-# Makefile.in generated by automake 1.8.4 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
+# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = @build@
host_triplet = @host@
+target_triplet = @target@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pkgdatadir)"
pkgdataDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgdata_DATA)
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = config common-src client-src tape-src server-src \
- changer-src restore-src recover-src amplot man docs example
+DIST_SUBDIRS = config common-src amandad-src tape-src client-src \
+ dumper-src server-src changer-src restore-src recover-src \
+ oldrecover-src amplot man docs example
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
AMANDA_TMPDIR = @AMANDA_TMPDIR@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
+AMLINT = @AMLINT@
+AMLINTFLAGS = @AMLINTFLAGS@
AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
AMTAR = @AMTAR@
+AM_CFLAGS = @AM_CFLAGS@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AWK = @AWK@
AWK_VAR_ASSIGNMENT_OPT = @AWK_VAR_ASSIGNMENT_OPT@
BINARY_OWNER = @BINARY_OWNER@
+BUILD_MAN_PAGES_FALSE = @BUILD_MAN_PAGES_FALSE@
+BUILD_MAN_PAGES_TRUE = @BUILD_MAN_PAGES_TRUE@
CAT = @CAT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DOC_BUILD_DATE = @DOC_BUILD_DATE@
DUMP = @DUMP@
+DUMPER_DIR = @DUMPER_DIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
GETCONF = @GETCONF@
GNUPLOT = @GNUPLOT@
GNUTAR = @GNUTAR@
+GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
GNUTAR_LISTED_INCREMENTAL_DIRX = @GNUTAR_LISTED_INCREMENTAL_DIRX@
GREP = @GREP@
GZIP = @GZIP@
+HAVE_XSLTPROC_FALSE = @HAVE_XSLTPROC_FALSE@
+HAVE_XSLTPROC_TRUE = @HAVE_XSLTPROC_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LL_FMT = @LL_FMT@
LN_S = @LN_S@
LTALLOCA = @LTALLOCA@
LTLIBOBJS = @LTLIBOBJS@
WANT_SERVER_TRUE = @WANT_SERVER_TRUE@
WANT_SETUID_CLIENT_FALSE = @WANT_SETUID_CLIENT_FALSE@
WANT_SETUID_CLIENT_TRUE = @WANT_SETUID_CLIENT_TRUE@
+WANT_SSH_SECURITY_FALSE = @WANT_SSH_SECURITY_FALSE@
+WANT_SSH_SECURITY_TRUE = @WANT_SSH_SECURITY_TRUE@
WANT_TAPE_FALSE = @WANT_TAPE_FALSE@
WANT_TAPE_TRUE = @WANT_TAPE_TRUE@
XFSDUMP = @XFSDUMP@
XFSRESTORE = @XFSRESTORE@
+XSLTPROC = @XSLTPROC@
YACC = @YACC@
ac_c = @ac_c@
ac_ct_AR = @ac_ct_AR@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
ACINCLUDE_M4I = $(srcdir)/config/acinclude.m4i
LIBTOOL_M4I = $(srcdir)/config/libtool.m4i
ACINCLUDE_M4_DEPS = $(ACINCLUDE_M4I) $(LIBTOOL_M4I)
-@WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src
+@WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src dumper-src
@WANT_TAPE_TRUE@TAPE_SUBDIRS = tape-src
@WANT_SERVER_TRUE@SERVER_SUBDIRS = server-src changer-src
@WANT_RESTORE_TRUE@RESTORE_SUBDIRS = restore-src
-@WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src
+@WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src oldrecover-src
@WANT_AMPLOT_TRUE@PLOT_SUBDIRS = amplot
# order is significant, don't change it arbitrarily
SUBDIRS = \
config \
common-src \
- $(CLIENT_SUBDIRS) \
+ amandad-src \
$(TAPE_SUBDIRS) \
+ $(CLIENT_SUBDIRS) \
$(SERVER_SUBDIRS) \
$(RESTORE_SUBDIRS) \
$(RECOVER_SUBDIRS) \
man docs example
pkgdata_DATA = \
+ ReleaseNotes \
COPYRIGHT \
COPYRIGHT-APACHE \
COPYRIGHT-REGEX
EXTRA_DIST = $(SNAPSHOT_STAMP) \
$(pkgdata_DATA) \
+ autogen \
contrib/README \
contrib/dbbackup.README \
contrib/dbbackup.ksh \
contrib/sst/sst.conf \
contrib/sst/sst_def.h \
contrib/sst/sstest.c \
+ contrib/gsc/README \
+ contrib/gsc/cfggsc.c \
+ contrib/gsc/defgsc.c \
+ contrib/gsc/gsc.add \
+ contrib/gsc/gscdd.c \
+ contrib/gsc/gscdds.h \
+ contrib/gsc/makefile \
+ contrib/gsc/tstinq.c \
+ contrib/gsc/ucfggsc.c \
patches/regex-3.6alpha.patch \
patches/samba-largefs.patch \
patches/tar-1.12.patch \
test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
@list='$(pkgdata_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
+ f=$(am__strip_dir) \
echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
$(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
done
uninstall-pkgdataDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgdata_DATA)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
+ f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
done
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ || eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ || eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && \
+ test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -z "$$unique" && unique=$$empty_fix; \
+ test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
- $(mkdir_p) $(distdir)/amplot $(distdir)/changer-src $(distdir)/client-src $(distdir)/common-src $(distdir)/contrib $(distdir)/contrib/sst $(distdir)/example $(distdir)/patches $(distdir)/regex-src $(distdir)/regex-src/fake $(distdir)/server-src
+ $(mkdir_p) $(distdir)/amplot $(distdir)/changer-src $(distdir)/client-src $(distdir)/common-src $(distdir)/contrib $(distdir)/contrib/gsc $(distdir)/contrib/sst $(distdir)/dumper-src $(distdir)/example $(distdir)/patches $(distdir)/regex-src $(distdir)/regex-src/fake $(distdir)/server-src
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || mkdir "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="../$(top_distdir)" \
- distdir="../$(distdir)/$$subdir" \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
- $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
- $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
$(am__remove_distdir)
dist dist-all: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
clean-generic:
distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-libtool clean-recursive \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-shar dist-tarZ dist-zip distcheck distclean \
+ dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-libtool distclean-recursive \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
SNAPSHOT:
: SNAPSHOT file was removed, will reconfigure...
+lint:
+ (cd amandad-src; make lint)
+ (cd changer-src; make lint)
+ (cd client-src; make lint)
+ (cd common-src; make lint)
+ (cd oldrecover-src; make lint)
+ (cd recover-src; make lint)
+ (cd regex-src; make lint)
+ (cd restore-src; make lint)
+ (cd server-src; make lint)
+ (cd tape-src; make lint)
+
dist-hook:
find $(distdir)/. -name '*.test.c' -exec rm {} \;
# Tell versions [3.59,3.63) of GNU make to not export all variables.