projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl/target: add SPDX tag
[fw/openocd]
/
tcl
/
target
/
fm3.cfg
diff --git
a/tcl/target/fm3.cfg
b/tcl/target/fm3.cfg
index 74a4e278b68ccd8d4c7d0cefc5a6f6c53838a698..0caf629da4a061e39c8d21d5d28c6cb3a0ab937d 100644
(file)
--- a/
tcl/target/fm3.cfg
+++ b/
tcl/target/fm3.cfg
@@
-1,6
+1,10
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
# MB9BF506
# Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM
# MB9BF506
# Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM
+source [find target/swj-dp.tcl]
+
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
@@
-20,28
+24,33
@@
if { [info exists CPUTAPID] } {
}
# delays on reset lines
}
# delays on reset lines
-adapter_nsrst_delay 100
-jtag_ntrst_delay 100
+adapter srst delay 100
+if {[using_jtag]} {
+ jtag_ntrst_delay 100
+}
-# Fujitsu
c
ortex-M3 reset configuration
+# Fujitsu
C
ortex-M3 reset configuration
reset_config trst_only
reset_config trst_only
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -
chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -
dap $_CHIPNAME.dap
-# MB9BF506 has 64kB of SRAM on its main system bus
+# MB9BF506 has 64kB of SRAM on its main system bus
$_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
$_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
-# MB9BF506 has 512kB internal FLASH
+# MB9BF506 has 512kB internal FLASH
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
# 4MHz / 6 = 666kHz, so use 500
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
# 4MHz / 6 = 666kHz, so use 500
-adapter
_khz
500
+adapter
speed
500
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+ # if srst is not fitted use SYSRESETREQ to
+ # perform a soft reset
+ cortex_m reset_config sysresetreq
+}