projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
mips: optimize write code for speed
[fw/openocd]
/
tcl
/
target
/
at91sam7sx.cfg
diff --git
a/tcl/target/at91sam7sx.cfg
b/tcl/target/at91sam7sx.cfg
index 5cde979de0db9c364ef141fadc859fbeec807786..20e468999bf0ef521569e800a1847103047320a9 100644
(file)
--- a/
tcl/target/at91sam7sx.cfg
+++ b/
tcl/target/at91sam7sx.cfg
@@
-2,18
+2,18
@@
reset_config srst_only srst_pulls_trst
if { [info exists CHIPNAME] } {
reset_config srst_only srst_pulls_trst
if { [info exists CHIPNAME] } {
- set
_CHIPNAME $CHIPNAME
+ set _CHIPNAME $CHIPNAME
} else {
} else {
- set
_CHIPNAME at91sam7s
+ set _CHIPNAME at91sam7s
}
if { [info exists ENDIAN] } {
}
if { [info exists ENDIAN] } {
- set
_ENDIAN $ENDIAN
+ set _ENDIAN $ENDIAN
} else {
} else {
- set
_ENDIAN little
+ set _ENDIAN little
}
}
-if { [info exists CPUTAPID
] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x3f0f0f0f
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x3f0f0f0f
@@
-46,10
+46,8
@@
$_TARGETNAME configure -event reset-init {
sleep 100
}
sleep 100
}
-$_TARGETNAME configure -work-area-
virt 0 -work-area-
phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
-flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432