projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl/target: add SPDX tag
[fw/openocd]
/
tcl
/
target
/
samsung_s3c2410.cfg
diff --git
a/tcl/target/samsung_s3c2410.cfg
b/tcl/target/samsung_s3c2410.cfg
index 73d3b50039182dbf1c71323febb3b9e897d45e3e..5a04871f269a783e7ba90256ca3ab7b0256c264a 100644
(file)
--- a/
tcl/target/samsung_s3c2410.cfg
+++ b/
tcl/target/samsung_s3c2410.cfg
@@
-1,23
+1,25
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
# Found on the 'TinCanTools' Hammer board.
if { [info exists CHIPNAME] } {
# Found on the 'TinCanTools' Hammer board.
if { [info exists CHIPNAME] } {
- set
_CHIPNAME $CHIPNAME
+ set _CHIPNAME $CHIPNAME
} else {
} else {
- set
_CHIPNAME s3c2410
+ set _CHIPNAME s3c2410
}
if { [info exists ENDIAN] } {
}
if { [info exists ENDIAN] } {
- set
_ENDIAN $ENDIAN
+ set _ENDIAN $ENDIAN
} else {
# This config file was defaulting to big endian..
} else {
# This config file was defaulting to big endian..
- set
_ENDIAN little
+ set _ENDIAN little
}
if { [info exists CPUTAPID] } {
}
if { [info exists CPUTAPID] } {
- set
_CPUTAPID $CPUTAPID
+ set _CPUTAPID $CPUTAPID
} else {
# Force an error until we get a good number.
} else {
# Force an error until we get a good number.
- set
_CPUTAPID 0xffffffff
+ set _CPUTAPID 0xffffffff
}
#use combined on interfaces or targets that cannot set TRST/SRST separately
}
#use combined on interfaces or targets that cannot set TRST/SRST separately
@@
-27,7
+29,7
@@
reset_config trst_and_srst
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
-variant arm920t
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0