tcl/str7x: Reset init unlocks the flash

[fw/openocd] / NEWS

diff --git a/NEWS b/NEWS
index a8b2b44b492ead6a27849d7a4cab7aeaee44c11f..f7bf1d313255b6e3ff55df8a0834e127f5138a62 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -13,25 +13,29 @@ Target Layer:
        General
                - new "reset-assert" event, for systems without SRST
        ARM
+               - supports "reset-assert" event (except on Cortex-M3)
                - renamed "armv4_5" command prefix as "arm"
                - recognize TrustZone "Secure Monitor" mode
                - "arm regs" command output changed
                - register names use "sp" not "r13"
                - add top-level "mcr" and "mrc" commands, replacing
                  various core-specific operations
-               - basic semihosting support
+               - basic semihosting support (ARM7/ARM9 only, for now)
        ARM11
-               - Preliminary ETM and ETB hookup
-               - accelerated "flash erase_check"
-               - accelerated GDB memory checksum
-               - support "arm regs" command
-               - can access all core modes and registers
-               - watchpoint support
+               - Should act much more like other ARM cores:
+                  * Preliminary ETM and ETB hookup
+                  * accelerated "flash erase_check"
+                  * accelerated GDB memory checksum
+                  * support "arm regs" command
+                  * can access all core modes and registers
+                  * watchpoint support
+               - Shares some core debug code with Cortex-A8
        Cortex-A8
-               - support "arm regs" command
-               - can access all core modes and registers
-               - supports "reset-assert" event (used on OMAP3530)
-               - watchpoint support
+               - Should act much more like other ARM cores:
+                  * support "arm regs" command
+                  * can access all core modes and registers
+                  * watchpoint support
+               - Shares some core debug code with ARM11
        Cortex-M3
                - Exposed DWT registers like cycle counter
                - vector_catch settings not clobbered by resets
@@ -50,8 +54,11 @@ Flash Layer:
                - <driver_name>[.N]: reference the driver's Nth bank
        New 'nand verify' command to check bank against an image file.
        The "flash erase_address" command now rejects partial sectors;
-               previously it would silently erase extra data.
+               previously it would silently erase extra data.  If you
+               want to erase the rest of the first and/or last sectors
+               instead of failing, you must pass an explicit "pad" flag.
        New at91sam9 NAND controller driver.
+       New s3c64xx NAND controller driver.
 
 Board, Target, and Interface Configuration Scripts:
        ARM9