projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
Fix redbee config files
[fw/openocd]
/
tcl
/
board
/
hitex_str9-comstick.cfg
diff --git
a/tcl/board/hitex_str9-comstick.cfg
b/tcl/board/hitex_str9-comstick.cfg
index 25ff784dbe320dab70c160db65db526e4fd7ce8f..c85681b186ea4e4425f98241355dc59bcf29e17b 100644
(file)
--- a/
tcl/board/hitex_str9-comstick.cfg
+++ b/
tcl/board/hitex_str9-comstick.cfg
@@
-5,14
+5,19
@@
source [find interface/hitex_str9-comstick.cfg]
# set jtag speed
source [find interface/hitex_str9-comstick.cfg]
# set jtag speed
-
jtag
_khz 3000
+
adapter
_khz 3000
-
jtag
_nsrst_delay 100
+
adapter
_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+
+#
+# FIXME use the standard str912 target config; that script might need
+# updating to "-ignore-version" for the boundary scan TAP
+#
+# source [find target/str912.cfg]
+#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
@@
-50,8
+55,8
@@
if { [info exists BSTAPID ] } {
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
-set _TARGETNAME
[format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
-variant arm966e
+set _TARGETNAME
$_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-init {
# We can increase speed now that we know the target is halted.
$_TARGETNAME configure -event reset-init {
# We can increase speed now that we know the target is halted.
@@
-65,8
+70,10
@@
$_TARGETNAME configure -event reset-init {
flash protect 0 0 7 off
}
flash protect 0 0 7 off
}
-$_TARGETNAME configure -work-area-
virt 0 -work-area-
phys 0x50000000 -work-area-size 16384 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash0
+flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash1
+flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0