projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl/interface: add SPDX tag
[fw/openocd]
/
tcl
/
interface
/
raspberrypi-native.cfg
diff --git
a/tcl/interface/raspberrypi-native.cfg
b/tcl/interface/raspberrypi-native.cfg
index 2d0547f310d1b70f3f2b3949d77cffa6df3d70ec..6d5c3bfd4936c9eeffb33d3f80a5a3d28cc007c7 100644
(file)
--- a/
tcl/interface/raspberrypi-native.cfg
+++ b/
tcl/interface/raspberrypi-native.cfg
@@
-1,3
+1,5
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
#
# Config for using Raspberry Pi's expansion header
#
#
# Config for using Raspberry Pi's expansion header
#
@@
-10,28
+12,28
@@
adapter driver bcm2835gpio
adapter driver bcm2835gpio
-bcm2835gpio
_
peripheral_base 0x20000000
+bcm2835gpio
peripheral_base 0x20000000
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
-# bcm2835gpio
_
speed SPEED_COEFF SPEED_OFFSET
-bcm2835gpio
_
speed_coeffs 113714 28
+# bcm2835gpio
speed SPEED_COEFF SPEED_OFFSET
+bcm2835gpio
speed_coeffs 113714 28
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
-bcm2835gpio
_
jtag_nums 11 25 10 9
+bcm2835gpio
jtag_nums 11 25 10 9
# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 23 22
# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 23 22
-bcm2835gpio
_
swd_nums 11 25
+bcm2835gpio
swd_nums 11 25
# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18
# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18
-# bcm2835gpio
_
trst_num 7
+# bcm2835gpio
trst_num 7
# reset_config trst_only
# reset_config trst_only
-# bcm2835gpio
_
srst_num 24
+# bcm2835gpio
srst_num 24
# reset_config srst_only srst_push_pull
# or if you have both connected,
# reset_config srst_only srst_push_pull
# or if you have both connected,