projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
jtag/jlink: switch to command 'adapter serial'
[fw/openocd]
/
tcl
/
board
/
embedded-artists_lpc2478-32.cfg
diff --git
a/tcl/board/embedded-artists_lpc2478-32.cfg
b/tcl/board/embedded-artists_lpc2478-32.cfg
index 6c3aec64837fa49c87aa7f5db6c16d4356d57718..38f5e1b8eb3d1077c39e7d6aabd58eda8c9aa6ea 100644
(file)
--- a/
tcl/board/embedded-artists_lpc2478-32.cfg
+++ b/
tcl/board/embedded-artists_lpc2478-32.cfg
@@
-26,7
+26,7
@@
proc init_board {} {
global _CHIPNAME
# A working area will help speeding the flash programming
global _CHIPNAME
# A working area will help speeding the flash programming
- $_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr
0x10000-0x200-0x20
] -work-area-backup 0
+ $_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr
{0x10000-0x200-0x20}
] -work-area-backup 0
# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB)
flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe
# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB)
flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe
@@
-125,7
+125,7
@@
proc init_board {} {
#
proc enable_pll {} {
# Disconnect PLL in case it is already connected
#
proc enable_pll {} {
# Disconnect PLL in case it is already connected
- if {[expr
[read_register 0xE01FC080] & 0x03
] == 3} {
+ if {[expr
{[read_register 0xE01FC080] & 0x03}
] == 3} {
# Disconnect it, but leave it enabled
# (This MUST be done in two steps)
mww 0xE01FC080 0x00000001 ;# PLLCON: disconnect PLL
# Disconnect it, but leave it enabled
# (This MUST be done in two steps)
mww 0xE01FC080 0x00000001 ;# PLLCON: disconnect PLL
@@
-151,4
+151,3
@@
proc enable_pll {} {
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
}
mww 0xE01FC08C 0x000000AA ;# PLLFEED
mww 0xE01FC08C 0x00000055 ;# PLLFEED
}
-