ARM: rename "arm9tdmi vector_catch" to "arm9 ..."

[fw/openocd] / NEWS

diff --git a/NEWS b/NEWS
index a16079a1138501ca03bdbfbb8f5a3f21a26d5252..436dab7da417481ef352c32797b5f17d4bf001d7 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -1,13 +1,52 @@
-This file should include items worth mentioning in the
-OpenOCD openocd-0.2.0 source archive release.
-
-The following areas of OpenOCD functionality changed in this release:
+This file should include highlights of the changes made in the
+OpenOCD openocd-0.3.0 source archive release.  See the repository
+history for details about what changed, including bugfixes and
+other issues not mentioned here.
 
 JTAG Layer:
+    FT2232H (high speed USB) support doesn't need separate configuration
+    New reset_config options for SRST gating the JTAG clock (or not)
+    TAP declaration no longer requires ircapture and mask attributes
+    New "post-reset" event handler for TAP-invariant setup code
+    Overridable Tcl "init_reset" and "jtag_init" procedures
+
 Target Layer:
+    New commands for use with Cortex-M3 processors:
+       "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
+       "cortex_m3 vector_catch" ... traps certain hardware faults
+               without tying up breakpoint resources
+    If you're willing to help debug it
+       VERY EARLY Cortex-A8 and ARMv7A support
+       Updated BeagleBoard.org hardware support
+    New commands for use with XScale processors: "xscale vector_table"
+    ARM9
+       name change:  "arm9 vector_catch" not "arm9tdmi vector_catch"
+    ARM11
+       single stepping support for i.MX31
+       bugfix for missing "arm11" prefix on "arm11 memwrite ..."
+    ETM support
+       Unavailable registers are not listed
+
 Flash Layer:
+    The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
+    New lpc2900 driver for NXP LPC2900 chips (ARM968 based)
+    New "last" flag for NOR "flash erase_sector" and "flash protect"
+    The "nand erase N" command now erases all of bank N
+
 Board, Target, and Interface Configuration Scripts:
+    Amontec JTAGkey2 support
+    Cleanup and additions for the TI/Luminary Stellaris scripts
+    LPC1768 target (and flash) support
+       Keil MCB1700 eval board
+    Samsung s3c2450
+       Mini2440 board
+    Numeric TAP and Target identifiers now trigger warnings
+    PXA255 partially enumerates
+
 Documentation:
+    Capture more debugging and setup advice
+    Notes on target source code changes that may help debugging
+
 Build and Release:
 
 For more details about what has changed since the last release,