCD Documentation
----------------------------------
--enable-dummy Enable building the dummy JTAG port driver
+ --enable-parport Enable building the pc parallel port driver
+ --disable-parport-ppdev Disable use of ppdev (/dev/parportN) for parport
+ (for x86 only)
+ --enable-parport-giveio Enable use of giveio for parport (for CygWin only)
+
+
--enable-ft2232_libftdi Enable building support for FT2232 based devices
using the libftdi driver, opensource alternate of
FTD2XX
--enable-ft2232_ftd2xx Enable building support for FT2232 based devices
using the FTD2XX driver from ftdichip.com
+ --enable-usb_blaster_libftdi
+ Enable building support for the Altera USB-Blaster
+ using the libftdi driver, opensource alternate of
+ FTD2XX
+ --enable-usb_blaster_ftd2xx
+ Enable building support for the Altera USB-Blaster
+ using the FTD2XX driver from ftdichip.com
+
+ --enable-amtjtagaccel Enable building the Amontec JTAG-Accelerator driver
+
+ --enable-zy1000-master Use ZY1000 JTAG master registers
+ --enable-zy1000 Enable ZY1000 interface
+
+ --enable-ioutil Enable ioutil functions - useful for standalone
+ OpenOCD implementations
+
+ --enable-ep93xx Enable building support for EP93xx based SBCs
+
+ --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs
+
--enable-gw16012 Enable building support for the Gateworks GW16012
JTAG Programmer
- --enable-parport Enable building the pc parallel port driver
- --disable-parport-ppdev Disable use of ppdev (/dev/parportN) for parport
- (for x86 only)
- --enable-parport-giveio Enable use of giveio for parport (for CygWin only)
-
--enable-presto_libftdi Enable building support for ASIX Presto Programmer
using the libftdi driver
--enable-presto_ftd2xx Enable building support for ASIX Presto Programmer
using the FTD2XX driver
- --enable-amtjtagaccel Enable building the Amontec JTAG-Accelerator driver
- --enable-arm-jtag-ew Enable building support for the Olimex ARM-JTAG-EW
+ --enable-usbprog Enable building support for the usbprog JTAG
Programmer
+
+ --enable-oocd_trace Enable building support for some prototype
+ OpenOCD+trace ETM capture hardware
+
--enable-jlink Enable building support for the Segger J-Link JTAG
Programmer
+
+ --enable-vsllink Enable building support for the Versaloon-Link JTAG
+ Programmer
+
--enable-rlink Enable building support for the Raisonance RLink
JTAG Programmer
- --enable-usbprog Enable building support for the usbprog JTAG
+ --enable-ulink Enable building support for the Keil ULINK JTAG
Programmer
- --enable-vsllink Enable building support for the Versaloon-Link JTAG
+ --enable-arm-jtag-ew Enable building support for the Olimex ARM-JTAG-EW
Programmer
- --enable-oocd_trace Enable building support for the OpenOCD+trace ETM
- capture device
+ --enable-buspirate Enable building support for the Buspirate
- --enable-ep93xx Enable building support for EP93xx based SBCs
- --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs
+ --enable-stlink Enable building support for the ST-Link JTAG
+ Programmer
- --enable-ecosboard Enable building support for eCos based JTAG debugger
- --enable-zy1000 Enable ZY1000 interface
+ --enable-osbdm Enable building support for the OSBDM (JTAG only)
+ Programmer
+
+ --enable-opendous Enable building support for the estick/opendous JTAG
+ Programmer
--enable-minidriver-dummy
Enable the dummy minidriver.
- --enable-ioutil Enable ioutil functions - useful for standalone
- OpenOCD implementations
+ --disable-internal-jimtcl
+ Disable building internal jimtcl
+ --enable-libusb0 Use libusb-0.1 library for USB JTAG devices
+ --enable-remote-bitbang Enable building support for the Remote Bitbang jtag
+ driver
--disable-doxygen-html Disable building Doxygen manual as HTML.
--enable-doxygen-pdf Enable building Doxygen manual as PDF.