projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
jtag/jlink: switch to command 'adapter serial'
[fw/openocd]
/
tcl
/
board
/
hitex_str9-comstick.cfg
diff --git
a/tcl/board/hitex_str9-comstick.cfg
b/tcl/board/hitex_str9-comstick.cfg
index de4d56ddf576b79081d13e57c13533e94fd7a53a..3b9225213df0903d3dcc0ac3b4e33d97b27b2fd7 100644
(file)
--- a/
tcl/board/hitex_str9-comstick.cfg
+++ b/
tcl/board/hitex_str9-comstick.cfg
@@
-2,45
+2,50
@@
# http://www.hitex.com/index.php?id=383
# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
# http://www.hitex.com/index.php?id=383
# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
-source [find interface/hitex_str9-comstick.cfg]
+source [find interface/
ftdi/
hitex_str9-comstick.cfg]
# set jtag speed
# set jtag speed
-
jtag_khz
3000
+
adapter speed
3000
-
jtag_nsrst_
delay 100
+
adapter srst
delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
+#
+# FIXME use the standard str912 target config; that script might need
+# updating to "-ignore-version" for the boundary scan TAP
+#
+# source [find target/str912.cfg]
+#
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
set _CHIPNAME str912
}
set _CHIPNAME str912
}
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
set _ENDIAN little
}
set _ENDIAN little
}
-if { [info exists FLASHTAPID
] } {
+if { [info exists FLASHTAPID] } {
set _FLASHTAPID $FLASHTAPID
} else {
set _FLASHTAPID 0x04570041
}
jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
set _FLASHTAPID $FLASHTAPID
} else {
set _FLASHTAPID 0x04570041
}
jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
-if { [info exists CPUTAPID
] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x25966041
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x25966041
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-if { [info exists BSTAPID
] } {
+if { [info exists BSTAPID] } {
set _BSTAPID $BSTAPID
} else {
# Found on STR9-comStick, revision STR912CS-A1
set _BSTAPID $BSTAPID
} else {
# Found on STR9-comStick, revision STR912CS-A1
@@
-50,23
+55,25
@@
if { [info exists BSTAPID ] } {
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
-set _TARGETNAME
[format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
-variant arm966e
+set _TARGETNAME
$_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -event reset-init {
# We can increase speed now that we know the target is halted.
#jtag_rclk 3000
$_TARGETNAME configure -event reset-init {
# We can increase speed now that we know the target is halted.
#jtag_rclk 3000
-
+
# -- Enable 96K RAM
# PFQBC enabled / DTCM & AHB wait-states disabled
# -- Enable 96K RAM
# PFQBC enabled / DTCM & AHB wait-states disabled
- mww 0x5C002034 0x0191
+ mww 0x5C002034 0x0191
str9x flash_config 0 4 2 0 0x80000
flash protect 0 0 7 off
}
str9x flash_config 0 4 2 0 0x80000
flash protect 0 0 7 off
}
-$_TARGETNAME configure -work-area-
virt 0 -work-area-
phys 0x50000000 -work-area-size 16384 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash0
+flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash1
+flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0