-This file should include highlights of the changes made in the
-OpenOCD openocd-0.3.0 source archive release. See the repository
-history for details about what changed, including bugfixes and
-other issues not mentioned here.
+This file includes highlights of the changes made in the
+OpenOCD 0.4.0 source archive release. See the repository
+history for details about what changed, including bugfixes
+and other issues not mentioned here.
JTAG Layer:
- FT2232H (high speed USB) support doesn't need separate configuration
+ Support KT-Link JTAG adapter.
+Boundary Scan:
Target Layer:
- New commands for use with Cortex-M3 processors:
- "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
- "cortex_m3 vector_catch" ... traps certain hardware faults
- without tying up breakpoint resources
- If you're willing to help debug it: VERY EARLY Cortex-A8 support
- New commands for use with XScale processors: "xscale vector_table"
+ General
+ - new "reset-assert" event, for systems without SRST
+ ARM
+ - renamed "armv4_5" command prefix as "arm"
+ - recognize TrustZone "Secure Monitor" mode
+ - "arm regs" command output changed
+ - register names use "sp" not "r13"
+ - add top-level "mcr" and "mrc" commands, replacing
+ various core-specific operations
+ ARM11
+ - Preliminary ETM and ETB hookup
+ - accelerated "flash erase_check"
+ - accelerated GDB memory checksum
+ - support "arm regs" command
+ - can access all core modes and registers
+ Cortex-A8
+ - support "arm regs" command
+ - can access all core modes and registers
+ - supports "reset-assert" event (used on OMAP3530)
+ Cortex-M3
+ - Exposed DWT registers like cycle counter
Flash Layer:
- The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
+ 'flash bank' and 'nand device' take <bank_name> as first argument.
+ With this, flash/NAND commands allow referencing banks by name:
+ - <bank_name>: reference the bank with its defined name
+ - <driver_name>[.N]: reference the driver's Nth bank
+ New 'nand verify' command to check bank against an image file.
Board, Target, and Interface Configuration Scripts:
- Cleanup and additions for the TI/Luminary Stellaris scripts
- LPC1768 target (and flash) support
- Keil MCB1700 eval board
- Samsung s3c2450
- Mini2440 board
+ ARM9
+ - ETM and ETB hookup for iMX2* targets
+ Add $HOME/.openocd to the search path.
+
+Core Jim/TCL Scripting:
+ New 'usage' command to provide terse command help.
+ Improved command 'help' command output (sorted and indented).
+ Improved command handling:
+ - Most boolean settings now accept any of the following:
+ on/off, enable/disable, true/false, yes/no, 1/0
+ - More error checking and reporting.
Documentation:
+ New built-in command development documentation and primer.
Build and Release:
+ Use --enable-doxygen-pdf to build PDF developer documentation.
For more details about what has changed since the last release,
-see the ChangeLog associated with this source archive. For older NEWS,
-see the NEWS files associated with each release (i.e. NEWS-<version>).
+see the git repository history. With gitweb, you can browse that
+in various levels of detail.
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
For more information about contributing test reports, bug fixes, or new
features and device support, please read the new Developer Manual (or
projects / fw / openocd / blobdiff