This is a small, baro-only recording dual-deploy altimeter for
model rocketry
-EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web
-store, and should be available from our distributors soon.
+EasyMini version 2.0 is available from the
+[Garbee and Garbee](https://shop.gag.com) web store
+and from our distributors.
-For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site. EasyMini requires AltOS
-version 1.3 or later.
+For the latest EasyMini firmware and related ground station software,
+please visit the [AltOS](../AltOS) page on this site. EasyMini
+version 2.0 requires AltOS version 1.8.4 or later.
These are photos of version 2.0:
-<a href="v2.0/easymini-top.jpg"> <img src="v2.0/easymini-top-thumb.jpg"></a>
-<a href="v2.0/easymini-bottom.jpg"> <img src="v2.0/easymini-bottom-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-top.jpg"> <img src="v2.0/easymini-v2.0-top-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-bottom.jpg"> <img src="v2.0/easymini-v2.0-bottom-thumb.jpg"></a>
## Features ##
### Developer View ###
* Hardware Features
- * [STM32F042])http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
+ * [STM32F042](http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
* ARM Cortex-M0 MCU
* 32k Flash
* 6k RAM
[pdf](../AltOS/doc/altusmetrum.pdf) formats
An outline of the board with drill hole locations is available in
-[pdf](../Documents/easymini-outline.pdf) format.
+[pdf](../AltOS/doc/easymini-outline.pdf) format.
Thanks to Bryan Duke, there's also a 3d model of EasyMini available on
[Thingiverse](http://www.thingiverse.com/thing:1946852).