Common requirements
~~~~~~~~~~~~~~~~~~~
-libusb-1.0 (You probably already have this, but you'll need the
+. libusb-1.0 (You probably already have this, but you'll need the
development version to compile)
+. pkg-config
IF YOU HAVE AN STLINKv1
~~~~~~~~~~~~~~~~~~~~~~~
(gdb) load firmware.elf
then it would be written to the memory.
+
FAQ
===
A: Sometimes when you will try to use GDB `next' command to skip a loop,
it will use a rather inefficient single-stepping way of doing that.
Set up a breakpoint manually in that case and do `continue'.
+
+Currently known working combinations of programmer and target
+=============================================================
+
+STLink v1 (as found on the 32VL Discovery board)
+
+Known Working Targets:
+* STM32F100xx (Medium Density VL)
+* STM32F103 (according to jpa- on ##stm32)
+
+No information:
+* everything else!
+
+STLink v2 (as found on the 32L and F4 Discovery boards)
+Known Working Targets:
+* STM32F100xx (Medium Density VL, as on the 32VL Discovery board)
+* STM32L1xx (STM32L Discovery board)
+* STM32F407xx (STM32F4 Discovery board)
+
+Please report any and all known working combinations so I can update this!
+