projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
jtag/cmsis_dap: switch to command 'adapter serial'
[fw/openocd]
/
tcl
/
target
/
stm8s.cfg
diff --git
a/tcl/target/stm8s.cfg
b/tcl/target/stm8s.cfg
index 4768068e820e8410184e3fc596fcd92d65d59cca..2dae6551571051e6f2724b0474e6e96cb1347496 100644
(file)
--- a/
tcl/target/stm8s.cfg
+++ b/
tcl/target/stm8s.cfg
@@
-4,7
+4,7
@@
# stm8 devices support SWIM transports only.
#
# stm8 devices support SWIM transports only.
#
-transport select s
tlink_s
wim
+transport select swim
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
@@
-62,7
+62,7
@@
if { [info exists BLOCKSIZE] } {
set _BLOCKSIZE 0x80
}
set _BLOCKSIZE 0x80
}
-hla newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0
+swim newtap $_CHIPNAME cpu
set _TARGETNAME $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
@@
-75,8
+75,10
@@
$_TARGETNAME configure -optionstart $_OPTIONSTART -optionend $_OPTIONEND -blocks
# Uncomment this line to enable interrupts while instruction step
#$_TARGETNAME configure -enable_step_irq
# Uncomment this line to enable interrupts while instruction step
#$_TARGETNAME configure -enable_step_irq
-# The khz rate does not apply here, only slow <0> and fast <1>
-adapter speed 1
+# Set high speed
+adapter speed 800
+# Set low speed
+#adapter speed 363
reset_config srst_only
reset_config srst_only