projects
/
fw
/
openocd
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
tcl: Add support for Kontron SMARC-sAL28
[fw/openocd]
/
tcl
/
board
/
ek-lm3s1968.cfg
diff --git
a/tcl/board/ek-lm3s1968.cfg
b/tcl/board/ek-lm3s1968.cfg
index 28066f3f969fbdaa8d3fb7d8c004c960b37f547e..bbb04baa612b51d8bb760e199b45fcbeaa8342ab 100644
(file)
--- a/
tcl/board/ek-lm3s1968.cfg
+++ b/
tcl/board/ek-lm3s1968.cfg
@@
-1,22
+1,19
@@
#
# TI/Luminary Stellaris LM3S1968 Evaluation Kits
#
#
# TI/Luminary Stellaris LM3S1968 Evaluation Kits
#
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
# NOTE: to use J-Link instead of the on-board interface,
# NOTE: to use J-Link instead of the on-board interface,
-# you may also need to reduce adapter
_khz
to be about 1200.
+# you may also need to reduce adapter
speed
to be about 1200.
# source [find interface/jlink.cfg]
# include the FT2232 interface config for on-board JTAG interface
# source [find interface/jlink.cfg]
# include the FT2232 interface config for on-board JTAG interface
-source [find interface/luminary.cfg]
+# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
+# so is using in JTAG mode, as done here.
+source [find interface/ftdi/luminary.cfg]
# include the target config
# include the target config
-source [find target/lm3s1968.cfg]
-
-# jtag speed
-adapter_khz 3000
-
-adapter_nsrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s1968
+source [find target/stellaris.cfg]