projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
drivers/bcm2835gpio: Migrate to adapter gpio commands
[fw/openocd]
/
tcl
/
target
/
samsung_s3c6410.cfg
diff --git
a/tcl/target/samsung_s3c6410.cfg
b/tcl/target/samsung_s3c6410.cfg
index e451fd64a60e59b015cd8073190e93b2f4e00cf9..c1574587b8603f26e3ee4534f19dca1ebc48d4fb 100644
(file)
--- a/
tcl/target/samsung_s3c6410.cfg
+++ b/
tcl/target/samsung_s3c6410.cfg
@@
-1,3
+1,5
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
# -*- tcl -*-
# Target configuration for the Samsung s3c6410 system on chip
# Tested on a SMDK6410
# -*- tcl -*-
# Target configuration for the Samsung s3c6410 system on chip
# Tested on a SMDK6410
@@
-7,43
+9,45
@@
# [and I do not believe it to be accurate, hence the 0xffffffff below]
if { [info exists CHIPNAME] } {
# [and I do not believe it to be accurate, hence the 0xffffffff below]
if { [info exists CHIPNAME] } {
- set
_CHIPNAME $CHIPNAME
+ set _CHIPNAME $CHIPNAME
} else {
} else {
- set
_CHIPNAME s3c6410
+ set _CHIPNAME s3c6410
}
if { [info exists ENDIAN] } {
}
if { [info exists ENDIAN] } {
- set
_ENDIAN $ENDIAN
+ set _ENDIAN $ENDIAN
} else {
# this defaults to a bigendian
} else {
# this defaults to a bigendian
- set
_ENDIAN little
+ set _ENDIAN little
}
# trace buffer
}
# trace buffer
-if { [info exists ETBTAPID
] } {
+if { [info exists ETBTAPID] } {
set _ETBTAPID $ETBTAPID
} else {
set _ETBTAPID $ETBTAPID
} else {
- # force an error till we get a good number
set _ETBTAPID 0x2b900f0f
}
set _ETBTAPID 0x2b900f0f
}
-if { [info exists CPUTAPID
] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID $CPUTAPID
} else {
- # force an error till we get a good number
set _CPUTAPID 0x07b76f0f
}
#jtag scan chain
jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETBTAPID
set _CPUTAPID 0x07b76f0f
}
#jtag scan chain
jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETBTAPID
-jtag newtap $_CHIPNAME cpu
-irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm11 -endian $_ENDIAN
-chain-position $_TARGETNAME -variant arm1176
+target create $_TARGETNAME arm11 -endian $_ENDIAN
-chain-position $_TARGETNAME
-
jtag_nsrst_
delay 500
+
adapter srst
delay 500
jtag_ntrst_delay 500
#reset configuration
reset_config trst_and_srst
jtag_ntrst_delay 500
#reset configuration
reset_config trst_and_srst
+
+# trace setup ... NOTE, "normal full" mode fudges the real ETMv3.1 mode
+etm config $_TARGETNAME 16 normal full etb
+etb config $_TARGETNAME $_CHIPNAME.etb