projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl/target/stm32l4x: set default WORKAREASIZE to smallest device
[fw/openocd]
/
tcl
/
target
/
samsung_s3c2410.cfg
diff --git
a/tcl/target/samsung_s3c2410.cfg
b/tcl/target/samsung_s3c2410.cfg
index 6dca7efd3de98681b1c9521a37af6a39381dfc5d..017c104927e25ac31e5bd64fa3e331d236630923 100644
(file)
--- a/
tcl/target/samsung_s3c2410.cfg
+++ b/
tcl/target/samsung_s3c2410.cfg
@@
-1,22
+1,23
@@
# Found on the 'TinCanTools' Hammer board.
# Found on the 'TinCanTools' Hammer board.
-if { [info exists CHIPNAME] } {
- set
_CHIPNAME $CHIPNAME
-} else {
- set
_CHIPNAME s3c2410
+if { [info exists CHIPNAME] } {
+ set
_CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME s3c2410
}
}
-if { [info exists ENDIAN] } {
- set
_ENDIAN $ENDIAN
-} else {
+if { [info exists ENDIAN] } {
+ set
_ENDIAN $ENDIAN
+} else {
# This config file was defaulting to big endian..
# This config file was defaulting to big endian..
- set
_ENDIAN little
+ set _ENDIAN little
}
}
-if { [info exists CPUTAPID] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0xffffffff
+if { [info exists CPUTAPID] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # Force an error until we get a good number.
+ set _CPUTAPID 0xffffffff
}
#use combined on interfaces or targets that cannot set TRST/SRST separately
}
#use combined on interfaces or targets that cannot set TRST/SRST separately
@@
-26,9
+27,9
@@
reset_config trst_and_srst
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
-variant arm920t
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
-$_TARGETNAME configure -work-area-
virt 0 -work-area-
phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
# speed up memory downloads
arm7_9 fast_memory_access enable
# speed up memory downloads
arm7_9 fast_memory_access enable