-Gzip 1.3.10 (200?-??-??)
+GNU gzip NEWS -*- outline -*-
+* Noteworthy changes in release ?.? (????-??-??) [?]
+
+** Bug fixes
+
+ When converting timestamps to gzip file format (32-bit unsigned) or
+ to time_t format (system-dependent), gzip now ignores out-of-range
+ values instead of shoehorning them into the destination format,
+ sometimes with undefined behavior. This affects timestamps before
+ 1970 and after 2106, and timestamps after 2038 on platforms with
+ 32-bit signed time_t. [bug present since the beginning]
+
+ Support for VMS and Amiga has been removed. It was not working anyway,
+ and it reportedly caused file name glitches on MS-Windowsish platforms.
+
+
+* Noteworthy changes in release 1.8 (2016-04-26) [stable]
+
+** Bug fixes
+
+ gzip -l no longer falsely reports a write error when writing to a pipe.
+ [bug introduced in gzip-1.7]
+
+ Port to Oracle Solaris Studio 12 on x86-64.
+ [bug present since at least gzip-1.2.4]
+
+ When configuring gzip, ./configure DEFS='...-DNO_ASM...' now
+ suppresses assembler again. [bug introduced in gzip-1.3.5]
+
+
+* Noteworthy changes in release 1.7 (2016-03-27) [stable]
+
+** Changes in behavior
+
+ The GZIP environment variable is now obsolescent; gzip now warns if
+ it is used, and rejects attempts to use dangerous options or operands.
+ You can use an alias or script instead.
+
+ Installed programs like 'zgrep' now use the PATH environment variable
+ as usual to find subsidiary programs like 'gzip' and 'grep'.
+ Previously they prepended the installation directory to the PATH,
+ which sometimes caused 'make check' to test the wrong gzip executable.
+ [bug introduced in gzip-1.3.13]
+
+** New features
+
+ gzip now accepts the --synchronous option, which causes it to use
+ fsync and similar primitives to transfer output data to the output
+ file's storage device when the file system supports this. Although
+ this option makes gzip safer in the presence of system crashes, it
+ can make gzip considerably slower.
+
+ gzip now accepts the --rsyncable option. This option is accepted in
+ all modes, but has effect only when compressing: it makes the resulting
+ output more amenable to efficient use of rsync. For example, when a
+ large input file gets a small change, a gzip --rsyncable image of
+ that file will remain largely unchanged, too. Without --rsyncable,
+ even a tiny change in the input could result in a totally different
+ gzip-compressed output file.
+
+** Bug fixes
+
+ gzip -k -v no longer reports that files are replaced.
+ [bug present since the beginning]
+
+ zgrep -f A B C no longer reads A more than once if A is not a regular file.
+ This better supports invocations like 'zgrep -f <(COMMAND) B C' in Bash.
+ [bug introduced in gzip-1.2]
+
+
+* Noteworthy changes in release 1.6 (2013-06-09) [stable]
+
+** New features
+
+ gzip now accepts the --keep (-k) option, for consistency with tools
+ like xz, lzip and bzip2. With this option, gzip no longer removes
+ named input files when compressing or decompressing.
+
+** Bug fixes
+
+ gzip -d no longer malfunctions with certain invalid data in 'pack' format.
+ [bug introduced in gzip-0.8]
+
+ When overwriting, gzip no longer acts as if you typed "y" when you type "n",
+ on some platforms when compiled with optimization.
+ [bug introduced in gzip-1.3.6]
+
+ zgrep no longer malfunctions with a multi-digit context option like -15.
+ Now, it passes that option to grep (equivalent to -C15) just as it does
+ for single-digit options. [bug introduced in gzip-1.3.12]
+
+ zmore now acts more like 'more', and is more portable to POSIXish hosts.
+
+
+* Noteworthy changes in release 1.5 (2012-06-17) [stable]
+
+** Bug fixes
+
+ gzip -d now decodes and checks header CRC16 checksums as specified by
+ the FHCRC section of Internet RFC 1952.
+
+ "gzip -d -S '' precious.gz" is now rejected immediately. Before,
+ that command would emulate "rm -i precious.gz", but with an easily-
+ misunderstood prompt. I.e., gzip would ask if it's ok to remove the
+ existing file, "precious.gz". If you made the mistake of saying "yes",
+ it would remove that input file before attempting to uncompress it.
+
+ gzip -cdf now properly handles input consisting of gzip'd data followed
+ by uncompressed data. Before it would output raw compressed input, too.
+ For example, now "(printf x|gzip; echo y)|gzip -dcf" prints "xy\n",
+ while before it would print "x<compressed data>y\n".
+
+ gzip -rf no longer compresses files more than once (e.g., replacing
+ FOO with FOO.gz.gz) on file systems such as ZFS where a readdir
+ loop that unlinks and creates files can revisit output files.
+
+
+* Noteworthy changes in release 1.4 (2010-01-20) [stable]
+
+** Bug fixes
+
+ gzip -d could segfault and/or clobber the stack, possibly leading to
+ arbitrary code execution. This affects x86_64 but not 32-bit systems.
+ This fixes CVE-2010-0001.
+ For more details, see https://bugzilla.redhat.com/554418
+
+ gzip -d would fail with a CRC error for some valid inputs.
+ So far, the only valid input known to exhibit this failure was
+ compressed "from FAT filesystem (MS-DOS, OS/2, NT)". In addition,
+ to trigger the failure, your memcpy implementation must copy in
+ the "reverse" order.
+
+
+* Noteworthy changes in release 1.3.14 (2009-10-30) [beta]
+
+** Bug fixes
+
+ gzip no longer fails when there is exactly one trailing NUL byte
+ gzip has always accepted trailing NUL bytes. Note the plural.
+
+ zdiff would exit with status 2 (indicating an error) rather than 1 to
+ indicate differences when both inputs were compressed and different.
+
+ zdiff would fail to print differences in two compressed inputs
+
+ zgrep -f - didn't work
+
+
+* Noteworthy changes in release 1.3.13 (2009-09-30) [stable]
+
+** 'gzip -f foo.gz' now creates a file foo.gz.gz instead of complaining.
+
+** Bug fixes
+
+ gzip -d no longer fails with "-" as 2nd or subsequent argument
+
+ gzip no longer ignores a close-induced write failure, e.g., on NFS
+
+ gzip -d no longer segfaults on certain invalid inputs
+
+
+Major changes in Gzip 1.3.12 (2007-04-13)
+
+* znew now uses $TMPDIR (default /tmp) instead of always using /tmp.
+
+* It is now documented that gzip ignores case when examining file name
+ extensions; for example, 'gzip test.Gz' (without -f) fails because
+ the file name ends in '.Gz'.
+
+Major changes in Gzip 1.3.11 (2007-02-05)
+
+* As per the GNU coding standards, the behavior of gzip and its
+ companion executables no longer depend on the name used to invoke them.
+ For example, 'gzip' and 'gunzip' are no longer hard links;
+ instead, 'gunzip' is now a small program that invokes 'gzip -d'.
+
+* zdiff now checks for subsidiary gzip failures, and works around
+ bugs in IRIX 6 sh, Tru64 4.0F ksh, and Solaris 8 bash.
+
+Major changes in Gzip 1.3.10 (2006-12-30)
+
+* gzip -c and zcat now work on special files, files with special mode bits,
+ and files with multiple hard links.
+* gzip -q now exits with status 2 (not 1) when SIGPIPE is received.
* zcmp and zdiff did not work in the usual case, due to a typo.
+* zgrep has many bugs fixed with argument handling, special characters,
+ and exit status.
+* zless no longer mishandles $%=~ in file names.
Gzip 1.3.9 (2006-12-15)
Major changes in Gzip 1.3.6 (2006-11-20)
-* Fix some race conditions in setting file time stamps, permissions, and owner.
+* Fix some race conditions in setting file timestamps, permissions, and owner.
* Fix some race conditions in signal handling.
* When gzip exits due to a signal, it exits with the signal's status, not 1.
-* gzip now restores file time stamps to the resolution supported by the
+* gzip now restores file timestamps to the resolution supported by the
time-setting primitives of the operating system, typically 1 microsecond.
Formerly it restored them only to the nearest second.
* gzip -r no longer attempts to reset the last-access times of directories
* With --force, let zcat pass non gzip'ed data unchanged (zcat == cat)
* Added the zgrep shell script.
* Made sub.c useful for 16 bit sound, 24 bit images, etc..
-* Supress warnings about suffix for gunzip -r, except with --verbose.
+* Suppress warnings about suffix for gunzip -r, except with --verbose.
* On MSDOS, use .gz extension when possible (files without extension)
* Moved the sample programs to a subdirectory sample.
* Added a "Special targets" section in INSTALL.
* Added comparison of zip and gzip in the readme file.
* Added small sample programs (ztouch, sub, add)
* Use less memory when compiled with -DSMALL_MEM (for MSDOS).
-* Remove the "off by more than one minute" time stamp kludge
+* Remove the "off by more than one minute" timestamp kludge
Major changes from 1.0.6 to 1.0.7.
* Allow zmore to read from standard input (like more).
on such systems.
* Added gzexe to compress rarely used executables.
* Reduce memory usage (required for MSDOS and useful on all systems).
-* Preserve time stamp in znew -P (pipe option) if touch -r works.
+* Preserve timestamp in znew -P (pipe option) if touch -r works.
Major changes from 1.0 to 1.0.1
Major changes from 0.6 to 0.7:
* Use "make check" instead of "make test".
-* Keep time stamp and pass options to gzip in znew.
+* Keep timestamp and pass options to gzip in znew.
* Do not create .z.z files with gzip -r.
* Allow again gunzip .zip files (was working in 0.5)
* Allow again compilation with TurboC 2.0 (was working in 0.4)
========================================================================
-Copyright (C) 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
+Copyright (C) 1999, 2001-2002, 2006-2007, 2009-2017 Free Software Foundation,
+Inc.
Copyright (C) 1992, 1993 Jean-loup Gailly
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.2 or
+under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts. A copy of the license is included in the ``GNU Free