projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
drivers/am335xgpio: Migrate to adapter gpio commands
[fw/openocd]
/
tcl
/
board
/
st_nucleo_h745zi.cfg
diff --git
a/tcl/board/st_nucleo_h745zi.cfg
b/tcl/board/st_nucleo_h745zi.cfg
index bb8a396b54db6ae572bcb7c1e63b4fd9393ae726..ad563b7d3125923599b60af511f8ecf24b9aae6a 100644
(file)
--- a/
tcl/board/st_nucleo_h745zi.cfg
+++ b/
tcl/board/st_nucleo_h745zi.cfg
@@
-1,16
+1,16
@@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
# This is an ST NUCLEO-H745ZI-Q board with single STM32H745ZITx chip.
# This is an ST NUCLEO-H745ZI-Q board with single STM32H745ZITx chip.
-source [find interface/stlink.cfg]
-transport select
hla
_swd
+source [find interface/stlink
-dap
.cfg]
+transport select
dapdirect
_swd
-# ST-Link HLA interface do not support multi-AP debugging
-# then setting DUAL_CORE and USE_CTI has no effect, because
-# it will fall back to single core configuration
+# STM32H745xx devices are dual core (Cortex-M7 and Cortex-M4)
set DUAL_CORE 1
set DUAL_CORE 1
+
+# enable CTI for cross halting both cores
set USE_CTI 1
source [find target/stm32h7x_dual_bank.cfg]
set USE_CTI 1
source [find target/stm32h7x_dual_bank.cfg]
-# when using ST-Link HLA adapter, DBGMCU accesses are done via AP0
-# unfortunately DBGMCU is not accessible when SRST is asserted
reset_config srst_only
reset_config srst_only