projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl/target: add SPDX tag
[fw/openocd]
/
tcl
/
target
/
str750.cfg
diff --git
a/tcl/target/str750.cfg
b/tcl/target/str750.cfg
index 2fabc126e49d745dc62c8115293285a861dff49f..5af7b74a701350fde484d6f23115bbd983852e09 100644
(file)
--- a/
tcl/target/str750.cfg
+++ b/
tcl/target/str750.cfg
@@
-1,25
+1,27
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
#STR750 CPU
if { [info exists CHIPNAME] } {
#STR750 CPU
if { [info exists CHIPNAME] } {
- set
_CHIPNAME $CHIPNAME
+ set _CHIPNAME $CHIPNAME
} else {
} else {
- set
_CHIPNAME str750
+ set _CHIPNAME str750
}
if { [info exists ENDIAN] } {
}
if { [info exists ENDIAN] } {
- set
_ENDIAN $ENDIAN
+ set _ENDIAN $ENDIAN
} else {
} else {
- set
_ENDIAN little
+ set _ENDIAN little
}
if { [info exists CPUTAPID] } {
}
if { [info exists CPUTAPID] } {
- set
_CPUTAPID $CPUTAPID
+ set _CPUTAPID $CPUTAPID
} else {
} else {
- set
_CPUTAPID 0x4f1f0041
+ set _CPUTAPID 0x4f1f0041
}
# jtag speed
}
# jtag speed
-adapter
_khz
10
+adapter
speed
10
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
@@
-29,15
+31,15
@@
reset_config trst_and_srst srst_pulls_trst
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
#jtag nTRST and nSRST delay
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
#jtag nTRST and nSRST delay
-adapter
_nsrst_
delay 500
+adapter
srst
delay 500
jtag_ntrst_delay 500
set _TARGETNAME $_CHIPNAME.cpu
jtag_ntrst_delay 500
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
-variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
-$_TARGETNAME configure -event reset-start
{ adapter_khz
10 }
+$_TARGETNAME configure -event reset-start
{ adapter speed
10 }
$_TARGETNAME configure -event reset-init {
$_TARGETNAME configure -event reset-init {
- adapter
_khz
3000
+ adapter
speed
3000
init_smi
# Because the hardware cannot be interrogated for the protection state
init_smi
# Because the hardware cannot be interrogated for the protection state
@@
-61,7
+63,7
@@
flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 $_TARGETNAME STR75x
# Serial NOR on SMI CS0.
set _FLASHNAME $_CHIPNAME.snor
# Serial NOR on SMI CS0.
set _FLASHNAME $_CHIPNAME.snor
-flash bank $_FLASHNAME s
pear
smi 0x80000000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME s
tm
smi 0x80000000 0 0 0 $_TARGETNAME
source [find mem_helper.tcl]
source [find mem_helper.tcl]