NOR/CFI: use bus_width for memory access in cfi_write()

[fw/openocd] / NEWS

diff --git a/NEWS b/NEWS
index 924ee372abf669b77319a5d24dfe2f2c21e61920..a744da372b931149bb6bba0b1aeb3b5eb8524bfc 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -6,15 +6,22 @@ and other issues not mentioned here.
 JTAG Layer:
        New driver for "Bus Pirate"
        Rename various commands so they're not JTAG-specific
-          There are migration procedures for these, but you should
+          There are migration procedures for most of these, but you should
           convert your scripts to the new names, since those procedures
           will not be around forever.
+               jtag jinterface ... is now adapter_name
                jtag_khz        ... is now adapter_khz
                jtag_nsrst_delay ... is now adapter_nsrst_delay
+               jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
 
 Boundary Scan:
 
 Target Layer:
+       MIPS:
+               - "ejtag_srst" variant removed. The same functionality is
+                 obtained by using "reset_config none".
+               - added PIC32MX software reset support, this means srst is not
+                 required to be connected anymore.
 
 Flash Layer:
        New "stellaris recover" command, implements the procedure
@@ -22,12 +29,15 @@ Flash Layer:
                state to the factory defaults, including erasing
                the flash and its protection bits, and possibly
                re-enabling hardware debugging).
-
+       PIC32MX now uses algorithm for flash programming, this
+               has increased the performance by approx 96%.
 
 Board, Target, and Interface Configuration Scripts:
        Support IAR LPC1768 kickstart board (by Olimex)
 
 Core Jim/TCL Scripting:
+       New "add_script_search_dir" command, behaviour is the same
+               as the "-s" cmd line option.
 
 Documentation: