projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl/target: replace event trace-config
[fw/openocd]
/
tcl
/
target
/
stm32wbx.cfg
diff --git
a/tcl/target/stm32wbx.cfg
b/tcl/target/stm32wbx.cfg
index 138bcf186bba999dd33d749fa86d0063e4e951ed..737b1447c04275624315d5e857f8c5dda6fe34af 100644
(file)
--- a/
tcl/target/stm32wbx.cfg
+++ b/
tcl/target/stm32wbx.cfg
@@
-1,3
+1,5
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
# script for stm32wbx family
#
# script for stm32wbx family
#
@@
-46,8
+48,8
@@
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_
FLASHNAME stm32l4x
0 0 0 0 $_TARGETNAME
+flash bank $_CHIPNAME.flash stm32l4x 0x08000000 0 0 0 $_TARGETNAME
+flash bank $_
CHIPNAME.otp stm32l4x 0x1fff700
0 0 0 0 $_TARGETNAME
# Common knowledges tells JTAG speed should be <= F_CPU/6.
# F_CPU after reset is MSI 4MHz, so use F_JTAG = 500 kHz to stay on
# Common knowledges tells JTAG speed should be <= F_CPU/6.
# F_CPU after reset is MSI 4MHz, so use F_JTAG = 500 kHz to stay on
@@
-55,9
+57,9
@@
flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME
#
# Note that there is a pretty wide band where things are
# more or less stable, see http://openocd.zylin.com/#/c/3366/
#
# Note that there is a pretty wide band where things are
# more or less stable, see http://openocd.zylin.com/#/c/3366/
-adapter
_khz
500
+adapter
speed
500
-adapter
_nsrst_
delay 100
+adapter
srst
delay 100
if {[using_jtag]} {
jtag_ntrst_delay 100
}
if {[using_jtag]} {
jtag_ntrst_delay 100
}
@@
-77,12
+79,12
@@
$_TARGETNAME configure -event reset-init {
mmw 0x58004000 0x00000102 0 ;# FLASH_ACR |= PRFTBE | 2(Latency)
mmw 0x58000000 0x00000091 0 ;# RCC_CR = MSI_ON | MSI Range 24 MHz
# Boost JTAG frequency
mmw 0x58004000 0x00000102 0 ;# FLASH_ACR |= PRFTBE | 2(Latency)
mmw 0x58000000 0x00000091 0 ;# RCC_CR = MSI_ON | MSI Range 24 MHz
# Boost JTAG frequency
- adapter
_khz
4000
+ adapter
speed
4000
}
$_TARGETNAME configure -event reset-start {
# Reset clock is MSI (4 MHz)
}
$_TARGETNAME configure -event reset-start {
# Reset clock is MSI (4 MHz)
- adapter
_khz
500
+ adapter
speed
500
}
$_TARGETNAME configure -event examine-end {
}
$_TARGETNAME configure -event examine-end {
@@
-95,9
+97,16
@@
$_TARGETNAME configure -event examine-end {
mmw 0xE004203C 0x00001800 0
}
mmw 0xE004203C 0x00001800 0
}
-$_TARGETNAME configure -event trace-config {
+tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
+
+lappend _telnet_autocomplete_skip _proc_pre_enable_$_CHIPNAME.tpiu
+proc _proc_pre_enable_$_CHIPNAME.tpiu {_targetname} {
+ targets $_targetname
+
# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
# change this value accordingly to configure trace pins
# assignment
mmw 0xE0042004 0x00000020 0
}
# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
# change this value accordingly to configure trace pins
# assignment
mmw 0xE0042004 0x00000020 0
}
+
+$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_TARGETNAME"