-This file should include highlights of the changes made in the
-OpenOCD openocd-0.3.0 source archive release. See the repository
-history for details about what changed, including bugfixes and
-other issues not mentioned here.
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
JTAG Layer:
- FT2232H (high speed USB) support doesn't need separate configuration
- New FT2232H JTAG adapters: Amontec, Olimex, Signalyzer
- New reset_config options for SRST gating the JTAG clock (or not)
- TAP declaration no longer requires ircapture and mask attributes
- Scan chain setup should be more robust, with better diagnostics
- New TAP events:
- "post-reset" for TAP-invariant setup code (TAPs not usable yet)
- "setup" for use once TAPs are addressable (e.g. with ICEpick)
- Overridable Tcl "init_reset" and "jtag_init" procedures
- Simple "autoprobe" mechanism to help simplify server setup
+ * add debug level 4 for verbose I/O debug
+ * bitbang, add read buffer to improve performance
+ * Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver
+ * CMSIS-DAP v2 (USB bulk based) adapter driver
+ * Cypress KitProg adapter driver
+ * FTDI FT232R sync bitbang adapter driver
+ * Linux GPIOD bitbang adapter driver through libgpiod
+ * Mellanox rshim USB or PCIe adapter driver
+ * Nuvoton Nu-Link and Nu-Link2 adapter drivers
+ * NXP IMX GPIO mmap based adapter driver
+ * ST-Link consolidate all versions in single config
+ * ST-Link read properly old USB serial numbers
+ * STLink/V3 support (for ST devices only !)
+ * STM8 SWIM transport
+ * TI XDS110 adapter driver
+ * Xilinx XVC/PCIe adapter driver
Boundary Scan:
- SVF bugfixes ... parsing fixes, better STATE switch conformance
- XSVF bugfixes ... be more correct, handle Xilinx tool output
Target Layer:
- Warn on use of obsolete numeric target IDs
- New commands for use with Cortex-M3 processors:
- "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
- "cortex_m3 vector_catch" ... traps certain hardware faults
- without tying up breakpoint resources
- If you're willing to help debug it
- VERY EARLY Cortex-A8 and ARMv7A support
- Updated BeagleBoard.org hardware support
- you may need to explicitly "reset" after connect-to-Beagle
- New commands for use with XScale processors: "xscale vector_table"
- ARM
- bugfixes to single-stepping Thumb code
- ETM: unavailable registers are not listed
- ETB, ETM: report actual hardware status
- ARM9
- name change: "arm9 vector_catch" not "arm9tdmi vector_catch"
- ARM11
- single stepping support for i.MX31
- bugfix for missing "arm11" prefix on "arm11 memwrite ..."
- GDB support
- gdb_attach command is gone
+ * 64 bit address support
+ * ARCv2 target support
+ * ARM Cortex-A hypervisor mode support
+ * ARM Cortex-M fast PC sampling support for profiling
+ * ARM generic CTI support
+ * ARM generic mem-ap target support
+ * ARMv7-A MMU tools
+ * ARMv7m traces add TCP stream server
+ * ARMv8 AARCH64 target support and semihosting support
+ * ARMv8 AARCH64 disassembler support through capstone library
+ * ARMv8-M target support
+ * EnSilica eSi-RISC target support, including instruction tracing
+ eSi-Trace support
+ * MIPS64 target support
+ * Motorola SREC S6 record image file support
+ * RISC-V target support
+ * SEGGER Real Time Transfer (RTT) initial support (for single target,
+ Cortex-M only)
+ * ST STM8 target support
+ * Various MIPS32 target improvements
Flash Layer:
- The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
- New drivers:
- lpc2900, for NXP LPC2900 chips (ARM968 based)
- mx3_nand, for imx31
- New "last" flag for NOR "flash erase_sector" and "flash protect"
- The "nand erase N" command now erases all of bank N
- Speed up davinci_nand by about 3x
+ * Atheros (ath79) SPI interface support
+ * Atmel atmega128rfa1 support
+ * Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support
+ * Atmel SAMC2?N* support
+ * Cypress PSoC5LP, PSoC6 support
+ * EnSilica eSi-RISC support
+ * Foshan Synwit Tech SWM050 support
+ * Maxim Integrated MAX32XXX support
+ * Nordic Semiconductor nRF51822, nRF52810, nRF52832 support
+ * NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support
+ * Renesas RPC HF support
+ * SH QSPI support
+ * SiFive Freedom E support
+ * Silicon Labs EFR-family, EZR32HG support
+ * ST BlueNRG support
+ * ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM
+ * ST STM32F72x, STM32F4x3, STM32H7xx support
+ * ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support
+ * ST STM32L5x support (non secure mode)
+ * TI CC13xx, CC26xx, CC32xx support
+ * TI MSP432 support
+ * Winner Micro w600 support
+ * Xilinx XCF platform support
+ * Various discrete SPI NOR flashes support
Board, Target, and Interface Configuration Scripts:
- Amontec JTAGkey2 support
- Cleanup and additions for the TI/Luminary Stellaris scripts
- LPC1768 target (and flash) support
- Keil MCB1700 eval board
- Samsung s3c2450
- Mini2440 board
- Numeric TAP and Target identifiers now trigger warnings
- PXA255 partially enumerates
+ * 8devices LIMA board config
+ * Achilles Instant-Development Kit Arria 10 board config
+ * Amazon Kindle 2 and DX board config
+ * Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config
+ * Andes Technology ADP-XC7KFF676 board config
+ * Andes Technology Corvette-F1 board config
+ * ARM Musca A board config
+ * Arty Spartan 7 FPGA board config
+ * Atmel SAMD10 Xplained mini board config
+ * Atmel SAMD11 Xplained Pro board config
+ * Atmel SAM G55 Xplained Pro board config
+ * AVNET UltraZED EG StarterKit board config
+ * Blue Pill STM32F103C8 board config
+ * DP Busblaster v4.1a board config
+ * DPTechnics DPT-Board-v1 board config
+ * Emcraft imx8 SOM BSB board config
+ * Globalscale ESPRESSObin board config
+ * Kasli board config
+ * Kintex Ultrascale XCKU040 board config
+ * Knovative KC-100 board config
+ * LeMaker HiKey board config
+ * Microchip (Atmel) SAME54 Xplained Pro board config
+ * Microchip (Atmel) SAML11 Xplained Pro board config
+ * Nordic module NRF52 board config
+ * Numato Lab Mimas A7 board config
+ * NXP Freedom FRDM-LS1012A board config
+ * NXP IMX7SABRE board config
+ * NXP IMX8MP-EVK board config
+ * NXP MC-IMX8M-EVK board config
+ * QuickLogic QuickFeather board config
+ * Renesas R-Car E2, H2, M2 board config
+ * Renesas R-Car Salvator-X(S) board config
+ * Renesas RZ/A1H GR-Peach board config
+ * Rigado BMD-300 board config
+ * Sayma AMC board config
+ * Sifive e31arty, e51arty, hifive1 board config
+ * ST B-L475E-IOT01A board config
+ * ST BlueNRG idb007v1, idb008v1, idb011v1 board config
+ * ST STM32F412g discovery board config
+ * ST STM32F413h discovery board config
+ * ST STM32F469i discovery board config
+ * ST STM32F7 Nucleo board config
+ * ST STM32F723e discovery board config
+ * ST STM32F746g discovery board config
+ * ST STM32F769i discovery board config
+ * ST STM32H735g discovery board config
+ * ST STM32H743zi Nucleo board config
+ * ST STM32H745i discovery board config
+ * ST STM32H747i discovery board config
+ * ST STM32H750b discovery board config
+ * ST STM32H7b3i discovery board config
+ * ST STM32H7x_dual_qspi board config
+ * ST STM32H7x3i Eval boards config
+ * ST STM32L073 Nucleo board config
+ * ST STM32L476g discovery board config
+ * ST STM32L496g discovery board config
+ * ST STM32L4p5g discovery board config
+ * ST STM32L4r9i discovery board config
+ * ST STM32L5 Nucleo board config
+ * ST STM32MP15x DK2 board config
+ * ST STM32WB Nucleo board config
+ * ST STM8L152R8 Nucleo board config
+ * Synopsys DesignWare ARC EM board config
+ * Synopsys DesignWare ARC HSDK board config
+ * TI BeagleBone family boards config
+ * TI CC13xx, CC26xx, CC32xx LaunchPad board config
+ * TI MSP432 LaunchPad board config
+ * Tocoding Poplar board config
+ * TP-Link WDR4300 board config
+ * Allwinner V3s target config
+ * Andes Technology NDS V5 target config
+ * Atmel atmega128rfa1 target config
+ * ARM corelink SSE-200 target config
+ * Atheros_ar9344 target config
+ * Cypress PSoC5LP, PSoC6 target config
+ * EnSilica eSi-RISC target config
+ * Foshan Synwit Tech SWM050 target config
+ * GigaDevice GD32VF103 target config
+ * Hisilicon Hi3798 target config
+ * Hisilicon Hi6220 target config
+ * Infineon TLE987x target config
+ * Marvell Armada 3700 target config
+ * Maxim Integrated MAX32XXX target config
+ * Mellanox BlueField target config
+ * Microchip (Atmel) SAME5x, SAML1x target config
+ * NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config
+ * NXP Kinetis KE1xZ, KE1xF target config
+ * NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config
+ * Qualcomm QCA4531 target config
+ * QuickLogic EOS S3 target config
+ * Renesas R-Car E2, H2, M2 target config
+ * Renesas R-Car Gen3 target config
+ * Renesas RZ/A1H target config
+ * Rockchip RK3308 target config
+ * ST BlueNRG target config
+ * ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config
+ * ST STM32MP15x target config
+ * ST STM32WBx, STM32WLEx target config
+ * ST STM8L152, S003, S103, S105 target config
+ * Synopsys DesignWare ARC EM target config
+ * Synopsys DesignWare ARC HS Development Kit SoC target config
+ * TI CC13xx, CC26xx, CC32xx target config
+ * TI TNETC4401 target config
+ * Xilinx UltraScale+ target config
+ * Altera 5M570Z (MAXV family) CPLD config
+ * Xilinx Ultrascale, XCF CPLD config
+ * Intel (Altera) Arria10 FPGA config
+ * Cadence SystemVerilog Direct Programming Interface (DPI) interface config
+ * Cypress KitProg interface config
+ * Digilent SMT2 NC interface config
+ * DLN-2 example of Linux GPIOD interface config
+ * FTDI C232HM interface config
+ * HIE JTAG Debugger interface config
+ * In-Circuit's ICprog interface config
+ * isodebug isolated JTAG/SWD+UART interface config
+ * Mellanox rshim USB or PCIe interface config
+ * Nuvoton Nu-Link interface config
+ * NXP IMX GPIO mmap based interface config
+ * Steppenprobe open hardware interface config
+ * TI XDS110 interface config
+
+Server Layer:
+ * 64 bit address support
+ * default bind to IPv4 localhost
+ * gdb: allow multiple connections
+ * gdb: architecture element support
+ * gdb: vCont, vRun support
+ * telnet: handle Ctrl+A, Ctrl+E and Ctrl+K
+
+RTOS:
+ * Chromium-EC rtos support
+ * hwthread pseudo rtos support
+ * NuttX rtos support
+ * RIOT rtos support
Documentation:
- Capture more debugging and setup advice
- Notes on target source code changes that may help debugging
+ * Improve STM32 flash driver
+ * Various typo fix and improvements
Build and Release:
- Clean builds on (32-bit) Cygwin
- Clean builds on 64-bit MinGW
+ * Add libutil to support jimtcl version 0.80
+ * Clang warning fixes
+ * GitHub workflow for Win32 snapshot binaries
+ * Handle Tcl return values consistently
+ * Mitigation for CVE-2018-5704: Prevent some forms of Cross
+ Protocol Scripting attacks
+ * Support for libftdi 1.5
+ * Travis-CI basic support
+ * Update libjaylink to version 0.2.0
+ * Update jimtcl to version 0.79
+ * Use external (optional) library capstone for ARM and AARCH64 disassembly
+
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.11.0/log/?path=
+
-For more details about what has changed since the last release,
-see the ChangeLog associated with this source archive. For older NEWS,
-see the NEWS files associated with each release (i.e. NEWS-<version>).
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
For more information about contributing test reports, bug fixes, or new
features and device support, please read the new Developer Manual (or
-the BUGS and PATCHES files in the source archive).
+the BUGS and PATCHES.txt files in the source archive).
projects / fw / openocd / blobdiff