projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
drivers/bcm2835gpio: Migrate to adapter gpio commands
[fw/openocd]
/
tcl
/
interface
/
raspberrypi-native.cfg
diff --git
a/tcl/interface/raspberrypi-native.cfg
b/tcl/interface/raspberrypi-native.cfg
index c63dfdbc759979678f41d6a2893e919ece727ee2..02a35635006063561ead1f12dd9d944c07d530a3 100644
(file)
--- a/
tcl/interface/raspberrypi-native.cfg
+++ b/
tcl/interface/raspberrypi-native.cfg
@@
-1,3
+1,5
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
#
# Config for using Raspberry Pi's expansion header
#
#
# Config for using Raspberry Pi's expansion header
#
@@
-8,30
+10,34
@@
# Do not forget the GND connection, pin 6 of the expansion header.
#
# Do not forget the GND connection, pin 6 of the expansion header.
#
-
interface
bcm2835gpio
+
adapter driver
bcm2835gpio
-bcm2835gpio
_
peripheral_base 0x20000000
+bcm2835gpio
peripheral_base 0x20000000
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
-# bcm2835gpio
_
speed SPEED_COEFF SPEED_OFFSET
-bcm2835gpio
_
speed_coeffs 113714 28
+# bcm2835gpio
speed SPEED_COEFF SPEED_OFFSET
+bcm2835gpio
speed_coeffs 113714 28
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
-bcm2835gpio_jtag_nums 11 25 10 9
+adapter gpio tck -chip 0 11
+adapter gpio tms -chip 0 25
+adapter gpio tdi -chip 0 10
+adapter gpio tdo -chip 0 9
# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 23 22
# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 23 22
-bcm2835gpio_swd_nums 11 25
+adapter gpio swclk -chip 0 11
+adapter gpio swdio -chip 0 25
# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18
# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18
-#
bcm2835gpio_trst_num
7
+#
adapter gpio trst -chip 0
7
# reset_config trst_only
# reset_config trst_only
-#
bcm2835gpio_srst_num
24
+#
adapter gpio srst -chip 0
24
# reset_config srst_only srst_push_pull
# or if you have both connected,
# reset_config srst_only srst_push_pull
# or if you have both connected,